Answer:
The board provides two independent Form C relay outputs (NO, COM, NC) supporting fail-safe electromagnetic locks and fail-secure electric strikes, interfacing with NC magnetic door position sensors and dry-contact access triggers.
The KTI01003001E2DI is engineered to integrate with standard commercial access hardware across its CON1 (12-pin) and CON2 (10-pin) terminal blocks:
- Lock Hardware Outputs: Features two independent Form C relay outputs. Lock Output 1 is located on CON2 (Pin 5 NO, Pin 6 COM, Pin 7 NC) and Lock Output 2 is on CON2 (Pin 8 NO, Pin 9 COM, Pin 10 NC). This configuration allows direct control of fail-safe locks (such as electromagnetic locks wired via COM/NC) or fail-secure hardware (such as electric strikes or drop bolts wired via COM/NO).
- Door Position Feedback: CON2 provides dedicated inputs for normally closed dry-contact magnetic reed sensors: Door Sensor 1 connects across Pin 1 (NC) and Pin 2 (COM); Door Sensor 2 connects across Pin 3 (NC) and Pin 4 (COM).
- Trigger Inputs: CON1 accommodates entry and exit request signals for each door via dry-contact push buttons, biometric readers, or card reader relay outputs (Pin 3 & 4 for Door 1 Entry; Pin 5 & 6 for Door 1 Exit; Pin 7 & 8 for Door 2 Exit; Pin 9 & 10 for Door 2 Entry).