The CAME BK-BKE 2200 electromechanical gearmotor is engineered specifically to automate high-mass sliding and multi-leaf telescopic gates at demanding vehicular access points. Built with a 230 V AC (50/60 Hz) single-phase motor delivering 580 W of power and a nominal traction force of 1500 N, the operator is rated to move gate leaf structures weighing up to 2200 kg. Its mechanical architecture, featuring a module 6 (M6) drive pinion and an IP44-rated cast aluminium enclosure, serves applications where structural inertia, frequent cycling, and site security require positive drive control and high physical endurance.
Industrial Manufacturing Plants and Logistics Hubs
Freight terminals, intermodal distribution yards, and heavy manufacturing sites frequently utilise wide-span sliding barriers constructed from heavy-gauge structural steel or solid infill panels. The BK-BKE 2200 delivers the requisite 1500 N thrust force to reliably overcome static rolling resistance and move gate assemblies up to 2200 kg at operating speeds of up to 10.5 meters per minute.
The non-reversible electromechanical gear design maintains mechanical gate holding when stationary, mitigating perimeter breach risks. In the event of primary power failure, the integrated key-operated manual release hatch permits facility security staff to disconnect the transmission and manoeuvre large vehicular gates manually without dismounting mechanical assemblies.
Telescopic Multi-Leaf Sliding Gate Systems
On properties where boundary perimeter runoff is limited, telescopic sliding configurations split the entrance barrier into multiple synchronised leaves. The CAME BK-BKE 2200 is engineered to automate telescopic gate systems up to 2200 kg of aggregate moving mass.
Driving through heavy 30 x 30 mm module 6 (M6) galvanised steel gear racks, the gearmotor maintains uniform mesh contact across the drive sequence. Mechanical limit switch assemblies define positive end-of-travel thresholds, ensuring reliable positioning across continuous opening and closing sequences without over-travelling the track boundaries.
Commercial Perimeters and Condominium Complexes
Large-scale residential developments, corporate business parks, and mixed-use commercial compounds require automated vehicular access solutions capable of handling sustained entry cycles and integrating multi-device safety arrays. The BK-BKE 2200 pairs with built-in CAME ZBKN / ZBKE series electronic control cards to manage high-throughput vehicle lanes.
These commercial applications deploy the operator alongside external infrared photocell pairs, 8.2 kΩ resistive sensitive safety edges, and flashing movement indicators to comply with moving machinery safety standards. Multi-user access control is enabled by inserting CAME AF plug-in radio receiver cards directly into the control board, accommodating fleets of rolling-code or fixed-code wireless transmitters.
Application Suitability Matrix
| Site Application |
Typical Gate Configuration |
Operational Demands |
BK-BKE 2200 Technical Feature Match |
| Logistics Parks & Freight Depots |
Single-leaf cantilever or tracked sliding gates |
Heavy leaf mass, continuous freight traffic, weather exposure |
2200 kg weight rating, 1500 N traction force, IP44 protection, -20 °C to +55 °C range |
| Space-Constrained Industrial Entrances |
Multi-leaf telescopic sliding gates |
High drive inertia, multi-panel transmission, restricted run-back |
Module 6 (M6) pinion drive, mechanical limit switches, 10.5 m/min speed |
| Commercial Facilities & Condominiums |
Tracked sliding vehicle security gates |
High cycle count, peripheral safety compliance, multi-user automation |
ZBKN/ZBKE board integration, 8.2 kΩ edge inputs, AF radio receiver card compatibility |