What are the electrical, lamp, and backup specifications of the Prolite PEL 120 EM exit light?

The Prolite PEL 120 EM operates on ~230 V AC (50 Hz) and powers one 18/20 W T-12 fluorescent lamp via a G13 rotor holder. It provides a rated emergency backup duration of 180 minutes (+10%) supported by an internal rechargeable Sealed Lead Acid (SLA) battery (they are not included) with a 10 to 12 hour recharge cycle.

What materials and construction standards are used in the Prolite PEL 120 EM housing and diffuser?

The housing and internal reflector are fabricated from 22 S.W.G. Cold Rolled Close Annealed (C.R.C.A.) sheet steel finished in white epoxy polyester powder coating. The front panel features a 2 mm milky acrylic diffuser with CAD-designed vinyl lettering, conforming to IS : 9583 – 1981.

Which fluorescent lamp brands and mounting methods are compatible with the Prolite PEL 120 EM?

The fixture accommodates standard 18 W and 20 W T-12 fluorescent lamps (G13 base) from manufacturers such as Osram, Philips, and Surya. It supports direct surface mounting on walls or ceilings via two pre-drilled holes.

What is the HSN classification and compliance standard for the Prolite PEL 120 EM?

The Prolite PEL 120 EM is categorized under HSN code 85131090 and conforms to Indian Standard IS : 9583 – 1981 for emergency lighting units.

What is the product Emergency Lights also known as?

Emergency Lamps, Rechargeable Emergency Lights, LED Emergency Lights, Power Failure Lights, Portable Emergency Lights, Emergency Backup Lights, Battery Operated Lights, Emergency Light Fixtures, Compact Emergency Lights, Emergency Lighting Solutions, Indoor Emergency Lights, Outdoor Emergency Lights, Safety Emergency Lights, Emergency Lighting System, Rechargeable Torch Lights

What are emergency lights?

Emergency lights are lighting fixtures that are specifically designed to provide illumination during power outages or emergencies. They are equipped with backup power sources, such as batteries, to ensure continuous lighting when the main power supply fails.

Where are emergency lights used?

Emergency lights are used in various settings, including commercial buildings, residential buildings, schools, hospitals, industrial facilities, and public spaces. They are installed in hallways, stairwells, exit routes, emergency exits, and other critical areas where visibility is crucial during emergencies.

What are the different types of emergency lights?

There are different types of emergency lights available, including: Exit signs with built-in emergency lights: These signs are installed above exit doors and provide clear indications of the nearest exit. They also feature emergency lights to ensure visibility in case of power outages. Standalone emergency lights: These are standalone fixtures that are typically wall-mounted or ceiling-mounted. They contain built-in batteries and provide illumination in specific areas or along escape routes. Emergency lighting units: These are larger units that can provide higher levels of illumination and are commonly used in larger spaces or high-ceiling areas.

How long do emergency lights operate during a power outage?

The duration of operation for emergency lights depends on various factors, including the type of emergency light, battery capacity, and power consumption. Generally, emergency lights are designed to operate for a minimum of 90 minutes to ensure sufficient time for evacuation or until the main power supply is restored.

Prolite PEL 120 EM emergency exit light with milky acrylic diffuser and white powder coated steel housing

Exit Light Prolite PEL 120 EM

KTI17001002PEXI

Product Description

The Prolite PEL 120 EM is a heavy-duty maintained emergency exit luminaire engineered for continuous operation on AC mains and automatic illumination during power failures.

Brand: Prolite
Model: PEL120 E/M (PEL 120 EM)
Operating Mode: Maintained exit luminaire
Lamp Type: 1 x FT-L (T-12) 18/20 Watts fluorescent tube
Lamp Holder: G13 base rotor holder, white polycarbonate/ABS with electrical grade brass contacts
Emergency Backup Duration: 180 minutes (3 hours) + 10%
Battery Type: Rechargeable Sealed Lead Acid (SLA) battery
Recharging Cycle: 10 to 12 hours full recharge period
Operating Voltage: ~230 V AC, 50 Hz
Mains Connector: 5 A, 250 V milky white polycarbonate connector with brass contacts
Status Indicator: Red LED illuminates 'ON' during charging
Housing Construction: 22 SWG C.R.C.A. sheet steel with white epoxy polyester powder coating
Diffuser Panel: 2 mm milky acrylic diffuser with precision CAD cut vinyl legend
Reflector: 22 SWG C.R.C.A. sheet steel, white powder coated
Ingress Protection: IP-20
Mounting: Surface mounting on wall or ceiling via 2 holes
Standard Compliance: IS : 9583 – 1981

KTI17001002PEXI

Price

₹ 5,616.00 excl. GST

+ 18.00% GST. Freight after pincode at cart.

Product Details
Available Brands	Prolite
Unit	Numbers
HSN Code	85131090
Weight	4 kg
Warranty	Not Applicable
Resources	Download Specification
Tags/categories	Safety Signage Solutions Emergency Lights
Standards	IS 10322

Usually dispatched within 12 days

Parameter	Specification / Requirement
Mounting Configuration	Surface mounting on wall or ceiling via 2 pre-drilled holes
Enclosure Weight	Approximately 4 kg
Ingress Protection	IP-20 (dry indoor applications)
Electrical Input	~230 Volts AC, 50 Hz
Mains Terminal Block	5 A, 250 Volts, milky white polycarbonate with brass contacts
Lamp Requirement	1 x FT-L (T-12) 18/20 Watts (Osram, Philips, or Surya)
Lamp Holder Type	G13 base rotor holder, white polycarbonate/ABS with brass contacts
Battery (they are not included) Type	Rechargeable Sealed Lead Acid (SLA) battery (they are not included)
Recharging Cycle	10 to 12 hours via constant voltage charger
Emergency Backup Duration	180 minutes (3 hours) + 10%
Compliance Standard	IS : 9583 – 1981

Parameter

Specification / Requirement

Mounting Configuration

Surface mounting on wall or ceiling via 2 pre-drilled holes

Enclosure Weight

Approximately 4 kg

Ingress Protection

IP-20 (dry indoor applications)

Electrical Input

~230 Volts AC, 50 Hz

Mains Terminal Block

5 A, 250 Volts, milky white polycarbonate with brass contacts

Lamp Requirement

1 x FT-L (T-12) 18/20 Watts (Osram, Philips, or Surya)

Lamp Holder Type

G13 base rotor holder, white polycarbonate/ABS with brass contacts

Battery (they are not included) Type

Rechargeable Sealed Lead Acid (SLA) battery (they are not included)

Recharging Cycle

10 to 12 hours via constant voltage charger

Emergency Backup Duration

180 minutes (3 hours) + 10%

Compliance Standard

IS : 9583 – 1981

Assembly Component	Material Specification	Maintenance Procedure
Enclosure Body	22 S.W.G. C.R.C.A. sheet steel	Wipe exterior white epoxy polyester powder coating with a dry, lint-free cloth. Verify wall or ceiling mounting stability via the 2 pre-drilled holes.
Internal Reflector	22 S.W.G. C.R.C.A. sheet steel	Clean the white powder-coated surface gently to clear accumulated dust and maximize internal photometric reflection.
Signage Panel	2 mm milky acrylic diffuser	Dust the acrylic panel and CAD-designed vinyl pasted graphics using a mild antistatic cleaning solution. Avoid abrasive pads.
Mains Connector	Polycarbonate / Brass contacts	Inspect the 5 A, 250 V connector block to confirm mechanical retention and electrical integrity.

Assembly Component

Material Specification

Maintenance Procedure

Enclosure Body

22 S.W.G. C.R.C.A. sheet steel

Wipe exterior white epoxy polyester powder coating with a dry, lint-free cloth. Verify wall or ceiling mounting stability via the 2 pre-drilled holes.

Internal Reflector

22 S.W.G. C.R.C.A. sheet steel

Clean the white powder-coated surface gently to clear accumulated dust and maximize internal photometric reflection.

Signage Panel

2 mm milky acrylic diffuser

Dust the acrylic panel and CAD-designed vinyl pasted graphics using a mild antistatic cleaning solution. Avoid abrasive pads.

Mains Connector

Polycarbonate / Brass contacts

Inspect the 5 A, 250 V connector block to confirm mechanical retention and electrical integrity.

Deployment Area	Primary Mounting Method	Operational Benefit	Lamp & Electrical Profile
Hotel Corridors	Wall or Ceiling Surface (2 pre-drilled holes)	Continuous maintained directional guidance for transient occupants	1 x FT-L (T-12) 18/20W, ~230V AC, 50 Hz
Emergency Staircases	Wall or Ceiling Surface	180-minute (+10%) backup run-time via internal SLA battery (they are not included)	1 x FT-L (T-12) 18/20W, G13 Rotor Holder
Underground Parking	Ceiling Surface	High-contrast 2 mm milky acrylic diffuser with vinyl graphics	1 x FT-L (T-12) 18/20W, 5A 250V Connector
Facility Battery Rooms	Wall Surface	Compliant life-safety signage conforming to IS : 9583 – 1981	1 x FT-L (T-12) 18/20W, 22 SWG CRCA Housing

Deployment Area

Primary Mounting Method

Operational Benefit

Lamp & Electrical Profile

Hotel Corridors

Wall or Ceiling Surface (2 pre-drilled holes)

Continuous maintained directional guidance for transient occupants

1 x FT-L (T-12) 18/20W, ~230V AC, 50 Hz

Emergency Staircases

Wall or Ceiling Surface

180-minute (+10%) backup run-time via internal SLA battery (they are not included)

1 x FT-L (T-12) 18/20W, G13 Rotor Holder

Underground Parking

Ceiling Surface

High-contrast 2 mm milky acrylic diffuser with vinyl graphics

1 x FT-L (T-12) 18/20W, 5A 250V Connector

Facility Battery Rooms

Wall Surface

Compliant life-safety signage conforming to IS : 9583 – 1981

1 x FT-L (T-12) 18/20W, 22 SWG CRCA Housing

	Current Product Exit Light Prolite PEL 120 EM	Emergency Light Transparent Body	Emergency Light Customized	+ Add product to compare
SKU	KTI17001002PEXI	KTI17001003LEL1	KTI17001002EMEL	—
Brand	Prolite	Prolite	Prolite	—
Price (excl. GST)	₹ 5,616.00 excl. GST	₹ 3,280.00 excl. GST	₹ 3,915.00 excl. GST	—
GST %	18.00%	18.00%	18.00%	—
Certifications	IS 10322	IS 10322	—	—
Availability	Made to Order	Made to Order	Made to Order	—
				—

Current Product

Exit Light Prolite PEL 120 EM

Emergency Light Transparent Body

Emergency Light Customized

+ Add product to compare

SKU

KTI17001002PEXI

KTI17001003LEL1

KTI17001002EMEL

—

Brand

Prolite

—

Price (excl. GST)

₹ 5,616.00 excl. GST

₹ 3,280.00 excl. GST

₹ 3,915.00 excl. GST

—

GST %

18.00%

—

Certifications

IS 10322

—

Availability

Made to Order

—

Exit Light Prolite PEL 120 EM

Product Description

KTI17001002PEXI

About this product .

Product Information .

Installation and Commissioning Guidelines for Prolite PEL120 E/M

Surface Mounting and Enclosure Preparation

Mains Electrical Termination

Lamp Fitting and Reflector Assembly

Commissioning and Battery (they are not included) Charging

Installation Specifications Overview

Prolite PEL120 E/M Maintenance Guidelines & Service Protocol

Status Indication & Charging Diagnostics

Rechargeable Storage System & Duration Testing

Fluorescent Lamp & G13 Rotor Holder Servicing

Housing, Reflector, and Optical Care

Industrial and Commercial Applications for Prolite PEL 120 EM

Egress Wayfinding in Commercial Hospitality and Hotel Corridors

Emergency Signage for Multi-Level Stairwells and Escape Routes

Life Safety Illumination in Underground Parking Structures

Critical Egress Compliance in Technical Battery Rooms

Related Products .

Compare with similar products .

Product FAQ .

Category FAQ .

Exit Light Prolite PEL 120 EM

Product Description

KTI17001002PEXI

About this product .

Product Information .

Installation and Commissioning Guidelines for Prolite PEL120 E/M

Surface Mounting and Enclosure Preparation

Mains Electrical Termination

Lamp Fitting and Reflector Assembly

Commissioning and Battery (they are not included) Charging

Installation Specifications Overview

Prolite PEL120 E/M Maintenance Guidelines & Service Protocol

Status Indication & Charging Diagnostics

Rechargeable Storage System & Duration Testing

Fluorescent Lamp & G13 Rotor Holder Servicing

Housing, Reflector, and Optical Care

Industrial and Commercial Applications for Prolite PEL 120 EM

Egress Wayfinding in Commercial Hospitality and Hotel Corridors

Emergency Signage for Multi-Level Stairwells and Escape Routes

Life Safety Illumination in Underground Parking Structures

Critical Egress Compliance in Technical Battery Rooms

Related Products .

Compare with similar products .

Product FAQ .

Q. What are the electrical, lamp, and backup specifications of the Prolite PEL 120 EM exit light?

Q. What materials and construction standards are used in the Prolite PEL 120 EM housing and diffuser?

Q. Which fluorescent lamp brands and mounting methods are compatible with the Prolite PEL 120 EM?

Q. What is the HSN classification and compliance standard for the Prolite PEL 120 EM?

Category FAQ .

Q. What is the product Emergency Lights also known as?

Q. What are emergency lights?

Q. Where are emergency lights used?

Q. What are the different types of emergency lights?

Q. How long do emergency lights operate during a power outage?