Udhyogi 6250 SS floor mounted safety shower and eyewash station with foot pedal

Udyogi Safety Shower 6250 SS

KTI10012002S304

Product Description

The Udhyogi 6250 SS is a floor-mounted combination emergency safety drench shower and eyewash station engineered from corrosion-resistant Grade 304 stainless steel for rapid industrial chemical decontamination.

Make / Brand: Udhyogi Safety
Model: 6250 SS (SSSU-2011 / 6250-SS-S)
Material of Construction: SS 304 pipework, stay-open ball valves, deluge shower head, and 260 mm eyewash receptor bowl
Shower Discharge Rate: Minimum 76 LPM (overhead drench head)
Eyewash Discharge Rate: Minimum 12 LPM (twin soft-flow foam-generating atomizers with aerators and pop-off dust covers)
Shower Head Height: 2100 mm to 2400 mm above finished floor level
Actuation Mechanisms: Deluge shower via pull rod; eyewash dual push-plate and stainless steel foot pedal for hands-free operation
Plumbing Connections: 1-1/4 inch NB (BSP) water inlet; 1-1/4 inch NB (BSP) drain outlet
Base Mounting: 180 mm diameter floor base plate with 4 x 13 mm holes on a 150 mm PCD
Standards Compliance: IS 10592:2018, ANSI/ISEA Z358.1

KTI10012002S304

Price

₹ 28,815.00 excl. GST

+ 18.00% Tax + Freight Charge

If you are an existing KTI Customer, Sign In to view your special price

Product Details
Available Brands	Udyogi
Unit	Numbers
HSN Code	73242900
Weight	4.2 kg
Warranty	Not Applicable
Tags/categories	Safety PPE Personal Protective Equipment Safety Shower
Standards	IS 10592:2018, ANSI Z358.1

Usually dispatched within 3 days

About this product .

The Udhyogi 6250 SS combination safety shower and eyewash station is constructed from Grade 304 stainless steel, encompassing all structural piping, fittings, stay-open ball valves, and the 260 mm diameter receptor bowl. This robust stainless steel fabrication provides high resistance against harsh industrial chemicals, alkalis, acids, and atmospheric corrosion, ensuring operational readiness in demanding factory environments.
The overhead drench shower delivers an immediate high-volume deluge at a minimum flow rate of 76 litres per minute (LPM), effectively flushing corrosive contaminants from clothing and body surfaces. Positioned between 2100 mm and 2400 mm above floor level, the showerhead distributes water evenly to maximize coverage while maintaining full standard-compliant rinsing velocity.
The integrated eyewash station features twin soft-flow foam-generating atomizer heads equipped with aerators to control spray diameter and mitigate forceful splashing against sensitive ocular tissue. The eyewash unit is activated via a large stainless steel push plate or a heavy-duty floor-mounted foot pedal, enabling prompt hands-free operation while automatic pop-off covers protect the spray orifices from airborne dust and grit.
Designed for rigid floor anchoring, the station features an 180 mm base plate with four 13 mm holes arranged on a 150 mm pitch circle diameter (PCD). The system integrates standard 1-1/4 inch NB threaded plumbing connections for both the main uninterruptible potable water inlet and the dedicated drain outlet, ensuring seamless integration into industrial piping loops.
Manufactured to stringent safety benchmarks, the Udhyogi 6250 SS complies with Indian Standard IS 10592:2018 for emergency eyewash and shower equipment and meets the international performance criteria of ANSI/ISEA Z358.1. These certifications assure plant safety officers that discharge volumes, stream velocity, and valve ergonomics align fully with occupational safety statutory requirements.
This combination emergency station is widely deployed across chemical plants, pharmaceutical manufacturing facilities, metallurgical workshops, automotive paint booths, battery charging rooms, and analytical testing laboratories. Its dual-function layout ensures rapid first-aid decontamination within reach of high-risk acid, alkali, and toxic chemical handling zones.
Routine facility maintenance requires periodic operation of the stay-open ball valves to flush lines, eliminate sediment buildup, and confirm compliance with minimum flow thresholds. Facility managers should also routinely inspect the atomizer aerator filters and verify that dust covers lift freely under water pressure to maintain continuous emergency readiness.

Product Information .

Industries, Factories Laboratries Chemical Plants Pharma Industries Construction Sites

Installation, Plumbing Connections, and Mechanical Mounting

Proper installation of the Udyogi 6250 SS (SSSU-2011) floor-mounted combination emergency safety shower and eyewash fountain ensures compliant, instantaneous decontamination across chemical manufacturing, pharmaceutical facilities, battery charging areas, and industrial laboratories. Mechanical erection and plumbing integration must conform strictly to IS 10592:2018 and ANSI Z358.1 engineering guidelines.

Base Flange Foundation & Floor Anchoring

The unit features a rigid Grade 304 stainless steel base plate designed for secure floor anchoring onto a level, structurally reinforced concrete pad. Accurate alignment guarantees structural stability and positions the overhead deluge shower head within the standardized clearance height of 2100 mm to 2400 mm above the finished floor surface.

Base Plate Diameter: 180 ± 5 mm circular flange
Pitch Circle Diameter (PCD): 150 ± 2 mm
Anchor Bolt Holes: 4 holes measuring 13 ± 2 mm diameter
Fasteners Required: Four 12 mm or 1/2-inch corrosion-resistant anchor studs or expansion bolts (secured to a level concrete substrate)
Clearance Footprint: Maintain unobstructed floor access around the 260 ± 5 mm diameter receptor bowl and overhead deluge perimeter

Plumbing Integration: Inlet Supply & Waste Drainage

The unit connects to an uninterrupted, dedicated potable water supply line capable of delivering sustained hydraulic volume without sudden pressure drops during concurrent facility operations. Both the supply feed and waste run utilize standard industrial threading compatible with plant utility networks or dedicated gravity-fed loops.

Inlet Connection Size: 1-1/4 inch NB (Nominal Bore) / BSP female threaded connection
Drain/Outlet Connection Size: 1-1/4 inch NB (Nominal Bore) / BSP discharge piping
Shower Flow Requirement: Continuous minimum delivery of 76 LPM (litres per minute) to the drench head
Eyewash Flow Requirement: Continuous minimum delivery of 12 LPM (litres per minute) to the twin atomizers
Supply Quality: Potable water line flushed thoroughly before final hookup to eliminate pipe scale, weld spatter, or debris that could foul internal aerator filters

Actuator Linkages: Dual Hand and Foot Activation

The 6250 SS incorporates independent SS 304 stay-open through-passage operating ball valves that remain fully open until manually reset by facility personnel. During installation, verify free mechanical movement across all mechanical linkages:

Overhead Drench Shower: Connect and suspend the rigid SS 304 pull rod to the top ball valve operating lever, verifying that vertical downward travel fully engages the valve open position.
Eyewash Push Plate: Check the mechanical throw of the hand-operated push plate to confirm smooth rotation into the detented stay-open position.
Foot Pedal Mechanism: Verify that the base-mounted stainless steel foot pedal linkage couples directly to the eyewash push plate assembly, providing immediate hands-free flow control upon downward foot pressure.

Pre-Commissioning Flushing & Hydraulic Verification

Before operational turnover, execute a multi-point hydraulic commissioning sequence to validate IS 10592:2018 performance parameters:

Open the main isolation supply valve and purge the lines through both activation mechanisms.
Actuate the pull rod to verify that the overhead shower head maintains an uninterrupted deluge volume of at least 76 LPM.
Depress the push plate or foot pedal to inspect the eyewash stream: ensure water pressure automatically lifts the pop-off dust covers off the twin soft-flow foam-generating atomizers.
Inspect the aerator filters to confirm straight, balanced streams with minimal splashing across the 260 mm diameter receptor bowl at a minimum rate of 12 LPM.
Check all 1-1/4 inch NB threaded joints and SS 304 pipe unions for zero leakage under full line pressure.

Preventive Maintenance and Inspection Procedures

Routine maintenance and systematic operational testing of the Udyogi 6250 SS floor-mounted combination safety shower and eyewash fountain (KT reference: KTI10012002S304) ensure immediate mechanical reliability during chemical or thermal burn emergencies. All maintenance workflows, discharge rate audits, and inspection intervals should comply with the parameters outlined in Indian Standard IS 10592:2018 and ANSI/ISEA Z358.1.

Periodic Activation and Flow Rate Verification

Emergency eyewash and deluge stations connected to uninterrupted potable water networks require regular functional flushing to purge stagnant line fluid, eliminate sediment accumulation, and verify unrestricted water pathways through the straight-body SS 304 pipework:

Overhead Deluge Shower Flush: Actuate the upper drench shower by pulling down the rigid pull rod. Verify that the SS 304 stay-open through-passage ball valve opens rapidly and remains fully open without operator intervention. Confirm that the discharge rate meets the required minimum delivery volume of 76 LPM (litres per minute) across the installation height plane (positioned between 2100 mm and 2400 mm above the finished floor). Manually close the stay-open valve by pushing the rod back into the resting position after verifying flow.
Eyewash Fountain Flush: Trigger the lower eyewash assembly independently using the hand push plate, and separately test activation via the foot pedal. Ensure that the SS 304 stay-open ball valve locks open hands-free and discharges a continuous water stream satisfying the minimum 12 LPM specification. Check that water drainage flows directly through the 1-1/4 inch NB outlet connection without pooling or overflowing the 260 ± 5 mm diameter receptor bowl.

Atomizer Head, Filter, and Pop-Off Cover Servicing

The eyewash unit relies on twin soft-flow foam-generating atomizers equipped with aerators to control spray diameter, stabilize stream straightness, and reduce fluid splash around ocular tissue. Maintenance tasks for the delivery heads include:

Dust Cover Inspection: Check the pop-off dust covers seated over the atomizer heads. Ensure they are free from mechanical sticking, chemical dust, or heavy particulate build-up. When water is activated, the protective covers must lift and flip off automatically under line water pressure; once testing concludes, wipe the covers clean and reseat them firmly over each nozzle.
Aerator and Filter Cleaning: Dissolved minerals, scale, and pipe grit can collect inside the foam-generating aerator screens and internal filters. Periodically disassemble the atomizer head aerators to inspect the mesh filters. Rinse away trapped particulates using a clean water flush or approved descaling solution compatible with Grade 304 stainless steel, restoring an even, aerated flow profile.

Mechanical Actuation Linkage and Valve Checks

Inspect the mechanical interfaces controlling the valves to confirm smooth, instant operation:

Foot Pedal and Push Plate Linkage: Inspect the mechanical linkage connecting the base-level stainless steel foot pedal to the push plate. Verify that pressing the foot pedal fully rotates the stay-open valve without mechanical slop, binding, or misalignment.
Valve Seating: Inspect the Grade 304 stainless steel ball valves along both the overhead shower and eyewash supply lines for any signs of weeping, gland packing seepage, or failure to seal completely when pushed to the closed position.

Structural Base and Plumbing Connection Audits

Because these units are deployed in aggressive environments—such as battery charging rooms, steel manufacturing facilities, chemical process areas, and dipping operations—inspect external structural points:

Base Plate Anchoring: Check the 180 ± 5 mm diameter base plate. Ensure all 4 anchor bolts passing through the 13 ± 2 mm bolting holes across the 150 ± 2 mm Pitch Circle Diameter (PCD) remain firmly torqued to the floor foundation to eliminate wobbling or mechanical deflection.
Plumbing Connections: Verify the mechanical integrity of the 1-1/4 inch NB water inlet supply connection and the 1-1/4 inch NB drain fitting, ensuring leak-free thread engagement under continuous static water pressure.
Stainless Steel Cleaning: Wipe down the SS 304 pipe surfaces, deluge shower head, and 260 ± 5 mm bowl to prevent heavy surface encrustation from airborne acids, alkalis, and industrial process oils.

Industrial Use Cases and Deployment Scenarios

The Udhyogi 6250 SS (cataloged under reference KTI10012002S304 and model designations 6250-SS-S / SSSU-2011) is a floor-mounted combination emergency drench shower and eyewash fountain. Engineered entirely from Grade 304 stainless steel (SS 304), the unit delivers rapid physical decontamination across environments containing aggressive acids, alkalis, and hazardous chemical compounds. Designed in compliance with IS 10592:2018 and ANSI Z358.1, the assembly provides an overhead shower discharge of at least 76 LPM alongside an eyewash delivery of at least 12 LPM, satisfying rigorous EHS standards for rapid flushes.

Chemical Manufacturing, Dispensing, and Transfer Bays

In chemical processing plants and bulk liquid transfer depots, personnel face continuous splash risks during reactor sampling, tank charging, and hazardous fluid transfer. The 6250 SS provides an immediate flushing barrier for acid and chemical spillage. The pull-rod-activated deluge shower delivers rapid total-body rinsing from a shower head height between 2100 mm and 2400 mm, drenching hazardous liquid off chemical suits and exposed skin before deep dermal burns can take place.

Battery Charging Rooms and Electrical Sub-Stations

Industrial battery charging areas, where forklift and plant machinery traction batteries undergo regular electrolyte servicing, contain significant concentrations of corrosive sulfuric acid. In the event of a casing rupture or boiling acid splash, personnel need instant eyewash access. The twin soft-flow foam-generating atomizers feature aerators that mitigate excessive water splash against damaged ocular tissue, while the integrated foot pedal enables hands-free activation if workers' hands are contaminated or temporarily immobilized.

Metallurgical Facilities and Steel Processing Operations

Steel processing, hot-dip plants, and metallurgical pickling lines expose floor technicians to harsh pickling baths containing hydrochloric and sulfuric acids. The Grade 304 stainless steel construction of the supply piping, 260 ± 5 mm receptor bowl, base plate, and stay-open ball valves ensures structural resilience in corrosive, high-humidity, and acidic atmospheres, preventing mechanical failure caused by chemical vapor exposure.

Pharmaceutical Processing and Research Laboratories

Laboratories and clean pharmaceutical formulation suites handle concentrated reagents, solvents, and biological agents. The twin atomizers are fitted with pop-off covers that seal out ambient dust, powders, and contaminants during standard facility operation, opening automatically via incoming water pressure when the push plate or foot pedal is engaged. This ensures the eyewash stream remains pristine upon emergency activation.

Automotive Dipping, Painting, and Spraying Lines

Automobile dipping facilities, solvent degreasing lines, and high-volume spraying stations utilize flammable solvents, primers, and caustic dipping agents. Strategically anchoring the unit via its 180 ± 5 mm base plate (utilizing 4 bolting holes on a 150 ± 2 mm PCD) along these production lines ensures compliant emergency response times near dipping tanks and chemical mixing equipment.

Facility Deployment Summary

Deployment Environment	Primary Chemical / Physical Hazard	Key Functional Mechanism	Operational Standard
Chemical Bulk Handling	Acid and alkali liquid spillage	Pull-rod overhead drench shower (76 LPM minimum)	IS 10592:2018 / ANSI Z358.1
Battery Charging Rooms	Corrosive sulfuric acid electrolyte splashes	Hands-free foot pedal eyewash actuation (12 LPM minimum)	IS 10592:2018 / ANSI Z358.1
Steel Pickling & Metallurgy	Acidic vapors, corrosive pickling baths	Corrosion-resistant SS 304 supply piping and bowl	IS 10592:2018 / ANSI Z358.1
Testing Laboratories	Reagents, solvents, airborne powders	Twin atomizers with aerators and pop-off dust covers	IS 10592:2018 / ANSI Z358.1
Automotive Dipping Operations	Industrial solvents, caustic pretreatments	Dual push-plate / foot-pedal hands-free eyewash	IS 10592:2018 / ANSI Z358.1

Related Products .

Page 1 of 5

Syncing...

Compare with similar products .

	Current Product Udyogi Safety Shower 6250 SS	Safety Shower Unisafe brand Model US GI 05	Unicare Portable Pressurized eyewash	+ Add product to compare
SKU	KTI10012002S304	KTI10012002GI05	KTI10012002UPPE	—
Brand	Udyogi	Unisafe	Unicare	—
Price (excl. GST)	₹ 28,815.00 excl. GST	₹ 8,437.50 excl. GST	Ask for price	—
GST %	18.00%	18.00%		—
Certifications	ANSI Z358.1, IS 10592:2018	IS 10592:2018	ANSI Z358.1, AS 4775, EN 15154-4, IS 10592:2018	—
Availability	Made to Order	Made to Order	Made to Order	—
			Ask for price	—