The ZKTeco FBL200 Single Lane Flap Barrier Turnstile is engineered to interface directly with diverse physical access control technologies, third-party security management platforms, life-safety systems, and electrical infrastructure. Its modular architecture and standardized input/output interfaces streamline integration across commercial, institutional, and industrial facilities.
Access Control Reader & Credential Interfacing
The FBL200 supports integration across multiple identification and credential reading modalities. The onboard controller accepts standard dry contact relay opening signals as well as 12V level signals with a trigger pulse width greater than 100ms. Standard supported reader integrations include:
- Biometric Terminals: Fingerprint biometric readers for secure identity verification.
- RFID & Smart Card Readers: Contactless IC and ID proximity card readers.
- Optical Scanners: 1D and 2D barcode and QR code scanning modules for visitor management and ticketing.
- Serial Communication: RS232 communication interface for direct controller command messaging and status polling.
Emergency System & Fire Alarm Integration
Life safety and emergency evacuation protocols are integrated into the FBL200 control architecture. The controller features a dedicated interface for fire-fighting signals:
- Fire-Fighting Signal Mode: Automatically triggers barrier retraction upon receiving an active fire alarm trigger, providing an unobstructed passage route.
- Emergency Mode: Retracts the acrylic wings fully into the SUS304 stainless steel casework during emergency triggers.
- Power Failure Operation: If main power is interrupted, the barriers retract automatically when an optional backup battery (they are not included) is installed.
Electrical Infrastructure & Control Board Interfacing
The FBL200 turnstile integrates with standard global mains electrical power networks and provides internal drive power management:
- Line Voltage: Compatible with AC 100V–120V and AC 200V–240V supply networks operating at 50/60Hz.
- Motor Driving: Internal mechanism operates via a 24V DC, 40W drive motor.
- Onboard LCD Configuration: Features an integrated LCD screen directly on the flap barrier control board, enabling technicians to configure passage timeouts, anti-pinch thresholds, and signal input parameters without external programming consoles.
Physical Footprint & Environmental Operating Envelope
When planning multi-lane or single-lane entry configurations, the mechanical dimensions and environmental operating ratings must match the site layout:
| Parameter | Specification / Compatibility Rating |
|---|---|
| Unit Footprint (L x W x H) | 1200 mm x 300 mm x 980 mm |
| Passage Lane Width | 570 mm |
| Operating Temperature Range | -28°C to 60°C |
| Operating Humidity Range | 5% to 80% (non-condensing) |
| Installation Environment | Indoor or sheltered outdoor locations |
| Security Classification | Medium Security Level |
| Barrier Movement Mechanism | Retracting acrylic wings (0.8s opening time) |
The integrated infrared and mechanical dual anti-pinch sensors protect users during resets, while directional LED indicators provide clear visual passage status compatible with standard pedestrian traffic management workflows.
