Product Information

Attribute

Value

Operation-Type

Dry Cell Non Rechargeable

Beam Range

Upto 500 Meter

Pelican 2460 Led Flashlight

KTI12005004PELI

Product Description

The Pelican 2460 StealthLite is a rechargeable, high-intensity industrial LED flashlight engineered for hazardous location inspection and emergency response.

Make/Brand: Pelican
Model: 2460 StealthLite
Light Source: 1 Watt LED
Luminous Output: 183 Lumens (ANSI FL1 Standard High)
Beam Distance: 179 meters
Peak Beam Intensity: 8,050 candela
Run Time: 5 hours continuous
Operating Voltage: 4.8 V nominal
Power Source: Requires 4 AA NiMH rechargeable batteries
Charging System: Base unit with 5-hour recharge cycle via facility transformer or 12V vehicle plug-in/direct wire
Enclosure Material: ABS polymer body and shroud in High Visibility Yellow with Polycarbonate (PC) lens and Ethylene Propylene O-ring
Switch Type: One-handed safety toggle switch (On / Off)
Ingress Protection: IPX7 submersible (waterproof to 1 meter depth)
Hazardous Area Certifications: Class I, Division 2; Class II, Division 2 (Class I, Div. 2, Groups ABCD T4)

KTI12005004PELI

Price

₹ 22,017.15 excl. GST

+ 18.00% GST. Freight after pincode at cart.

Registered dealers see net rates after login

Product Details
Available Brands	Pelican
Unit	Numbers
HSN Code	85391000
Weight	0.125 kg
Warranty	12 Months No-Onsite Warranty
Resources	Download Datasheet
Tags/categories	Security LED Searchlights Flameproof searchlight

Usually dispatched within 2 days

About this product .

The Pelican 2460 StealthLite is a rugged, rechargeable handheld industrial flashlight engineered specifically for harsh operating conditions. Built with a high-impact ABS body and shroud in High Visibility Yellow, it features an impact-resistant polycarbonate lens and an ethylene propylene sealing gasket designed to withstand industrial wear and chemical exposure.
Equipped with a collimated 1-watt LED module, the flashlight delivers a bright 183 lumens output with a peak beam intensity of 8,050 candela under ANSI/NEMA FL1 standards. The concentrated optical beam penetrates smoke, fog, and dust up to a distance of 179 meters, providing up to 5 hours of continuous runtime on a single charge.
The system operates on a nominal 4.8V circuit powered by 4 AA NiMH rechargeable batteries. To prevent hydrogen gas accumulation during extended charging cycles, internal catalyst pellets are integrated directly into the lamp assembly for enhanced operational safety.
Recharging is managed through a dedicated dock cradle achieving a full charge cycle in 5 hours. The base unit supports permanent desktop or wall mounting and accommodates facility transformers or 12V vehicle electrical installations. When installed in vehicles, direct wiring must connect to an ignition-switched line to avoid battery drain.
Built for harsh industrial and hazardous environments, the enclosure conforms to IPX7 ingress protection standards, providing waterproof submersible sealing up to 1 meter immersion. It is officially certified for Class I, Division 2 and Class II, Division 2 hazardous locations (Groups ABCD T4).
Operation is controlled via a one-handed safety switch with positive On and Off positions, allowing easy actuation even when wearing heavy industrial protective gloves. Measuring 17.8 cm in overall length, it provides an ergonomic, balanced grip for security inspection, plant maintenance, and emergency response teams.
When inserting replacement 4 AA NiMH batteries, ensure correct polarity following the engraved body diagram (two positive ends up and two down). If the flashlight will remain unused for extended periods, remove all batteries to prevent potential cell leakage and contact corrosion.

Product Information .

Worship Places Industries, Factories Hospitals, Clinics Shopping Malls, Showrooms Public Roads Police Station Defense Sectors Emergency Services

Pelican 2460 StealthLite Power Systems and Accessory Compatibility

Power Supply and NiMH Battery Pack Interfacing

The Pelican 2460 StealthLite handheld LED flashlight (KT SKU: KTI12005004PELI) operates on an internal 4.8-volt DC architecture designed for dedicated rechargeable chemistry. Power delivery requires a 4-cell AA-size NiMH rechargeable battery pack (they are not included), cross-compatible with official Pelican replacement part number 2469P. The internal tray configuration enforces a dual in-line alignment: two AA NiMH batteries (they are not included) must be inserted with positive terminals facing upward, and two AA NiMH batteries (they are not included) positioned with positive terminals facing downward, matching the engraved polarity diagrams molded directly into the ABS body.

To safely manage chemical emissions during cyclic charging and discharging, the 2460 lamp module integrates internal catalyst pellets engineered specifically to absorb excess hydrogen gas generated by secondary NiMH cells (they are not included). For seasonal shutdowns or prolonged storage, technicians must remove all individual batteries (they are not included) from the ABS housing to eliminate the potential for electrolytic leakage and internal phosphor bronze contact spring corrosion.

Charging Cradles and Facility Electrical Infrastructure

Recharging is conducted via a dedicated drop-in charging dock that achieves a full charge cycle within 5 hours. The base assembly supports versatile stationary mounting on workbenches, control consoles, or equipment bulkheads utilizing pre-applied industrial double-sided adhesive tape or two #8 mechanical screws (screws are not included). Facility power interfacing is supported through certified mains transformers and vehicular DC adapters:

Pelican 2468H 220V Transformer: Facilitates connection to industrial 220V AC mains supplies via standard transformer leads for stationary plant, workshop, or control room charging stations.
Pelican 8056F 12V Plug-in Fast Charger: Enables rapid auxiliary connection directly into standard 12V DC vehicular auxiliary sockets for mobile inspection units and maintenance vans.
Pelican 6061F Direct Wiring Rig for Fast Charger: Engineered for hardwired fleet installation into emergency response, utility, and patrol vehicles. The harness must be integrated directly with an ignition-switched circuit rather than continuous vehicle battery leads to mitigate parasitic drainage.

PPE Integration and Field Mounting Hardware

Measuring 7.00 inches (17.8 cm) in length with an operational weight of 7.8 oz (221 g) when loaded with batteries (they are not included), the Pelican 2460 StealthLite is dimensionally matched for hand carriage or structural gear integration. The body profile integrates seamlessly with the Pelican 0770 Helmet Light Holder accessory, enabling hands-free illumination across industrial hard hats, firefighter headgear, and tactical safety helmets during petrochemical turnaround, confined space entry, or hazardous site inspection.

Compatibility and Accessory Reference

Component / Accessory	Part Number	System Interface / Compatibility
Rechargeable Battery Pack	2469P	4-Cell AA NiMH pack, 4.8V DC nominal (they are not included)
Helmet Mount Bracket	0770	Industrial hard hats, rescue helmets, structural PPE
Direct Wiring Vehicle Rig	6061F	12V DC vehicle electrical systems (ignition-switched tie-in)
Auxiliary Fast Charger	8056F	12V DC vehicle auxiliary power ports
Mains Power Supply	2468H	220V AC facility mains electrical supplies

Charger Base Mounting, Vehicle Wiring, and Battery Installation

Charger Base Surface and Wall Mounting

The Pelican 2460 StealthLite charging base station is engineered for fixed installation across industrial workbenches, equipment consoles, electrical panels, or facility walls. Mounting the dock securely prevents dislodgement in high-vibration industrial environments. Installers can fix the cradle using double-sided mounting tape or mechanically fasten the unit to solid vertical or horizontal surfaces using two #8 screws (screws are not included). When selecting a mounting location, maintain adequate clearance above the cradle so field personnel can smoothly insert and release the 7.00-inch (17.8 cm) high visibility yellow ABS flashlight assembly without obstruction.

Facility AC Mains Power Connection

For industrial control rooms, workshops, and inspection staging posts, the charging dock interfaces with external stepped-down power inputs. Stationary deployments utilize plug-in mains adapters, including compatible 220V transformer configurations (Pelican 2468H) or standard facility mains power transformers. Verify that input power cables are dressed neatly through strain relief pathways to avoid tension on the terminal connection. The charger cradle terminal contacts interface with the external contact points of the flashlight, delivering regulated power to replenish the internal 4.8V DC circuit within a rated 5-hour cycle.

Vehicle and Fleet 12V Direct Wiring Procedures

For deployment inside emergency response apparatus, utility maintenance trucks, and industrial fleet vehicles, the charger base supports direct 12V vehicle power integration via an accessory direct wiring rig (Pelican 6061F) or a 12V auxiliary plug-in adapter (Pelican 8056F). Professional installers must observe the following electrical integration rules:

Ignition-Switched Line Connection: When hardwiring the charging dock via the 6061F direct wiring rig, the positive lead must be connected to an ignition-switched power circuit rather than directly to the unswitched vehicle battery. Because the fast-charge cradle draws high amperage during active cycles, direct connection to an unswitched circuit can cause parasitic drain on the vehicle battery during extended downtime.
Polarity and Fuse Protection: Ensure circuit polarity matches vehicle chassis earth requirements and that the supply lead is protected by appropriate in-line circuit protection to guard against electrical spikes.
Cable Routing: Fasten wiring away from sharp bulkhead edges, engine heat corridors, and steering linkages using industrial-grade wire ties.

NiMH Cell Pack Installation and Contact Alignment

The Pelican 2460 operates on a 4-cell AA NiMH pack configuration (Pelican 2469P replacement pack). Note that batteries (they are not included) are not supplied in the standard package and must be sourced separately. Prior to loading batteries (they are not included), verify the safety switch is in the discrete Off position.

Unthread the chemical-resistant ABS front shroud assembly counterclockwise from the body housing.
Inspect the internal Ethylene Propylene rubber O-ring sealing gasket for proper seated position, cleanliness, and absence of foreign grit to maintain IPX7 submersible ingress protection.
Check that the internal catalyst pellets on the lamp module are seated properly; these are vital for absorbing residual hydrogen gas released during NiMH cell charging.
Insert 4 AA NiMH batteries (they are not included) strictly observing the engraved polarity diagrams on the flashlight body: position 2 batteries (they are not included) in-line with the positive (+) terminal facing upward toward the lamp assembly, and 2 batteries (they are not included) in-line with the positive (+) terminal facing downward toward the base.
Confirm engagement with the stainless steel and phosphor bronze contact spring retainers.
Thread the shroud back onto the body firmly until fully seated against the O-ring stop.

Commissioning and Charging Diagnostic States

Before putting the Pelican 2460 into service in Class I, Division 2, Groups ABCD T4 or Class II, Division 2 hazardous environments, the manufacturer specifies an initial continuous charge cycle of 24 hours or more to properly condition new NiMH batteries (they are not included). Seat the flashlight firmly into the charging cradle until the mechanical retention latch clicks into locked position. Observe the cradle LED indicator to confirm operation:

LED Indicator Status	System Diagnostic State	Action Required
Solid Green (Empty Base)	Cradle powered in standby mode	System ready for flashlight insertion
Pulsing Red	Active charging cycle in progress	Allow 5-hour charging cycle to complete
Solid Green (Docked)	Full charge achieved / float maintenance	StealthLite ready for continuous deployment

Maintenance, Cell Servicing, and Inspection Protocols

Routine preventative maintenance for the Pelican 2460 StealthLite LED flashlight preserves intrinsic safety compliance, IPX7 submersible waterproof integrity, and dependable optical performance across hazardous industrial environments. Maintenance crews should follow strict servicing procedures for cell management, O-ring preservation, and electrical contact hygiene.

Initial Cell Conditioning and Charging Cycle Diagnostics

Before deploying the Pelican 2460 handheld flashlight into field service, the 4-cell AA NiMH rechargeable battery pack (they are not included) requires conditioning. The manufacturer specifies an initial continuous charge cycle of at least 24 hours to balance the pack and ensure maximum service life. Standard subsequent recharge cycles from a depleted state require approximately 5 hours using the dedicated charger base.

Charger operation can be monitored via the integrated diagnostic LED indicator:

Solid Green: Indicates operational standby power when empty, or confirms a fully charged pack when the flashlight is docked.
Pulsing Red: Confirms active charging mode while the flashlight is locked securely into the charging cradle.
Vehicle Power Circuits: Ensure that vehicle-mounted direct wiring rigs (model 6061F) are wired strictly to an ignition-switched power circuit rather than directly to unswitched vehicle battery lines, preventing parasitic current draw during engine downtime.

Cell Replacement and Polarity Alignment

The flashlight operates at 4.8V DC nominal power using 4 AA NiMH rechargeable batteries (they are not included), matching replacement part number 2469P. When replacing depleted cells (they are not included), technicians must follow the alignment markings engraved directly into the High Visibility Yellow ABS body housing:

Insert 2 cells (they are not included) in-line with the positive (+) terminal facing upward toward the lamp shroud.
Insert 2 cells (they are not included) in-line with the positive (+) terminal facing downward away from the lamp shroud.
Incorrect cell orientation prevents circuit contact and can cause damage to internal contact spring retainers.

Hydrogen Gas Mitigation and Catalyst Pellets

Rechargeable NiMH cells (they are not included) can release minute quantities of hydrogen gas during heavy cycling and high-current fast charging. The Pelican 2460 LED module incorporates internal catalyst pellets located directly on the lamp assembly. These pellets are engineered to absorb and chemically neutralize off-gassed hydrogen within the hermetically sealed ABS body. During any interior servicing or shroud removal, inspect the lamp assembly to ensure the catalyst pellet mount is intact, unobstructed, and free of moisture or chemical contamination.

Sealing Gasket and Enclosure Upkeep

Submersible IPX7 protection (1 meter depth) depends entirely on the condition of the Ethylene Propylene O-ring gasket seated between the ABS shroud and the body:

Component	Material	Maintenance Action
Sealing O-Ring	Ethylene Propylene	Inspect for cuts, flattening, or particulate contamination; seat evenly in groove before tightening shroud.
Lens Element	Polycarbonate (PC)	Wipe clean with a non-abrasive, mild industrial cleaning solution; inspect for impact fissures.
Body & Shroud	ABS Polymer	Inspect for severe chemical degradation, gouges, or cracks that compromise sealed integrity.
Contact Springs	Stainless Steel / Phosphor Bronze	Clean terminal ends periodically with an electrical contact cleaner to prevent resistance buildup.

Storage and Long-Term Decommissioning

If the Pelican 2460 flashlight is taken out of operational rotation for extended periods, technicians must remove all AA NiMH batteries (they are not included) from the ABS body. Removing the cells (they are not included) prevents potential chemical leakage, corrosion of the stainless steel and phosphor bronze spring contacts, and degradation of internal electrical conductors.

Industrial Applications and Operational Deployment Scenarios

Petrochemical Refineries and Hazardous Plant Inspection

The Pelican 2460 StealthLite LED flashlight is engineered specifically for deployment across classified industrial processing areas. Holding Class I, Division 2 (Groups ABCD T4) and Class II, Division 2 certifications, this lighting instrument is approved for facilities where ignitable concentrations of flammable gases, vapours, or combustible dusts may be present under abnormal operating conditions. Field technicians, process engineers, and maintenance personnel routinely deploy the unit during routine rounds, structural integrity surveys, and perimeter checks in oil refineries, chemical processing units, and offshore hydrocarbon extraction platforms.

Its 1-watt LED light engine produces 183 lumens of ANSI/NEMA FL1 compliant illumination, driving a concentrated beam reaching 179 meters with a peak beam intensity of 8,050 candela. This tight, penetrating beam pattern allows inspectors to cut through industrial atmospheres to scrutinize pipe racks, elevated valve manifolds, storage tanks, and distillation columns from ground level without losing clarity or optical focus.

Marine Operations and Harsh Weather Maintenance

With an IPX7 ingress protection rating, the Pelican 2460 enclosure provides certified submersible integrity up to a depth of 1 meter. This makes the flashlight an essential illumination tool for marine response crews, coastal port operations, dockyard facilities, and shipboard work. The Ethylene Propylene O-ring seal completely blocks moisture and driving rain, while internal electrical contacts fabricated from phosphor bronze and stainless steel resist galvanic corrosion in saline, humid maritime environments.

The rugged housing and shroud are molded from chemical-resistant ABS polymer, protecting the unit against mechanical impacts and exposure to industrial fluids. Finished in High Visibility Yellow, the unit remains distinctly locatable in low-light ship compartments, wet weather, or cluttered industrial utility spaces. The oversized one-handed safety switch provides definite On/Off positive switching, allowing flawless operation even when technicians wear wet marine gloves or heavy nitrile protective gauntlets.

Mobile Fleet and Utility Service Operations

Utility service trucks, electrical infrastructure crews, and emergency fleet vehicles utilize the Pelican 2460 as a primary vehicle-mounted searchlight. The system integrates into fleet cabs and work bodies using the fast charger base unit, which can be permanently wired to vehicle electrical supplies via the optional 6061F direct wiring rig or plugged into auxiliary power ports using the 8056F 12V adapter. Connecting the charging rig directly to an ignition-switched power line ensures continuous fleet readiness while preventing parasitic drain on the vehicle's primary battery system.

With a continuous high-mode runtime of 5 hours and a 5-hour charging cycle, the Pelican 2460 delivers reliable duty-cycle coverage across full shifts. Measuring an overall physical length of 7.00 inches (17.8 cm) and weighing just 7.8 oz (221 g) when loaded with four AA NiMH batteries (they are not included), the flashlight fits cleanly into service vehicle bulkheads, toolboxes, and crew utility pouches.

Confined Space Entry and Industrial Infrastructure Maintenance

Plant turnaround operations, subterranean vaults, vessel cleaning, and utility tunnel work require robust, dependable task lighting. The impact-resistant polycarbonate lens withstands accidental collisions against structural steel and concrete surfaces during tight maintenance maneuvers. In confined workspaces, internal catalyst pellets mounted on the lamp module continuously absorb hydrogen gas emitted by the four AA-size NiMH rechargeable batteries (they are not included), adding an essential safeguard inside sealed compartments.

For tasks requiring unhindered hand mobility, the Pelican 2460 can be mounted directly to industrial hard hats using the compatible 0770 Helmet Light Holder accessory, directing the 8,050-candela beam precisely along the user’s sightline.

Target Application Deployment Matrix

Operational Environment	Key Environmental Hazards	Pelican 2460 Operational Feature	Relevant Certification / Standard
Petrochemical Refineries	Hydrocarbon vapours, flammable gases	ABS housing, spark-contained one-handed safety switch	Class I, Div. 2, Groups ABCD T4
Grain Elevators & Silos	Combustible airborne dust	Sealed switch and Ethylene Propylene O-ring gasket	Class II, Div. 2
Marine & Offshore Decks	Heavy spray, salt corrosion, water immersion	Phosphor bronze/stainless contacts, IPX7 submersion	IPX7 (1-meter submersion)
Mobile Service Fleet	Vibration, shift work, continuous recharge needs	Direct-wire charger base, 5-hour runtime	ANSI/NEMA FL1 High Spec

Related Products .

Page 1 of 3

Syncing...

Compare with similar products .

	Current Product Pelican 2460 Led Flashlight	Flameproof Tourch Model FCG7301	Flash Light Ultralite SF7	+ Add product to compare
SKU	KTI12005004PELI	KTI120050F7301	KTI12005006USF7	—
Brand	Pelican	KTI	Ultralite	—
Price (excl. GST)	₹ 22,017.15 excl. GST	Ask for price	₹ 4,725.00 excl. GST	—
GST %	18.00%		18.00%	—
Certifications	—	—	—	—
Availability	Made to Order	Made to Order	Made to Order	—
		Ask for price		—