The Ahuja SRX-250®DXM is a 200W RMS two-way passive PA speaker system engineered for medium-to-large sound reinforcement applications. Featuring two 12” (304.8 mm) low-frequency dual cone drivers with Ø1.5” (38.1 mm) voice coils, a 3” × 6” (76.2 × 152.4 mm) high-frequency piezo horn tweeter, and a wide frequency response spanning 55 Hz to 20,000 Hz, this speaker delivers high acoustic output with a continuous sensitivity of 100 dB SPL (1W/1m) and peak sound pressure levels up to 123 dB.
Auditoriums, Community Halls, and Institutional Venues
In municipal halls, corporate auditoriums, and educational assembly spaces, speech intelligibility and consistent sound distribution are paramount. The SRX-250®DXM provides clear vocal projection across broad listening areas without requiring excessive amplification overhead. Its dual 12” driver array reproduces clean mid-bass and speech fundamentals, while the tuned piezo horn delivers crisp high-frequency dispersion for spoken presentations, lectures, and panel discussions.
Religious Gathering Spaces and Places of Worship
Houses of worship require balanced acoustic reinforcement that handles both spoken sermons and devotional music. The free-flow flared bass reflex port extends low-end acoustic response down to 55 Hz, ensuring full-bodied reproduction of acoustic instruments, harmoniums, and vocal chants. The carpet-covered 18 mm board enclosure minimizes internal cabinet resonance, preserving signal purity in highly reverberant architectural spaces.
Live Music Reinforcement and DJ Sound Systems
For mobile DJs, event planners, and live acoustic performance stages, the SRX-250®DXM serves as a high-efficiency front-of-house (FOH) or side-fill loudspeaker. With an 8 Ω nominal impedance, system engineers can wire two units in parallel per channel to present a 4 Ω composite load, matching standard industrial PA booster and power amplifier output taps to maximize available wattage output.
Indoor and Outdoor Event Sound Coverage
The speaker is structured for temporary and permanent installations across outdoor exhibition grounds, sports pavilions, and public gathering zones:
- Floor-Standing Operation: The vertical 845 mm column enclosure functions as a standalone floor-standing unit for direct stage sound delivery.
- Pole/Stand Elevation: An integrated stand mount adaptor socket built into the bottom base allows elevated mounting to project clear acoustic output over standing audiences.
- Flexible I/O Connectivity: Dual input provisions—a standard 1/4” (6.35 mm) phone jack and an industrial terminal strip—accommodate both quick-disconnect portable cabling and secure bare-wire permanent installations.
- Transit Durability: Fitted with ergonomically positioned carrying handles, a perforated protective front grille, and an abrasion-resistant carpet finish, the 26.0 kg cabinet withstands repeated handling across event deployments.
Application Compatibility Matrix
| Deployment Environment | Primary Audio Requirement | Mounting & Configuration |
|---|
| Auditoriums & Halls | Even vocal clarity and high SPL headroom | Elevated stand mount via base socket |
| Places of Worship | Natural voice & full-range music (55–20,000 Hz) | Floor-standing or elevated placement |
| Live Stage / DJ Setups | High-output 200W RMS dynamic reinforcement | Parallel 4 Ω pair per amplifier channel |
| Outdoor Commercial Events | Robust acoustic throw (123 dB max SPL) | Elevated pole mount via terminal strip wiring |
8347888384
