Executing a reliable deployment of the eSSL Aiface Mars+QR terminal requires structured planning across physical mounting, electrical connections, peripheral hardware integration, and network provisioning. The Linux-based multi-biometric terminal provides native support for face recognition, optical barcode scanning, RFID badges, and digital pin codes, necessitating systematic integration with door hardware and management networks.
Mechanical Footprint and Environmental Planning
The unit features compact exterior dimensions of 91.93 mm in width, 202.93 mm in height, and 21.50 mm in depth. When selecting the installation location on a flat surface, wall, or turnstile bracket, positioning should optimize the field of view for the integrated 2MP WDR low-light optical camera and allow comfortable user interaction with the 5-inch touch screen interface.
Installers must verify that ambient conditions remain within the specified operational tolerances: an operating temperature range between -10°C and 45°C, and a non-condensing relative humidity level between 10% and 90%. The 2MP wide dynamic range (WDR) sensor accommodates varying ambient lighting conditions, but direct exposure to high-intensity outdoor weather elements beyond these ratings must be prevented.
Electrical Connections and Power Supply Specifications
The eSSL Aiface Mars+QR requires a stable external power input rated at DC 12V with a minimum current capacity of 3A. To avoid transient voltage drop and operational instability during relay switching or heavy compute cycles handled by the 900MHz Dual Core CPU, installers must use appropriately gauged wiring between the central power supply and the terminal's power terminals.
Access Control Peripheral and Auxiliary Interfaces
The terminal integrates native access control terminal blocks designed to interface directly with door hardware, input triggers, and local security systems:
- Electric Lock Control: Direct output wiring interfaces to control electromagnetic locks (EM locks) or electric strike/bolt locks.
- Door Sensor: Input terminals connect to magnetic door contacts to monitor open/closed door states in real time.
- Exit Button: Dedicated digital input terminals accept normally open (NO) push button connections to trigger egress cycles.
- Auxiliary Input: Auxiliary input terminals enable hardware integration with third-party dry-contact triggers, smoke detectors, or fire alarm links.
- Auxiliary Alarm Output: Auxiliary output terminals connect to external audible alarms, strobes, or security relay panels during tamper or unauthorized events.
| Interface Type | Connection Purpose | Hardware Destination |
|---|
| Power In | DC 12V, 3A | Regulated DC Power Source |
| Lock Output | Lock Actuation | Electromagnetic Lock / Electric Lock |
| Sensor Input | Door Status Detection | Magnetic Door Sensor |
| Egress Input | Exit Request | Push-to-Exit Button |
| Auxiliary In/Out | Security Automation | Auxiliary Trigger / Alarm Sounder |
| Wiegand Port | Access Protocol Data | Third-Party Controller / Slave Reader |
Network Topology and Controller Interoperability
Data transmission and system configuration utilize an onboard TCP/IP Ethernet port, connecting the terminal directly to local network switches for centralized record synchronization with eSSL eTimeTracklite and eBioServer software suites. For deployments requiring flexible layout options, the optional Wi-Fi interface can be provisioned.
For multi-device sub-networks, RS485 communication terminals allow serial device networking. The terminal also features independent Wiegand Input and Wiegand Output interfaces, allowing it to either pass verified credentials (face, QR code, or card data) to third-party access control panels or ingest signals from external peripheral readers.