Answer:
The ZKTeco FBL700 supports factory integration with RFID card readers and fingerprint access control readers. On-site installation requires a horizontal solid base (50 mm to 100 mm height recommended), 8 sets of M12 expansion anchor bolts, a φ25mm PVC pipe for power and Ethernet cable feeds, and a minimum 100 mm clearance from adjacent walls for lid maintenance access.
The ZKTeco FBL700 is designed for plug-and-play access control integration and standardized civil installation:
- Access Reader Compatibility: Factory-tested and compatible with built-in RFID card readers, biometric fingerprint terminals, or hybrid dual-authentication configurations. Integrated status LED indicators guide user passage.
- Structural Mounting Requirements: Recommended for mounting on a flat, solid foundation raised 50 mm to 100 mm above finished floor level. Secured using 8 sets of M12 expansion bolts, nuts, and washers.
- Conduit and Cabling: Power cabling and Ethernet network lines route directly into the internal wire slot through a φ25mm PVC conduit before bolting down the cabinet base.
- Service Clearances: A minimum maintenance clearance of 100 mm between the turnstile casework and adjacent walls must be maintained to allow full opening of the keyed top lid.
- Grounding: Requires dedicated, reliable earth ground wire connection at system terminal points to ensure operational electrical safety.
.png)