The FAAC B680H hybrid automatic hydraulic boom barrier (ERP reference KTI0200200DEQ80H, customs tariff code 85309000) is engineered for heavy-duty vehicular control across spans from 2 m to 8 m (net clear opening, accommodating modular beam lengths up to 8.3 m). Powered by a 36 Vdc brushless electric motor coupled to a continuous hydraulic pump (3.2 l/min maximum flow capacity), the unit is rated for 100% continuous duty cycle, delivering over 2,000,000 operating cycles without mechanical spring fatigue.
High-Throughput Commercial Parking and Transit Hubs
In high-density commercial parking structures, multi-deck garages, and airport transit lanes, vehicle turnover requires relentless operational uptime and rapid cycle times. Operating with variable motor rotation speeds between 1,000 RPM and 6,000 RPM, the barrier achieves beam raise speeds under 1.5 seconds for 2.3 m profiles. The integrated E680 control board incorporates two high-sensitivity inductive loop detectors directly on the PCB, reducing external controller hardware requirements and simplifying loop installation for vehicle presence and safety interlocks. Absolute encoder management ensures smooth deceleration curves and automatic reversing upon obstacle detection, maintaining safety compliance along mixed pedestrian-vehicular lanes.
Logistics Hubs, Freight Terminals, and Wide-Span Industrial Perimeters
Industrial manufacturing plants, intermodal container terminals, and distribution centres frequently require clear gate passage widths up to 8 meters to permit oversized transport and heavy freight trailers. The B680H supports modular windproof round or elliptically profiled aluminium beams up to 8.3 m, lifting them in less than 6 seconds. Engineered to withstand harsh outdoor conditions:
- Environmental Resilience: Ingress protection rated at IP56 (verified by TÜV Süd) and an operating temperature threshold from -15°C to +65°C using FAAC HP OIL synthetic hydraulic fluid.
- Corrosion Resistance: Internal load-bearing upright protected with a 100-micron epoxy zinc anti-corrosion primer plus paint.
- Perimeter Access Accessories: Compatible with 2 m and 3 m hanging barrier skirts and fixed end support feet for long-reach structural stabilization.
Highway Toll Plazas and Automated Vehicle Identification Points
Toll highways and automated RFID checkpoints demand constant actuation under peak traffic flow without hydraulic overheating. The switching power supply (100 Vac to 240 Vac at 50/60 Hz drawing 240 W) paired with brushless hydraulic mechanics eliminates standard electro-mechanical gear wear. The optional anti-vandalism hydraulic bypass valve provides internal fluid circuit protection against forced boom displacement, while dedicated connectors on the E680 board allow communication via plug-in GSM, Ethernet, and Wi-Fi modules.
Brownfield Infrastructure and Legacy Barrier Retrofits
For facility upgrades replacing aging barrier infrastructure, the B680H upright post is designed to be fully retrocompatible with legacy FAAC 620 and FAAC 640 foundation plates. System technicians can anchor the core upright, pocket, and beam assemblies directly onto existing foundations without breaking ground or pouring fresh concrete. Commissioning is streamlined through the transparent upper E680 controller box featuring pre-fitted DIN rails and two-step automated configuration.
Continuous Operations and Substation Power-Loss Scenarios
At mission-critical checkpoints where gate continuity is mandatory during mains supply disruptions, the barrier integrates with the optional XBAT 24 emergency backup module featuring Nickel-Metal Hydride cells (they are not included) and a built-in charger. For manual contingency overrides, the anti-panic mechanical group allows rapid manual release of the hydraulic pressure circuit.
