The Notifier NBG-12LX addressable manual pull station is engineered for manual fire alarm initiation across indoor commercial, institutional, and light industrial facilities. Connected over a 2-wire Signaling Line Circuit (SLC) to compatible Notifier intelligent fire alarm control panels, the station delivers distinct point identification, dual-action nuisance prevention, and seamless system monitoring.
High-Traffic Commercial and Institutional Facilities
In public corridors, commercial office complexes, retail centers, and educational facilities, accidental tripping of fire alarms disrupts operations and incurs costly false alarm penalties. The NBG-12LX mitigates accidental or malicious activation through a dual-action mechanism requiring the operator to push the handle inward before pulling down to latch the mechanism.
- Accessible Public Spaces: Complies with ADAAG Section 4.1.3[13] and ADA specifications, operating under a 5 lb. maximum activation force threshold.
- Universal Visibility: High-visibility red polycarbonate housing features bold white "FIRE" lettering measuring at least 1.00 inch (2.54 cm) alongside integrated Braille lettering on the handle to assist visually impaired occupants.
- Positive Activation Confirmation: When pulled, the handle latches mechanically, exposing the word "ACTIVATED" in bright yellow text at the top and protruding at the base for immediate visual identification along corridors.
Intelligent Notifier SLC Loop Deployments (FlashScan & CLIP)
The NBG-12LX serves as a dedicated manual initiation node on intelligent Notifier loops, operating at a nominal 24 VDC (up to 28.0 VDC maximum SLC voltage) with low power draw (375 µA standby current, 5 mA alarm current). It integrates into large-scale building management architectures using rotary decimal switches to assign device addresses without requiring specialized programming software.
- High-Capacity FlashScan Networks: Accommodates up to 159 stations per SLC loop when connected to Notifier FlashScan protocol panels (such as NFS2-640 and NFS2-3030 systems), supporting address configurations from 1 to 159.
- Legacy CLIP Protocol Loops: Supports backward compatibility on Notifier Classic Loop Interface Protocol (CLIP) systems, allowing address configuration from 1 to 99 for existing panel modernization projects.
- Visual Polling Status: An integral bicolor status LED shines through the station handle, blinking green during normal loop polling cycles on FlashScan systems and latching steady red when an alarm condition is initiated.
Dry Industrial Plants, Warehouses, and Utility Structures
Within indoor utility spaces, manufacturing sub-areas, and distribution centers operating within dry environmental thresholds—temperatures from 32°F to 120°F (0°C to 49°C) and relative humidity between 10% and 93% noncondensing—the durable textured polycarbonate shell resists typical indoor industrial wear.
- Surface-Mounted Conduit Environments: In utility rooms lacking recessed junction boxes, the station surface mounts directly using the metal SB-10 backbox or the plastic SB-I/O backbox.
- Semi-Flush Electrical Infrastructure: Compatible with standard single-gang, double-gang, or 4-inch (10.16 cm) square electrical boxes. When mounting to double-gang or 4-inch square boxes, the station integrates cleanly using the optional BG12TR trim ring.
- Direct Field Terminations: Heavy-gauge captive screw terminals accept loop wiring up to 12 AWG (3.25 mm²), ensuring reliable terminations inside high-density electrical riser configurations.
Regulated Periodic Testing and Fire Safety Audits
Facility maintenance teams and life safety contractors benefit from the NBG-12LX key-locking design during routine code compliance testing. Personnel can unlock and open the door assembly to inspect the station interior or adjust the two rotary decimal address switches without triggering an alarm condition at the control panel. After a genuine alarm or test actuation, inserting the key and opening the door releases the mechanical handle latch; closing the door automatically resets the internal microswitch, restoring normal supervisory operation.
.jpg)