Udyogi 6250 GI emergency safety shower with yellow ABS eyewash bowl and foot pedal

Udyogi 6250 GI Emergency Shower Cum Eye Wash Fountain

KTI10012002GI50

Product Description

The Udyogi 6250 GI is a floor-mounted combination emergency drench shower and eyewash fountain designed for immediate decontamination in hazardous industrial environments.

Make / Brand: Udyogi
Model: 6250 GI
Piping Material: ISI marked Galvanized Iron (GI) with anti-corrosion powder coating
Shower & Eye Wash Bowl: High-visibility yellow chemical-resistant ABS plastic (Bowl diameter: 270 mm)
Shower Discharge Rate: Minimum 76 LPM at 2.1 kg/cm² (30 PSI)
Eye Wash Discharge Rate: Minimum 12 LPM at 2.1 kg/cm² (30 PSI)
Operating Pressure: 2.1 kg/cm² (30 PSI)
Valves: SS 304 stay-open ball valves (shower pull rod operated; eye wash push plate / foot pedal operated)
Inlet Connection: 1-¼ inch BSP / NB
Drain Connection: 1-¼ inch BSP / NB Tee
Compliance Standards: IS 10592:2018, ANSI Z358.1

KTI10012002GI50

Price

₹ 13,175.00 excl. GST

+ 18.00% Tax + Freight Charge

If you are an existing KTI Customer, Sign In to view your special price

Product Details
Available Brands	Udyogi
Unit	Numbers
HSN Code	73242900
Weight	17.8 kg
Warranty	Not Applicable
Tags/categories	Safety PPE Personal Protective Equipment Safety Shower
Standards	IS 10592:2018, ANSI Z358.1

Usually dispatched within 4 days

About this product .

The Udyogi 6250 GI combination safety station provides immediate whole-body drenching and targeted ocular flushing for personnel exposed to hazardous chemicals, corrosive acids, alkalis, or thermal risks in industrial facilities.
The structural framework is built using ISI marked Galvanized Iron (GI) piping finished with a durable, anti-corrosive powder coating. The high-visibility yellow receptor bowl and drench shower head are moulded from impact-resistant ABS plastic that withstands corrosive industrial atmospheres, chemical splashes, and oils.
Equipped with an SS 304 stay-open ball valve, the overhead shower activates immediately via a rigid triangular pull rod positioned within easy ergonomic reach (maximum 1752 mm from ground level) and delivers a minimum flow rate of 76 LPM at 2.1 kg/cm² operating pressure.
The integrated eye wash assembly delivers a soft-flow stream of at least 12 LPM across twin aerated atomiser heads spaced between 140 mm and 200 mm apart. It can be initiated rapidly by hand using a high-visibility push plate or by foot using the powder-coated floor pedal.
Engineered to satisfy stringent safety benchmarks, this unit is certified to both Indian Standard IS 10592:2018 and American National Standard ANSI Z358.1 for emergency eyewash and shower equipment.
This emergency station is engineered for chemical processing facilities, pharmaceutical manufacturing, metallurgy, automotive plants, acid handling areas, battery charging stations, and industrial test laboratories.
Routine maintenance is facilitated by automatic anti-dust flip covers that shield the aerated eyewash nozzles from airborne particulate accumulation during standby and open instantly under incoming water pressure during activation.

Product Information .

Industries, Factories Laboratries Chemical Plants Pharma Industries Construction Sites

Installation, Plumbing, and Mounting Guidelines

Proper mechanical mounting and piping alignment are critical to ensuring the Udyogi 6250 GI Emergency Shower Cum Eye Wash Fountain operates in compliance with IS 10592:2018 and ANSI Z358.1 standards. The complete floor-mounted assembly weighs 17.8 kg and must be positioned in accessible industrial zones, such as chemical processing, battery charging, spraying, and dipping areas, free from physical obstructions.

Plumbing and Hydraulic Supply Specifications

The combination unit requires a direct connection to an uninterruptible supply of clean drinking or tepid water. Pipework and hydraulic sizing must maintain sufficient continuous dynamic pressure during emergency operation to feed both drench and eyewash circuits:

Operating Hydraulic Pressure: 2.1 kg/cm² (30 PSI).
Water Inlet Connection: 1-¼ inches BSP / NB female thread, located at an inlet elevation of approximately 1400 mm to 1500 mm from the finished floor.
Drain / Water Outlet Connection: 1-¼ inches BSP / NB Tee fitting for wastewater collection and disposal pipe routing.
Shower Discharge Capacity: Delivers a minimum continuous flow rate of 76 LPM (litres per minute).
Eye Wash Discharge Capacity: Delivers a minimum continuous flow rate of 12 LPM (litres per minute).

Base Mounting and Mechanical Assembly

The unit is designed for rigid vertical installation onto a stable, level concrete surface using the integrated structural base plate:

Position the floor base plate over a flat, level surface capable of supporting the 17.8 kg tare weight plus dynamic water loads and operator forces during pull-rod actuation.
Anchor the base plate firmly to the industrial floor to prevent rocking, vibration, or bending when the pull rod or foot pedal is engaged.
Assemble the vertical Galvanized Iron (GI) powder-coated pipe columns using the provided pipe fittings.
Utilize the included 1-inch lock nut to adjust, square, and lock the upper bend pipe perpendicular to the operator station, orienting the yellow ABS shower head directly downward over the standing area.

Dimensional and Ergonomic Mounting Verification

When fully erected, verify all component heights and dimensional clearances against design criteria and IS 10592:2018 / ANSI Z358.1 parameters:

Assembly Component	Engineering Height / Spacing Specification
Shower Head Height	2100 mm to 2400 mm above finished floor level
Shower Pull Rod Max Height	1752 mm maximum above finished floor level
Water Inlet Elevation	1400 mm to 1500 mm approximate height
Eye Wash Receptor Bowl	270 ± 5 mm diameter yellow ABS bowl
Eye Wash Spray Heads Height	830 mm to 1140 mm above finished floor level
Twin Spray Heads Spacing	140 mm to 200 mm center-to-center distance

Valve Linkage and Pre-Commissioning Procedure

Before putting the system into service, all incoming supply lines must be thoroughly flushed to clear pipe scale, burrs, and debris that could foul the aerator nozzles or valve seats.

Connect the SS 304 stay-open shower ball valve mechanism to the vertical pull rod. Confirm that pulling downward immediately activates full continuous discharge without needing sustained manual pressure, remaining open until deliberately pushed back to the closed position. Connect the eye wash assembly's 1/2-inch SS 304 ball valve to both the GI powder-coated push plate and the GI powder-coated foot pedal. Verify that actuating either trigger fully opens the soft-flow twin automiser spray heads and automatically dislodges the protective anti-dust flip covers via line water pressure.

Industrial Applications & Deployment Environments for Udyogi 6250 GI

The Udyogi 6250 GI Emergency Shower Cum Eye Wash Fountain is engineered to provide rapid, hands-free decontamination across demanding industrial facilities handling toxic reagents, caustic compounds, and hazardous particulate matter. Designed to comply with IS 10592:2018 and ANSI Z358.1 standards, this combination drench shower and eyewash station delivers immediate high-volume irrigation to mitigate serious chemical injuries, ocular damage, and acid burns.

Chemical Processing and Petrochemical Refineries

In chemical manufacturing plants, intermediate synthesis units, and bulk storage tank farms, workers frequently transfer aggressive acids, alkalis, and solvents. The Udyogi 6250 GI is deployed adjacent to chemical dispensing points and sampling ports. If an accidental spill or pressurized line leak occurs, the overhead drench shower delivers a minimum flushing volume of 76 LPM at an operating pressure of 2.1 kg/cm² (30 PSI), quickly saturating work apparel and diluting corrosive chemicals across the entire body.

Battery Charging and Energy Storage Areas

Industrial battery charging rooms for forklift fleets and stationary backup power banks present severe chemical splash hazards from sulfuric acid electrolytes. Workers handling battery top-ups or maintenance risk direct acid splashing to the face and eyes. Positioned within immediate reach of charging bays, the unit's twin aerated eyewash heads supply a continuous stream of at least 12 LPM. The dual push-plate or foot-pedal activation allows operators with compromised vision or chemical-covered hands to activate full-flow irrigation instantly.

Pharmaceutical Synthesis and Testing Laboratories

Research, quality control, and pilot plant laboratories regularly handle concentrated reagents, organic compounds, and volatile solvents in bench-top and fume-hood environments. The 6250 GI combination design allows safety engineers to satisfy both whole-body and localized ocular safety requirements within a single footprint. Its high-visibility yellow ABS receptor bowl and shower head ensure prompt visual identification during sudden emergency incidents.

Spraying, Dipping, and Metal Finishing Operations

Surface treatment plants, electroplating shops, and industrial coating facilities run open dipping vats, pickling baths, and automated spray lines containing hot caustic solutions and acidic etchants. Operators exposed to aerosolized mists or splashback rely on the unit's quick-operating SS 304 stay-open valves. Once the pull rod is engaged (positioned at a maximum height of 1752 mm from the ground), the valve stays open without continuous manual contact, freeing both hands to peel away contaminated protective clothing while standing under the flushing stream.

Automotive Manufacturing and Heavy Engineering Facilities

Automotive assembly lines, machining plants, and steel handling workshops utilize harsh degreasers, hydraulic fluids, and airborne abrasives. Ambient dust and particulates in these heavy industrial environments can clog unprotected plumbing. The 6250 GI incorporates automatic anti-dust flip covers over its automiser spray heads; these covers seal out airborne foreign material during standby and swing open automatically via water line pressure upon activation.

Mining Operations and Bulk Extraction Sites

Ore extraction and mineral processing plants maintain mineral leaching circuits, reagent mixing plants, and slurry distribution hubs. The rugged ISI-marked Galvanized Iron (GI) framework, treated with anti-corrosion powder coating, provides the structural rigidity and environmental resilience needed to withstand corrosive outdoor and semi-sheltered plant atmospheres.

Industry / Facility	Primary Exposure Hazard	Protective Function Utilized
Chemical & Mining Plants	Bulk corrosive reagents, acid slurry, alkali leaks	76 LPM overhead drench shower via SS 304 stay-open pull-rod valve
Battery Charging Areas	Sulfuric acid splash during maintenance & cell filling	12 LPM aerated twin eyewash heads via push plate or foot pedal
Laboratories & Pharma	Volatile solvents, small-batch acid/base handling	Full-face rinsing with high-visibility chemical-resistant ABS bowl
Dipping & Spraying Facilities	Aerosols, caustic wash tanks, chemical bath vats	Hands-free continuous flushing while removing saturated garments
Automotive & Steel Plants	Airborne grinding dust, industrial lubricants, solvents	Anti-dust flip-cover protection for hygienic ocular wash delivery

Related Products .

Page 1 of 5

Syncing...

Compare with similar products .

	Current Product Udyogi 6250 GI Emergency Shower Cum Eye Wash Fountain	Safety Shower SS304 Model SS06	Safety Shower GISU1092	+ Add product to compare
SKU	KTI10012002GI50	KTI10012002SS06	KTI10012002GI92	—
Brand	Udyogi	Unisafe	—	—
Price (excl. GST)	₹ 13,175.00 excl. GST	₹ 28,375.00 excl. GST	₹ 8,772.00 excl. GST	—
GST %	18.00%	18.00%	18.00%	—
Certifications	ANSI Z358.1, IS 10592:2018	IS 10592:2018	—	—
Availability	Made to Order	Made to Order	Made to Order	—
				—