Answer:
The GST DI-9204E connects to GST intelligent addressable panels, including the GST200N and GST-IFP4E, via non-polarized two-wire loop terminals (Z1, Z2). Device addressing across the 1 to 242 range is programmed using the GST P-9910B handheld programmer.
The GST DI-9204E integrates seamlessly into GST intelligent addressable fire detection loops:
- Panel Compatibility: Directly compatible with GST intelligent addressable fire alarm control panels, including the GST200N, GST-IFP4E, and DI-9000E series control systems.
- Non-Polarized Loop Wiring: Connects to the detection loop via terminals Z1 and Z2 without polarity restrictions, substantially reducing field installation wiring errors. GST recommends fire-resistant two-core cabling with a cross-section of 1.0 mm² or greater (minimum 0.5 mm² subject to local fire codes).
- Electronic Addressing: Addresses are assigned within an electronic range of 1 to 242 using the portable GST P-9910B handheld programmer, avoiding DIP-switch or rotary-dial wear and degradation.
- Mounting & Enclosure Options: Accommodates standard conduit-embedded back boxes or surface mounting via the supplied base. For high-traffic or damp areas, it accepts the optional D-92FC hinged transparent flip cover and the D-92WPB weatherproof back box.
