Answer:
The DXc1 (part number 714-001-111) is a single-loop addressable panel featuring a 500 mA loop driver, an integrated 24V DC 2A power supply operating on 110/230V AC ±15%, two supervised 1A sounder circuits, and a 24V DC 250 mA auxiliary output. The enclosure measures 260 x 390 x 147 mm, weighs 4 kg excluding batteries (they are not included), provides IP30 protection, and houses 2 x 7Ah standby batteries (they are not included).
The Honeywell Morley-IAS DXc1 (Part Number: 714-001-111, KT Ref: KTI07001001DXC1) is an analogue addressable fire alarm control panel engineered for small to medium commercial and industrial applications. It is configured with the following factory-certified electrical, loop, and mechanical specifications:
- Loop Driver Capacity: 1 analogue addressable loop with an available loop current rating of 500 mA.
- Display & Controls: 6 x 40 character (240 x 64 pixels) blue liquid crystal backlit display, 12-button alphanumeric programming keypad, 4 navigation keys, Evacuate, Silence/Resound, Mute Buzzer, Extend Delay, System Reset, Show Alarm Zones, and 2 programmable function keys with status LEDs.
- Power Supply Unit (PSU): Integrated switch-mode power supply rated at 24V DC 2A, operating from an AC input of 110V AC or 230V AC ±15% at 50/60 Hz.
- Auxiliary DC Power Output: +24V DC 250 mA fused output for auxiliary fire safety equipment.
- Monitored Sounder Circuits: 2 independent supervised sounder circuits rated at 1A per circuit.
- Output Relays: 3 single-pole changeover form-C relays rated at 24V DC 1A each (Fire Relay, Extended Relay, and Aux Relay).
- Monitored Inputs: 2 onboard monitored inputs for external supervisory contacts.
- Dimensions & Enclosure: 260 mm (H) x 390 mm (W) x 147 mm (D). Construction features a mild steel sheet rear enclosure with an ABS plastic front cover certified to BS EN60950. Colour finish is RAL 9002 (Grey white). Ingress rating is IP30 (EN6059).
- Weight: 4 kg net weight, excluding internal batteries (they are not included).
- Conduit Knockouts & Mounting: 3 wall-mounting holes; 25 pre-cut 20 mm top knockouts and 2 bottom knockouts.
- Standby Battery Enclosure: Designed to accommodate 2 x 12V 7Ah sealed lead-acid (SLA) stand-by batteries (they are not included), providing up to 24 hours standalone standby or 48 hours when a network card or repeater is active.
- Operating Environment: Rated for operation from 0°C to +40°C with 5% to 95% relative humidity (non-condensing).
