Hikvision DS K1T607TEF access terminal with 7 inch LCD screen and top thermal temperature sensor

Hikvision DS K1T607TEF Multi Biometric Access Control Terminal

KTI01002003TMDS

Product Description

The Hikvision DS-K1T607TEF is an advanced wall-mounted multi-biometric access control and time attendance terminal integrated with rapid non-contact skin-surface temperature screening and mask detection algorithms.

Make: Hikvision
Model: DS-K1T607TEF
Display: 7-inch LCD touch screen (1024 x 600 resolution, 16:9 ratio)
Optical Camera: 2 MP dual-lens camera with Wide Dynamic Range (WDR) and IR supplement light
Thermal Sensor: Vanadium Oxide (VOx) uncooled sensor (120 x 160 resolution, 25 fps)
Temperature Range & Accuracy: 30 °C to 45 °C (86 °F to 113 °F), ±0.5 °C accuracy without black body calibration
Biometrics & Capacities: 50,000 face templates, 5,000 fingerprints, 50,000 EM (125 kHz) cards, 100,000 event log capacity
Face Recognition Speed & Distance:
Operating System: Embedded Linux
Connectivity & Interfaces: TCP/IP, RS-485, Wiegand output/input, tamper-proof switch
Attendance Statuses: 6 statuses (Check In, Check Out, Break In, Break Out, Overtime In, Overtime Out)
Power Requirement: 12 VDC, 2 A

KTI01002003TMDS

Ask for price

Product Details
Available Brands	Hikvision
Unit	Numbers
HSN Code	85437099
Warranty	12 Months No-Onsite Warranty
Tags/categories	Automation Access Control, Attendance System Access Control Access Control With Memory Attendance System Face, Finger, Card, Password Based

Usually dispatched within 2 days

About this product .

The Hikvision DS-K1T607TEF is an enterprise-grade multi-biometric terminal engineered for high-throughput access points requiring automated contactless authentication and preliminary thermal health screening. Housed in a wall-mounted enclosure with integrated tamper detection and hardware watchdog circuitry, the device ensures long-term operational reliability at critical indoor entrances.
Equipped with a 7-inch LCD capacitive touch screen operating at 1024 x 600 resolution, the terminal provides intuitive interaction for users and administrators. The optical biometric system uses a 2 MP dual-lens camera with integrated Wide Dynamic Range (WDR) and an infrared supplement light, enabling facial recognition under severe backlighting or near-total darkness.
For elevated temperature screening, the unit integrates an uncooled Vanadium Oxide (VOx) thermal sensor delivering a 120 x 160 resolution thermal image at 25 fps. Skin-surface temperature is measured across a span of 30 °C to 45 °C with a calibrated accuracy of ±0.5 °C without requiring a black body calibration device, functioning from 0.3 m to 2.0 m target distances.
Deep learning algorithms power swift biometric verification within 0.2 seconds per user with an accuracy rate exceeding 99%. The unit features onboard capacity for up to 50,000 face templates, 50,000 125 kHz EM proximity cards, 5,000 fingerprints, and buffers 100,000 access events locally during network outages.
The terminal features configurable health policy workflows, including forced mask wearing alerts that deny access if a mask is absent, and standalone fast screening mode that logs temperatures without credential verification. It tracks 6 standard shift attendance statuses: Check In, Check Out, Break In, Break Out, Overtime In, and Overtime Out.
Enterprise networking is provided via native TCP/IP for synchronization with HikCentral Professional or iVMS-4200 platforms. Third-party controller integration is supported via standard Wiegand communication, while an RS-485 port connects to secure door control units to prevent door release in the event of external terminal compromise.
The DS-K1T607TEF is intended strictly for indoor, windless installation environments away from direct solar radiation or convective air drafts to ensure thermal sensor accuracy, functioning reliably in ambient temperatures from 0 °C to 50 °C.

Product Information .

Corporate Offices Worship Places Industries, Factories Hospitals, Clinics Libraries Shopping Malls, Showrooms Public Roads Police Station Government Buildings, Offices Banks Airports Railways, Bus Stations Conference Rooms Restaurants Smart Cities High Security Zones Defense Sectors Event Management Server Rooms Basement, Parking Areas Emergency Services Data Centers

System Integration & Hardware Compatibility

The Hikvision DS-K1T607TEF multi-modal biometric access control terminal operates on an embedded Linux platform engineered to interface with modern IP networks, legacy physical security hardware, and enterprise security management software.

Central Management Platform & Software Compatibility

The DS-K1T607TEF provides out-of-the-box system integration with Hikvision security platforms, including iVMS-4200 Client Software and the HikCentral Professional Access Control platform. Utilizing its standard TCP/IP local area network (LAN) communication interface, the terminal handles bidirectional communication for synchronizing credential databases, buffering up to 100,000 local event records during offline states, and transmitting live temperature telemetry alongside real-time entry logs. For cross-facility time-tracking accuracy, the unit supports Network Time Protocol (NTP), automatic server synchronization, and manual time coordination.

Access Control Unit (ACU) & Secure Controller Interfaces

For deployment within existing physical access infrastructure, the terminal is equipped with standard hardware interfaces:

Wiegand Protocol Interface: Enables communication with third-party external access controllers or peripheral Wiegand card readers, facilitating deployment as either an edge authentication reader or a primary controller.
RS-485 Communication: Connects directly to a downstream Hikvision secure door control unit. By routing the physical door lock relay controls through a secure unit on the protected side of the perimeter via RS-485, the terminal prevents door lock bypassing if the exterior housing is dismounted or vandalized.
Power Input Interface: Requires connection to a regulated external 12 VDC, 2 A power supply to support the optical camera, 7-inch LCD touch screen, and thermal imaging array.

Credential Technology & Biometric Subsystem Compatibility

Model nomenclature indicates specific credential subsystem integrations built into the DS-K1T607TEF terminal hardware:

EM Proximity Cards ('E'): Built-in 125 kHz RF reader module compatible with standard 125 kHz EM proximity cards and keyfobs, accommodating an internal memory database of up to 50,000 card credentials.
Optical Fingerprint Reader ('F'): An integrated optical scanning module capable of matching against a local database of up to 5,000 fingerprint templates.
Dual-Lens Optical Face Biometrics: A 2 MP dual-lens visible light camera with Wide Dynamic Range (WDR) and infrared (IR) supplement light, capable of matching against 50,000 stored face templates at distances between 0.3 m and 2.0 m.
Thermal Screening Module ('T'): An uncooled Vanadium Oxide (VOx) sensor (120 x 160 resolution) calibrated for contactless skin-temperature measurement across 30 °C to 45 °C without third-party black body calibration hardware.

Time Attendance System Integration

The terminal interfaces natively with workforce management and payroll workflows by capturing six distinct user attendance statuses directly through the 7-inch touchscreen: Check In, Check Out, Break In, Break Out, Overtime In, and Overtime Out. These event states are transferred across TCP/IP into administrative software alongside timestamp and temperature verification metadata.

Hardware Interface Compatibility Summary

Interface / Port	Connected Subsystem / Device	Operational Role
TCP/IP (Ethernet)	iVMS-4200 / HikCentral Professional / NTP Server	Network management, credential syncing, event logs, and system time synchronization
Wiegand	Third-party access control panels or external card readers	Wiegand credential output/input data pass-through
RS-485	Secure Door Control Unit	Encrypted serial control of door locking mechanisms to eliminate bypass risk
125 kHz RF Antenna	EM Proximity Cards (50,000 capacity)	Contactless 125 kHz RFID credential authentication
DC Power Port	12 VDC, 2 A External Power Supply	Primary terminal operating power

Hikvision DS-K1T607TEF Installation, Wiring, and Site Deployment Guide

Environmental Site Selection Criteria

The Hikvision DS-K1T607TEF biometric terminal must be deployed strictly in indoor, windless operating environments. Maintaining measurement accuracy of ±0.5 °C across the 30 °C to 45 °C (86 °F to 113 °F) screening range requires eliminating ambient thermal interference. The terminal's Vanadium Oxide (VOx) uncooled thermal sensor is sensitive to air velocity and thermal radiation.

Installers must ensure the terminal is positioned away from direct sunlight, doorways leading outside, open windows, drafts, air conditioning vents, radiators, and space heaters. The operational environment must remain within the certified working temperature range of 0 °C to 50 °C (32 °F to 122 °F) and a non-condensing relative humidity between 10% and 90%.

Physical Wall-Mounting and Height Parameters

The DS-K1T607TEF utilizes a wall-mounted installation topology. Field engineers must prepare the mounting surface with dedicated rear cutouts or conduit junctions to accommodate power, data, and peripheral signal cabling through the integrated rear wire pass-throughs.

For optimal dual-lens optical recognition and accurate forehead alignment with the thermal sensor, the terminal must be positioned at an installation height between 1.4 m and 1.9 m above finished floor level. This elevation aligns the 2 MP camera and VOx thermal sensor with approaching pedestrians, maintaining the validated recognition distance of 0.3 m to 2.0 m. The physical unit is equipped with a mechanical anti-tamper switch on the mounting bracket interface that triggers an immediate alarm if the terminal is detached or compromised.

Power Supply and Field Interface Wiring

Stable electrical delivery is required for uninterrupted operation of the 7-inch touch screen, IR supplement LEDs, and internal Linux processing unit:

Power Input: Requires an external regulated power supply providing 12 VDC at 2 A. Ensure conductor gauge prevents line drop over extended cable runs.
Network Communication: Terminate an RJ45 Ethernet link to connect the terminal to the local TCP/IP network for time synchronization (NTP or automatic server sync), event transmission, and firmware management.
RS-485 Protocol: Wire the RS-485 serial communication lines directly to a secure door control unit. In this architecture, the door lock relay is housed remotely on the secure side of the portal, preventing unauthorized door release if the external terminal is vandalized.
Wiegand Interface: Connect the Wiegand interface to external third-party access control panels or auxiliary card readers to integrate with existing building security infrastructure.

Commissioning and System Configuration

Once physically mounted and wired, connect the terminal to Hikvision client software platforms, including iVMS-4200 or HikCentral Professional, via TCP/IP. Verify that system memory registers credential allocations, supporting capacities up to 50,000 faces, 50,000 EM (125 kHz) cards, 5,000 fingerprints, and 100,000 access events.

Configure operational workflows directly via the 1024 x 600 resolution touch screen or the central software interface. Select between fast temperature measurement mode (instant skin-surface screening without authentication) or credential-linked authentication. Configure mask enforcement policies, choosing either mask alert mode (audible reminder with door release) or forced mask wearing alert mode (denial of entry and failed attendance if a face mask is absent).

Installation Specifications Reference

Deployment Parameter	Specification
Mounting Topology	Wall-mounted with rear wiring pass-through
Recommended Installation Height	1.4 m to 1.9 m above finished floor
Biometric & Thermal Distance	0.3 m to 2.0 m
Operating Power Requirements	12 VDC, 2 A external power supply
Operating Ambient Temperature	0 °C to 50 °C (32 °F to 122 °F)
Operating Humidity Limits	10% to 90% (non-condensing)
Network & Hardware Interfaces	TCP/IP LAN, RS-485, Wiegand, Anti-tamper switch
Software Platform Compatibility	iVMS-4200 Client Software, HikCentral Professional

Application Scenarios & Operational Workflows

The Hikvision DS-K1T607TEF is an integrated biometric access control, workforce management, and automated health screening terminal engineered for indoor deployment. By combining facial recognition algorithms, an optical fingerprint module, an EM (125 kHz) card reader, and an uncooled Vanadium Oxide (VOx) thermal sensor, the terminal satisfies multi-layered security and environmental monitoring requirements across industrial, commercial, and institutional facilities.

High-Throughput Enterprise Ingress & Lobby Access

In high-density commercial office lobbies, transit stations, and financial headquarters, entry checkpoints must process high volumes of staff without causing queuing bottlenecks. The DS-K1T607TEF handles rapid pedestrian flow using a 2 MP dual-lens optical camera with Wide Dynamic Range (WDR) and infrared (IR) supplement light, capturing faces in variable lighting conditions.

Rapid Recognition: Processes facial geometry at speeds under 0.2 seconds per user at distances between 0.3 m and 2.0 m with an accuracy rate of ≥ 99%.
Extensive Credential Storage: Supports local capacity for 50,000 face templates and 50,000 EM card credentials, preventing network-dependent authorization delays.
Visual Interface: Features a 7-inch LCD touch screen (1024 × 600 resolution) that provides immediate pass/fail visual feedback and user prompts.

Industrial Workforce Management & Automated Time Attendance

Manufacturing plants, warehouses, and logistics centers require robust time tracking alongside physical perimeter control. The DS-K1T607TEF operates on an embedded Linux operating system and connects over TCP/IP to central administration platforms, including iVMS-4200 Client Software and HikCentral Professional.

6 Shift Attendance Statuses: Workers can log specific duty transitions directly at the terminal interface using Check In, Check Out, Break In, Break Out, Overtime In, and Overtime Out.
Dual Biometric Fallback: Features an integrated optical fingerprint module with a 5,000 fingerprint capacity, enabling secondary biometric verification when environmental conditions or PPE complicate optical face recognition.
Offline Transaction Buffering: Stores up to 100,000 access events locally during network outages, synchronizing event records automatically upon LAN restoration.

Visitor Triage & Infection Control Screening Checkpoints

During health surveillance operations at educational campuses, healthcare entryways, and enterprise reception desks, facility managers use the terminal to automate non-contact health screening protocols.

Fast Temperature Measurement Mode: Operates as a standalone rapid-screening portal that detects a face and reads skin-surface temperature between 30 °C and 45 °C (86 °F to 113 °F) with ±0.5 °C accuracy without requiring registered identity verification or black body calibration.
Configurable Mask Compliance Workflows: Administrators can toggle between standard Mask Alert Mode (issues an audible voice reminder to unmasked individuals while permitting entry) and Forced Mask Wearing Alert Mode (automatically fails authentication and locks access until a mask is detected).

High-Security Critical Infrastructure & Asset Rooms

For data centers, bank cash offices, and critical control rooms where single-factor credential spoofing is a concern, the DS-K1T607TEF provides multi-factor verification topologies. Administrators can mandate combinatorial access criteria, requiring users to present an EM card, verify their optical fingerprint, and confirm facial identity before triggering entry relays.

Secure Door Unit Integration: Interfaces with external secure door control units via RS-485 serial communication, ensuring door lock relays remain physically secured on the safe side of the boundary even if the terminal chassis is vandalized.
Controller Interoperability: Features standard Wiegand protocol interfaces to connect seamlessly with legacy third-party access control panels and secondary readers.
Tamper & Hardware Protection: Incorporates an internal physical anti-tamper switch to flag dismount attempts and an integrated hardware watchdog to prevent operational lockups.

Deployment Environment Specifications

Deployment Parameter	Specified Operational Requirement
Installation Environment	Indoor, windless deployment only (shielded from direct sunlight, air conditioning airflow, radiators, and space heaters)
Mounting Topology	Wall-mounted with rear wiring pass-throughs; suggested height 1.4 m to 1.9 m above the floor
Operating Temperature / Humidity	0 °C to 50 °C (32 °F to 122 °F); 10% to 90% relative humidity (non-condensing)
Input Power Requirement	External 12 VDC, 2 A power supply
Time Synchronization	Network Time Protocol (NTP), manual synchronization, or automated management server sync

Related Products .

Page 1 of 14

Syncing...

Compare with similar products .

	Current Product Hikvision DS K1T607TEF Multi Biometric Access Control Terminal	Face, Finger Based Reader With Temperature and Mask Detection Pro 1400T	Face, Finger Based Reader With Temperature and Mask Detection Algorithm DS K1T607P	+ Add product to compare
SKU	KTI01002003TMDS	KTI0100200RT14T	KTI01002003607P	—
Brand	Hikvision	—	—	—
Price (excl. GST)	Ask for price	Ask for price	Ask for price	—
GST %				—
Authentication-Type	—	—	—	—
Certifications	—	—	—	—
Availability	Made to Order	Made to Order	Made to Order	—
	Ask for price	Ask for price	Ask for price	—