8347888384
|
|
|
|
Sliding Gate Motor Ditec NEOS Series 800kg
KTI0200600D800
Sliding Gate Motor Ditec NEOS Series NEOS 800G 800kg
Max. leaf weight- 800kg
Stroke control - limit switch +virtual encoder
Maximum opening - 20 m
Duty class - 4 - heavy duty
Power supply- 230 Vac - 50/60 Hz
Motor power supply- 24 Vdc
Power input- 1,5 A
Thrust - 800 N
Opening and closing speed - 0.1 - 0.24 m/s
Release system for manual opening - key operated
Intermittent operation - S2 = 30 min; S3 = 60% (T=25°C)
Operating temperature- -20°C / +55°C
(-35°C / +55°C with NIO enabled)
Protection rating - IP 24D
Max. leaf weight- 800kg
Stroke control - limit switch +virtual encoder
Maximum opening - 20 m
Duty class - 4 - heavy duty
Power supply- 230 Vac - 50/60 Hz
Motor power supply- 24 Vdc
Power input- 1,5 A
Thrust - 800 N
Opening and closing speed - 0.1 - 0.24 m/s
Release system for manual opening - key operated
Intermittent operation - S2 = 30 min; S3 = 60% (T=25°C)
Operating temperature- -20°C / +55°C
(-35°C / +55°C with NIO enabled)
Protection rating - IP 24D
Product Description
GREATER STRENGTH
Ditec NEOS Green is available in three sizes: 500 kg, 800 kg and 1000 kg.
ZERO THOUGHTS: robust, durable, reliable over time
One-piece die-cast aluminium base for unrivalled strength.
Special high quality self-levelling grease that keeps screw and crown always lubricated.
Ttemperature sensor that adapts gearmotor performance in cold, ice or snow (NIO function - No Ice Option).
INSTALL AND CONFIGURE THE OPERATOR FASTER
Steel plates of different thickness and design for correct installation in all circumstances and levelling grains for operator adjustment to the millimeter.
IP24D degree of protection to avoid contact, even accidental, with live parts.
Self-learning procedure facilitated by display and navigation buttons for motor installation in just two steps.
Three predefined configurations for residential and condominium use. And that's not all: removable memory for saving operating parameters and duplicating them on another operator.
Supplied as standard with the new 433 and 868 MHz bi-frequency receiver (ref. RCB50E), to easily solve any radio interference problems.
UNIQUE PERFORMANCE
Ditec NEOS Green offers you an advanced CS12MG panel for more precise adjustment of all parameters and additional terminals for greater convenience during wiring operations.
Know the status of your operator! LEDs allow you to easily know the status of your operator without opening the ABS cover: correct operation, battery mode, unlock door open, fault or maintenance request.
Ditec NEOS Green is available in three sizes: 500 kg, 800 kg and 1000 kg.
ZERO THOUGHTS: robust, durable, reliable over time
One-piece die-cast aluminium base for unrivalled strength.
Special high quality self-levelling grease that keeps screw and crown always lubricated.
Ttemperature sensor that adapts gearmotor performance in cold, ice or snow (NIO function - No Ice Option).
INSTALL AND CONFIGURE THE OPERATOR FASTER
Steel plates of different thickness and design for correct installation in all circumstances and levelling grains for operator adjustment to the millimeter.
IP24D degree of protection to avoid contact, even accidental, with live parts.
Self-learning procedure facilitated by display and navigation buttons for motor installation in just two steps.
Three predefined configurations for residential and condominium use. And that's not all: removable memory for saving operating parameters and duplicating them on another operator.
Supplied as standard with the new 433 and 868 MHz bi-frequency receiver (ref. RCB50E), to easily solve any radio interference problems.
UNIQUE PERFORMANCE
Ditec NEOS Green offers you an advanced CS12MG panel for more precise adjustment of all parameters and additional terminals for greater convenience during wiring operations.
Know the status of your operator! LEDs allow you to easily know the status of your operator without opening the ABS cover: correct operation, battery mode, unlock door open, fault or maintenance request.
Read More
Sliding Gate Motor Ditec NEOS Series 800kg
KTI0200600D800
Price
₹ 71,010.00 excl. GST
+ 18.00% Tax + Freight Charge
Product Description
- Available Brands
- Unit
- HSN Code
- Warranty
- Resources
- Tags/categories
- Ditec
- NOS
- 85014019
- 12 Months No-Onsite Warranty
- Download Datasheet
Enter number of units to add to cart.
Usually dispatched within 8 days
.jpg)
