The Biomax Access10 (also referenced as the N-Access10) is an offline, standalone access control terminal engineered to secure a single door point without requiring network controllers, data wiring, or software management infrastructure. Operating under part reference KTI01001002SS10, the device combines biometric fingerprint capture, 125 kHz proximity reading, and PIN authentication directly on the terminal, interfacing with standard electrical door accessories and power systems.
Electromechanical Door Hardware & Relay Integration
The terminal features a built-in relay output rated for controlling one door. It provides direct switching compatibility with commercial 12V DC locking hardware across various structural door configurations:
- Electromagnetic (EM) Locks: Compatible with standard fail-safe magnetic locks (power-to-lock) commonly used on perimeter, emergency exit, or interior commercial doors.
- Electric Bolt Locks: Directly switches drop-bolt mechanisms for swing or frameless glass doors.
- Electric Door Strikes: Compatible with fail-secure (power-to-open) or fail-safe strike assemblies fitted to standard wooden or metal door frames.
- Lock Output Timing: The internal relay includes a programmable opening delay adjustable from 1 to 255 seconds, allowing field technicians to calibrate hold-open durations precisely according to door type and foot traffic.
Credential & Authentication Mode Compatibility
The Access10 supports up to 500 fingerprint templates, up to 500 RFID proximity cards, and 2 distinct common numeric passwords. System integrators can configure the device into three distinct verification pass modes depending on site security protocols:
- Single-Factor Pass Mode (FP / Card / Code): Accepts verification via any one presented method—fingerprint match (
