Gate Architecture and Mechanical Capacity
The CAME BK-BKE 2200 electromechanical gearmotor is engineered specifically to interface with heavy-duty perimeter installations. It is fully compatible with standard ground-track sliding gates as well as multi-leaf telescopic gate configurations. Mechanical sizing dictates that the cumulative gate leaf weight must not exceed the unit's maximum structural threshold of 2200 kg. Delivering a nominal thrust of 1500 N at an operating speed of 10.5 meters per minute, the gearmotor is adapted for high-inertia industrial and commercial vehicular entrances.
Gear Drive and Toothed Rack Compatibility
Mechanical power transmission requires direct interface with a compatible toothed drive rack. The BK-BKE 2200 is manufactured with an integrated Module 6 (M6) output pinion gear. It is fully compatible with:
- CAME 009CGZ6 Gear Rack: Heavy-gauge 30 x 30 mm Module 6 (M6) laminated galvanised steel rack sections engineered specifically for the BK2200 and BKE2200 automated units.
- Pitch Specification: Standard M6 tooth pitch profiles matched to prevent pitch mismatch, premature tooth wear, or gear binding under high-load cycling.
- Mounting Geometry: Welded or bolted rack attachments aligned to maintain an operational clearance of 1 to 2 mm between the rack teeth and pinion root, preventing gate mass from loading directly onto the motor shaft.
Electronic Control Units and RF Receivers
The operator's internal cast aluminium housing and ABS protective enclosure accommodate compatible CAME ZBK series control electronics, specifically designed for 230 V single-phase industrial operators:
- CAME ZBKN / ZBKE Control Boards: Built-in multi-function control boards providing terminal connections for power input, mechanical limit switches, and optional magnetic limit switches for open/closed position calibration.
- CAME AF Radio Receiver Cards: Direct-insertion slot on the control board compatible with CAME AF plug-in receiver modules, supporting rolling-code decoding and fixed-code (Twin / Key Code) multi-user transmitter integration. Transmitters requiring external cells or batteries (they are not included) communicate directly through the AF module.
Safety Hardware and Peripheral Interfacing
The internal control circuitry incorporates dedicated quick-fuse protection (8 A line fuse, 1 A accessory fuse) and multiple terminal connection points for site safety and signalling devices:
- Safety Photocells: Direct interface for through-beam infrared safety photocell pairs configured for reversing during gate closing phases.
- Sensitive Safety Edges: Onboard safety terminals configured to monitor standard resistive 8.2 kΩ sensitive edges along the leading or trailing gate profiles.
- Optical Signalling: Dedicated output terminals for 230 V AC flashing beacons and movement indicator lamps.
- Manual Release: Features an integrated key-operated manual release hatch that disengages the non-reversible electromechanical drive during power failure conditions.
Electrical Infrastructure Compatibility
Site electrical supply must supply single-phase 230 V AC power at 50/60 Hz. The drive absorbs 5.1 A of electrical current with a 580 W motor consumption rating. The unit is rated IP44 against dust and water ingress and operates within an environmental temperature range of -20 °C to +55 °C.
System Compatibility Matrix
| System Element | Specification / Compatible Component | Interfacing Requirement |
|---|---|---|
| Gate Type | Industrial Sliding or Telescopic Leaf | Maximum leaf weight: 2200 kg |
| Drive Rack | CAME 009CGZ6 (30 x 30 mm, M6 galvanised steel) | Requires 1 to 2 mm tooth root clearance |
| Control Unit | CAME ZBKN / ZBKE series internal boards | Integrated inside ABS enclosure |
| Radio Modules | CAME AF series plug-in radio cards | Rolling code and Key Code (Twin) decoding |
| Safety Monitoring | 8.2 kΩ resistive edges & optical photocells | Standard low-voltage safety loop terminals |
| Limit Switches | Mechanical limit switches (magnetic optional) | Track-mounted mechanical / magnetic strike brackets |
| Mains Power | 230 V AC, 50/60 Hz single phase | 580 W rated load, 5.1 A absorbed current |