Answer:
The NBG-12LX interfaces with all Notifier intelligent control panels operating on FlashScan (up to 159 stations per loop) or CLIP (up to 99 stations per loop), excluding FireWarden series and NSP-25 panels. It mounts semi-flush to single-gang, double-gang, or 4-inch square boxes (using the BG12TR trim ring), or surface mounts to SB-10 metal or SB-I/O plastic backboxes.
The NBG-12LX manual pull station connects over a 2-wire Signaling Line Circuit (SLC) loop and is engineered specifically for intelligent Notifier fire alarm control panels:
- Control Panel Compatibility: Compatible with all Notifier intelligent panels supporting FlashScan or CLIP protocols. It is explicitly not compatible with Notifier FireWarden series panels or the NSP-25 panel.
- Loop Capacities: Supports up to 159 NBG-12LX stations per loop on FlashScan protocol, and up to 99 stations per loop on CLIP protocol. Address selection is set via two integrated rotary decimal switches (1–159 for FlashScan; 1–99 for CLIP).
- Mounting Hardware: Suitable for semi-flush mounting into standard single-gang, double-gang, or 4-inch (10.16 cm) square electrical boxes. When semi-flush mounting to a double-gang or 4-inch box, the optional BG12TR trim ring is required. For surface mounting, it requires the model SB-10 (metal) or model SB-I/O (plastic) surface backbox.
- Replacement Parts: Compatible with key set model 17021 (set of two replacement keys) and NY-Plate (New York City trim plate).
.jpg)