Product Information

Attribute

Value

Operation-Type

Rechargeable

Pelican 7060 Tactical Flashlight in black Xenoy body

Pelican 7060 Flashlight

KTI12005006P706

Product Description

The Pelican 7060 LED Tactical Flashlight is a high-performance patrol light developed in collaboration with the Los Angeles Police Department (LAPD) featuring dual-switch activation for tactical and duty operations.

Make: Pelican
Model: 7060
Light Source: LED
Output & Runtime (High Mode): 402 lumens, 3 h 30 min, 210 m beam distance, 11,078 cd
Output & Runtime (Medium Mode): 162 lumens, 12 h 0 min, 131 m beam distance, 4,312 cd
Output & Runtime (Low Mode): 18 lumens, 57 h 0 min, 45 m beam distance, 500 cd
Operating Modes: High, Strobe, Medium, Low, Momentary
Switch Configuration: Dual switch (3-way side body patrol switch and tactical tail switch)
Power Source: 1 x 3.7 V 18650 Lithium-Ion rechargeable battery
Recharge Time: 5 hours
Housing Materials: Xenoy resin body and shroud, Polycarbonate (PC) lens, EPDM O-ring
Environmental Ingress Protection: IPX4 splash resistance
Standard Compliance: ANSI/NEMA FL1 Standard

KTI12005006P706

Price

₹ 10,530.00 excl. GST

+ 18.00% GST. Freight after pincode at cart.

Registered dealers see net rates after login

Product Details
Available Brands	Pelican
Unit	Numbers
HSN Code	85131020
Weight	0.295 kg
Warranty	12 Months No-Onsite Warranty
Resources	Download Datasheet
Tags/categories	Security Metal Detector Solutions LED Searchlights

Usually dispatched within 11 days

About this product .

Constructed from high-strength Xenoy resin for both the body and shroud, the Pelican 7060 Tactical Flashlight is built to withstand demanding industrial handling and law enforcement patrol duty. The optical assembly features an impact-resistant Polycarbonate lens designed to protect the internal LED lamp against airborne debris and physical shocks. Sealing is maintained with an EPDM rubber O-ring to prevent dust and water infiltration during demanding outdoor operational cycles.
Tested and rated strictly to ANSI/NEMA FL1 measurement standards, the high-efficiency LED lamp provides three calibrated brightness levels alongside a tactical defensive strobe. In high output mode, the flashlight produces 402 lumens projecting an 11,078 candela beam across 210 meters for up to 3 hours 30 minutes. Medium mode delivers 162 lumens reaching 131 meters for 12 continuous hours, while low mode provides 18 lumens reaching 45 meters for up to 57 hours of prolonged runtime.
Co-developed directly with the Los Angeles Police Department (LAPD), the 7060 integrates dual-switch architecture combining a body-mounted patrol switch with a tail-mounted tactical switch. This dual-interface design allows security professionals to hold and operate the flashlight in multiple tactical or duty grips with full access to momentary activation, constant lighting, and strobe. Integrated self-programmable circuitry further enables users to customize light mode sequences based on standard operating procedures.
The lighting unit operates on a single 3.7 V 18650 Lithium-Ion rechargeable battery, requiring a 5-hour charging cycle. Designed for rapid deployment, the unit supports desk and vehicle dash charging cradles. When outfitting vehicles, the charger rig connects to an ignition-switched electrical feed to ensure reliable top-off without depleting the host vehicle electrical system.
Rated to an IPX4 environmental standard, the enclosure provides splash protection from all directions, ensuring dependable performance during adverse weather conditions. The Pelican 7060 delivers consistent optical clarity and reliable illumination across critical security applications, perimeter surveillance, financial institution protection, and industrial facility rounds.
For periodic preventive maintenance, the EPDM O-ring and housing threads should be inspected for particulate contamination and lubricated with silicone grease to maintain water sealing integrity. The rechargeable battery should be kept charged and protected against deep discharging to maximize cell longevity and duty cycle performance.

Product Information .

Worship Places Hospitals, Clinics Shopping Malls, Showrooms Public Roads Police Station Government Buildings, Offices Banks Chemical Plants High Security Zones Defense Sectors Auditorium Conference Hall Emergency Services

Pelican 7060 Charger Base Mounting and Electrical Installation

Mounting Architecture and Base Unit Overview

The Pelican 7060 LED Tactical Flashlight relies on the Pelican 7070 Desk/Dash Charger Base Unit for secure station docking, fleet vehicle integration, and battery recharging. Engineered for tactical patrol environments and high-security installations, the mounting assembly accommodates fixed desktop deployment, vertical wall or bulkhead mounting, and vehicle console integration. Safe and continuous electrical performance depends strictly on correct physical orientation, proper mechanical fastening, and deliberate electrical circuit routing.

Mechanical Fastening and Orientation Guidelines

The Pelican 7070 charger base is engineered with two pre-drilled mounting holes configured to accept standard #10 screws. Installers must secure the charger base to a flat, rigid substrate capable of supporting repetitive docking and un-docking cycles without flex or deformation. Prior to mechanically anchoring the charger base to the substrate, the right-angle electrical power plug must be fully inserted into the rear receptacle of the unit. Attempting to attach the charger base to a surface before inserting the right-angle plug will block connector clearance and can damage the power lead or housing.

Mounting orientation requires strict adherence to safety specifications. The charger base must never be installed upside-down. Inverted mounting introduces severe drop hazards during vehicle transit, high-vibration operation, or emergency maneuvers, which may cause the 8.65-inch (22 cm), 10.4 oz (295 g) Xenoy resin flashlight body to dislodge or eject from the docking cradle. Approved configurations include horizontal tabletop placement, horizontal console mounting, or upright vertical bulkhead mounting where retaining clips maintain positive mechanical engagement.

Vehicle Electrical Wiring and Direct Circuit Connection

When hardwiring the charging dock into patrol cars, perimeter response utility vehicles, or mobile command units, installation requires the Pelican 6061F Direct Wiring Rig for Fast Charger. Installers must connect the direct wiring leads strictly to an ignition key-switched power line rather than an unswitched, constant 12V battery line. Due to the high amperage draw of the fast-charging circuit, connecting the 6061F wiring rig directly to an unswitched battery circuit can drain the vehicle host battery during stationary or off-duty periods.

For modular or temporary vehicle setups, the Pelican 8056F 12V plug-in fast charger cord can be utilized via standard auxiliary 12V vehicle power sockets. For facility desktop or security checkpoint consoles, the included multi-regional power supply should be used with an appropriate regional AC outlet.

Commissioning and Charging Verification

Once the Pelican 7070 dock is mounted and wired, verify mechanical fit by seating the Pelican 7060 flashlight into the cradle. The unit utilizes a single 3.7V 18650 Lithium-Ion rechargeable battery; when replacement battery cells required (they are not included) are handled, ensure correct terminal orientation before final housing closure. A standard full charging cycle requires 5 hours. Ensure that the EPDM O-ring seal remains cleanly seated to maintain the flashlight's IPX4 water-splash resistance during routine field removal.

Installation Technical Specifications

Parameter	Specification
Charger Base Compatibility	Pelican 7070 Desk/Dash Charger Base Unit
Fastening Hardware Requirement	#10 Screws (2 mounting holes)
Cable Installation Order	Connect right-angle plug prior to fastening base
Vehicle Hardwire Configuration	Ignition key-switched 12V DC line via 6061F Direct Wiring Rig
Prohibited Mounting Orientation	Upside-down / inverted installation
Nominal Charge Duration	5 hours (3.7V Lithium-Ion 18650 platform)
Environmental Protection	IPX4 water-splash resistance (EPDM O-ring sealed)

Pelican 7060 Maintenance & Preventative Care Protocol

EPDM O-Ring Inspection and Housing Seal Care

The Pelican 7060 LED tactical flashlight relies on an internal EPDM rubber O-ring to seal the housing against particulate and water ingress, preserving its certified IPX4 environmental splash-resistance rating. Preventative maintenance protocols require periodic inspection of the EPDM O-ring for physical cuts, wear, particulate accumulation, and flattening. Whenever the Xenoy resin housing is unthreaded, clean the sealing surfaces with a dry, lint-free cloth.

To maintain proper seal integrity and prevent mechanical binding of the Xenoy resin threads, lubricate the threads, the O-ring groove, and the inside lip of the Polycarbonate (PC) lens with a uniform, thin film of silicone grease. Never apply petroleum-based lubricants or aggressive solvent chemicals to the assembly, as hydrocarbon compounds degrade EPDM rubber and weaken thermoplastic polymers.

Lithium-Ion Cell Handling and Charger Contact Maintenance

The unit is powered by a dedicated 3.7 V 18650 rechargeable Lithium-Ion battery (they are not included) or the Pelican 7069 replacement battery (they are not included) pack. To protect the electrochemical stability of the power source, avoid deep discharging of the Lithium-Ion battery (they are not included). Excessive depletion below operational thresholds can result in cell breakdown and cause the battery (they are not included) to vent hazardous electrolytes and volatile gases.

Establish a duty recharging schedule using the Pelican 7070 Desk/Dash Charger Base Unit. A depleted pack requires an uninterrupted 5-hour charging cycle. Regularly wipe the external metal charging terminals on the 8.65-inch (22 cm) black Xenoy flashlight body and inside the charger cradle using a clean, dry cotton swab to eliminate oil films, road dust, or oxidation that could degrade charging efficiency.

Optical Cleaning and Switch Integrity

The optical system utilizes a precision Polycarbonate (PC) lens shielded by a Xenoy resin shroud. Dirt, film deposits, and tactical field residues will reduce beam output below the rated 402 lumens on High (11,078 candela), 162 lumens on Medium (4,312 candela), and 18 lumens on Low (500 candela). Clean the Polycarbonate (PC) lens with clean water and a mild detergent using a soft microfiber cloth; avoid dry wiping or harsh abrasive compounds to prevent optical scratching.

Examine both the body-mounted patrol switch and the tail-mounted tactical switch during shift turn-overs. Confirm that both switch boots are free from compacted sand, grime, or mechanical obstructions, ensuring uninhibited activation through momentary, High, Strobe, Medium, and Low operational modes.

Vehicle Charging Hardware and Mount Inspection

When fleet installations utilize the Pelican 7070 Desk/Dash Charger Base Unit connected to either the 8056F 12V Plug-in Fast Charger Cord or the 6061F Direct Wiring Rig, verify that all mechanical mounting hardware remains secure. The charger base must be firmly affixed using two #10 screws. Never mount the charger base upside-down, as mechanical vibrations and vehicle movement can dislodge the 10.4 oz (295 g) flashlight from its cradle.

Electrical connections running through the 6061F direct wiring rig must be verified periodically to ensure the circuit connects strictly to an ignition key-switched line. Direct connection to a permanent, unswitched 12V feed will produce an ongoing standby draw capable of completely draining the host vehicle's battery (they are not included).

Preventative Maintenance Checklist

Component	Inspection Interval	Maintenance Procedure
EPDM O-Ring & Threads	Monthly / Post-Field Deployment	Inspect for cuts or dry rot; lubricate O-ring groove, Xenoy threads, and lens lip with silicone grease.
Polycarbonate (PC) Lens	Per Shift Turn-Over	Clean optical surface with mild detergent and water to ensure full lumen transmission.
3.7 V 18650 Battery (they are not included)	Shift End / Weekly	Recharge via 7070 charger base (5-hour cycle); avoid deep discharge conditions.
Dual Switch Mechanisms	Weekly	Test body patrol switch and tail tactical switch across all modes to confirm clean mechanical action.
Pelican 7070 Base & 6061F Rig	Monthly	Check #10 screw torque, verify right-angle plug seating, and confirm ignition-switched wiring feed.

Industrial, Defense, and Tactical Security Use Cases

Law Enforcement Patrol and Tactical Interventions

Engineered through a direct public-private collaboration between Pelican Products and the City of Los Angeles Police Department (LAPD), the Pelican 7060 LED Tactical Flashlight serves as standard-issue lighting for frontline patrol officers and tactical response units. During rapid clearing maneuvers and defensive operations, the dual-switch architecture allows operators to manipulate lighting controls irrespective of grip orientation. When using an overhand tactical hold alongside sidearms, personnel can activate the tail-mounted tactical switch for momentary illumination or constant beam engagement. During standard foot patrol duties, the body-mounted 3-way patrol switch provides an ergonomic underhand activation point.

The High output mode delivers 402 lumens with a peak beam intensity of 11,078 candela and a beam distance of 210 meters, enabling officers to identify potential threats, illuminate deep alleys, and inspect vehicle interiors from safe standoff distances. The integrated strobe mode provides high-intensity flashing for signaling and defensive disorientation, while the momentary function allows brief situational illumination without telegraphing position.

Perimeter Surveillance in Defense Sectors and High-Security Installations

For perimeter monitoring across defense sites, military checkpoints, and secure government installations, physical security personnel require adaptable illumination that balances long-distance reach with extended shift runtimes. The Pelican 7060 complies with ANSI/NEMA FL1 standards across three dedicated illumination levels:

High Mode (402 Lumens, 11,078 cd, 210 m beam): Provides 3 hours and 30 minutes of runtime for scanning outer security perimeters, boundary fences, and access points.
Medium Mode (162 Lumens, 4,312 cd, 131 m beam): Delivers 12 hours of runtime, covering a full work shift on a single charge for continuous perimeter surveillance and warehouse rounds.
Low Mode (18 Lumens, 500 cd, 45 m beam): Delivers an extended 57-hour runtime for close-up documentation checks, gate operations, and indoor facility navigation during reduced-lighting protocols.

Industrial Facility Security and Banking Installations

Critical commercial infrastructure, including banking installations, cash transit checkpoints, and industrial plants, presents harsh operating conditions. Built with a black Xenoy resin body, Xenoy shroud, and a Polycarbonate (PC) lens, the Pelican 7060 withstands impacts, abrasive contact, and rough handling. An EPDM rubber O-ring ensures an environmental seal rated to IPX4 splash resistance, protecting internal components during rain and wet outdoor duty.

Officers on active security patrols can integrate the light into standard duty gear using the Pelican 7077 plain leather holster or 7078 nylon holster. Measuring 8.65 inches (22 cm) in length and weighing 10.4 oz (295 g) with batteries (they are not included) and 8.2 oz (232 g) without batteries (they are not included), the unit remains balanced on duty belts during long shifts.

Mobile Security Fleets and In-Vehicle Charging Stations

Mobile security patrol fleets operating across industrial parks and transportation hubs require continuous charging capability inside response vehicles. The Pelican 7060 connects to the Pelican 7070 desk/dash charger base unit, which secures to console panels or flat cabin surfaces using two mounting holes designed for #10 screws. For vehicle installations, the charger connects via the 6061F direct wiring rig to an ignition-switched line or through the 8056F 12V plug-in adapter, preventing standby power drain on vehicle batteries (they are not included).

The system operates on a 3.7V 18650 Lithium-Ion rechargeable battery (they are not included) that reaches a complete replenishment cycle in a 5-hour charge time. Security operations centers can also deploy dedicated Pelican 7069 replacement battery (they are not included) units to support non-stop, multi-shift team handovers.

Related Products .

Page 1 of 12

Syncing...

Compare with similar products .

	Current Product Pelican 7060 Flashlight	FENIX ATEX FLP LED Torch WF11E	SuperLightweight, FullSize, Long Range Rechargeable Lantern	+ Add product to compare
SKU	KTI12005006P706	KTI12005001F11E	KTI12005008SFLR	—
Brand	Pelican	OEM	bright star	—
Price (excl. GST)	₹ 10,530.00 excl. GST	₹ 6,666.30 excl. GST	Ask for price	—
GST %	18.00%	18.00%		—
Beam Range	—	1500 Meter	—	—
Operation-Type	—	—	—	—
Watt	—	—	—	—
Certifications	—	—	—	—
Availability	Made to Order	Made to Order	Made to Order	—
			Ask for price	—