Answer:
The FAAC 844 R 3 PH requires an external FAAC 844 T three-phase microprocessor control board (not included with the operator). It is compatible with Z12 and Z16 drive pinions, inductive limit switches, FOTOSWITCH photocells, FAACLIGHT indicators, T10 key selectors, and CN 60 E safety edges.
The FAAC 844 R 3 PH operator integrates with specific control units, rack drives, and peripheral automation hardware:
- Control Unit Requirements: The motor is managed via the remote-mounted FAAC 844 T microprocessor control unit (control board not included with the gearmotor unit). The 844 T handles motor loads up to 1.3 kW, integrates power contactors, features an electronic braking device, and provides a 24 Vdc (500 mA max) auxiliary power output.
- Pinion Compatibility: Designed to mount either standard Z12 or Z16 rack pinions depending on project parameters (Z12 for gates up to 2,200 kg at 7.2 m/min; Z16 for gates up to 1,600 kg at 9.5 m/min).
- Position Detection: Standard system interface uses an inductive limit switch assembly actuated by mechanical target plates mounted to the gate rack.
- Mounting Hardware: Compatible with an optional galvanised steel foundation plate with integrated side and height adjustments.
- Peripheral Accessories: Wire diagrams support the FAACLIGHT flashing indicator lamp, T10 key selector switch, PLUS 1 433 radio receiver cards, FOTOSWITCH infrared photocell safety sets, and CN 60 E safety edges.
