3M 6200 Reusable Half Face Mask Respirator, Medium

KTI120010Z3M62

Product Description

The 3M 6200 is a lightweight, low-maintenance half facepiece reusable respirator engineered for balanced comfort and respiratory protection in demanding industrial environments.

Make/Brand: 3M
Model: 6200 (Medium)
Product Series: Half Mask 6000 Series (3M ID: XA007702658)
Facepiece Material: Thermoplastic Elastomer (TPE) in grey finish
Net Weight: 82 g (bare facepiece)
Suspension System: 4-point head harness cradle suspension for even tension distribution
Filter Connection: Twin bayonet twist-lock fitting mechanism
Compatibility: Compatible with 3M 6000 series gas and vapour cartridges, 3M 2000, 2200, 5000, and 7093 series particulate filters, and 3M Dual Airline supplied air systems
Standards & Compliance: EN 140:1998, CE Approved, NIOSH approved under 42 CFR 84
Scope of Supply: Bare reusable facepiece assembly only; filter cartridges sold separately

KTI120010Z3M62

Price

₹ 1,318.75 excl. GST

+ 5.00% GST. Freight after pincode at cart.

Registered dealers see net rates after login

Product Details
Available Brands	3M
Unit	Numbers
HSN Code	90200000
Weight	0.082 kg
Warranty	Not Applicable
Tags/categories	Safety PPE Personal Protective Equipment Respiratory Face Mask

Usually dispatched within 7 days

About this product .

The 3M 6200 reusable half face mask respirator is engineered around a lightweight Thermoplastic Elastomer (TPE) facepiece that delivers exceptional comfort and sealing stability during extended work shifts. At an ultra-light net weight of just 82 grams, the elastomeric body conforms closely to facial contours while reducing user fatigue across multi-hour duty cycles.
Featuring an integrated 4-point harness cradle suspension system, the respirator distributes strap tension evenly across the crown and back of the head. Quick-adjust neck straps and crown guides enable quick donning and adjustment, maintaining an airtight face-to-flange seal without creating excessive pressure points along the nasal bridge.
The dual twin-filter port configuration places filter cartridges at the sides of the face, reducing breathing resistance and providing optimal weight balance. This low-profile geometry preserves an unobstructed field of view and ensures seamless physical compatibility with supplementary personal protective gear, including safety spectacles, goggles, and welding face shields.
Equipped with 3M's standard bayonet connection fitting system, the 6200 facepiece pairs with a wide spectrum of 3M respiratory filters. It securely attaches to 3M 6000 Series gas and organic vapour cartridges, particulate pre-filters, and particulate disc filters, and can also be integrated into 3M Supplied Air dual airline setups for supplied-air operations.
Certified to European Standard EN 140:1998 with CE approval and rated under NIOSH regulations, the 3M 6200 meets rigorous occupational safety requirements. It is widely specified across heavy infrastructure, construction, general manufacturing, industrial maintenance, marine operations, and petrochemical processing facilities.
Maintenance is straightforward and cost-effective, as the elastomeric body can be fully disassembled, sanitized in warm neutral cleaning solutions below 50°C, and inspected for recurring service life. Replaceable inhalation and exhalation valves preserve the longevity of the core facepiece, maximizing return on PPE investments.

Product Information .

Hospitals, Clinics Industries, Factories Laboratries Banks Chemical Plants Pharma Industries

3M 6200 Filter, Cartridge, and PPE System Compatibility

Bayonet Cartridge and Particulate Filter Interface

The 3M 6200 medium reusable half facepiece is engineered with an integrated twin bayonet connection fitting system. This mechanical twist-lock mounting interface provides positive mechanical retention for an extensive selection of 3M gas, vapour, and particulate protection elements. Cartridge alignment is achieved by matching the raised indexing notch on the filter or cartridge body with the alignment mark on the facepiece port, followed by a quarter-turn clockwise rotation to lock the element securely in place against the elastomeric seal.

Because the unit is supplied as a standalone facepiece without cartridges or filters included, safety managers can configure the platform specifically for site hazards. The dual-port twin-filter geometry provides a balanced weight distribution across the user's face and delivers lower overall breathing resistance compared to single-inlet respiratory facepieces.

Compatible 3M Filter and Cartridge Product Lines

The bayonet port architecture of the 3M 6200 respirator provides direct, native physical compatibility with the following standard 3M respiratory media:

3M 6000 Series Gas and Vapour Cartridges: Native bayonet locking for gas and chemical vapour filtration, including the 3M 6003 organic vapour and acid gas cartridge configuration.
3M 2000 and 2200 Series Particulate Filters: Low-profile disc filters that attach directly to the twin bayonet ports for dust, mist, and particulate capture.
3M 5000 Series Particulate Pre-filters: Replaceable particulate media compatible with 3M chemical cartridges when combined with appropriate filter retainers.
3M 7093 Series Particulate Filters: Enclosed hard-case particulate filter units engineered for harsh environments where direct mechanical protection of the filter media is required.

Supplied Air Dual Airline System Integration

In addition to standard negative-pressure ambient air-purifying operation, the 3M 6200 facepiece is tested and approved for integration into supplied-air systems. The respirator is NIOSH approved for both negative-pressure air-purifying filter operation and supplied-air dual airline applications, enabling plants to deploy the same facepiece in continuous-flow compressed airline systems across heavy industrial operations.

Optical and Headgear Interoperability

The 3M 6200 elastomeric body features a swept-back, low-profile contour designed to sit low across the nasal bridge. This compact profile minimises visual interference and preserves the user's lower field of view, ensuring seamless mechanical compatibility with adjacent eye and head PPE. The facepiece maintains clear clearance when worn alongside:

Industrial safety spectacles and prescription safety eyewear
Sealed chemical splash and dust goggles
Welding shields, visors, and standard head-top grinding screens

System Compatibility Reference

System Configuration	Compatible Series / Product Line	Mounting Mechanism
Gas & Vapour Protection	3M 6000 Series (including 3M 6003)	Twin Bayonet Twist-Lock
Particulate Protection	3M 2000, 2200, 5000, and 7093 Series	Direct Bayonet / Filter Retainer
Supplied Air Applications	3M Dual Airline Supplied Air Systems	NIOSH Approved Dual Airline Adaptor
Secondary Head/Eye PPE	Safety spectacles, safety goggles, welding shields	Clearance via low-profile TPE design

Standardised under European standard EN 140:1998 (CE Approved) and certified by NIOSH under 42 CFR 84 for dual airline and negative-pressure configurations, the 3M 6200 platform integrates into multi-industry PPE inventories across construction, mining, transportation, general manufacturing, marine, and oil & gas maintenance facilities.

Donning, Fitting, and Bayonet Component Installation Guide

Donning and 4-Point Harness Cradle Adjustment

Proper fitment of the 3M 6200 medium-size half facepiece reusable respirator is critical for establishing an airtight facial seal prior to entering hazardous atmospheres. The assembly features an integrated 4-point harness cradle suspension system engineered to distribute tension evenly across the crown and back of the neck, supporting the lightweight 82 g Thermoplastic Elastomer (TPE) facepiece without localized pressure points.

Crown Cradle Placement: Position the contoured head cradle directly over the crown of the head. Grasp the lower straps, hold the grey facepiece firmly over the mouth and nose bridge, and bring the lower straps behind the neck to latch the retaining clip securely.
Tension Balancing: Progressively tighten the upper harness straps first by pulling the strap tabs straight back toward the rear of the head. Next, tighten the lower neck straps to pull the bottom of the TPE elastomeric flange comfortably against the throat and chin.
Preventing Over-Tightening: Tension must be uniform across all four suspension anchors. Do not over-tighten the harness assembly; excessive strap tension distorts the flexible TPE perimeter sealing edge, inducing inward leakage channels at the nasal arch or jawline.
Facial Hair Compliance: Verify that no facial hair, beard stubble, or sideburns intersect the sealing perimeter. Any hair crossing the elastomeric boundary disrupts negative-pressure seal integrity.

Bayonet Filter and Chemical Cartridge Installation

The 3M 6200 facepiece utilizes a twin-filter dual-port geometry incorporating mechanical bayonet locking interfaces. This symmetrical design balances mass distribution across the user's face while lowering total inhalation breathing resistance during prolonged shifts in heavy infrastructure, mining, or manufacturing environments.

Notch Alignment: Align the raised alignment notch on the selected 3M filter or chemical cartridge (such as 3M 6000 Series gas/vapour cartridges like 3M 6003, or particulate filters from the 2000, 2200, 5000, or 7093 Series) with the corresponding alignment marker positioned on the facepiece bayonet port.
Clockwise Engagement: Press the cartridge firmly inward against the elastomeric bayonet gasket and rotate the cartridge a quarter-turn clockwise until it firmly clicks into its mechanical detent. Repeat this procedure for the opposing bayonet port to ensure dual-cartridge operational symmetry.
Supplied Air Configuration: When deploying the facepiece within NIOSH approved continuous-flow or negative-pressure dual airline setups, couple the compatible 3M supplied air breathing tubes directly into the bayonet ports via the matching twist-lock fittings.

Pre-Use Seal Check and Secondary PPE Integration

A mandatory user seal check must be executed before entering any contaminated operational zone. For a positive-pressure seal check, place the palm over the central exhalation valve cover and exhale gently; the grey elastomeric facepiece should bulge slightly with no outward air escaping past the TPE sealing flange. For a negative-pressure seal check on sealed cartridges or particulate filters, cover the filter intake faces with the hands or appropriate check caps and inhale gently; the facepiece should collapse slightly inward toward the face with no inward airflow detected.

The compact, low-profile architecture of the 3M 6200 ensures unimpeded visual range and seamless physical clearance beneath secondary PPE, including safety spectacles, chemical splash goggles, and welding shields deployed across construction, marine maintenance, and oil & gas operations.

Maintenance, Cleaning & Inspection Protocol for 3M 6200 Facepiece

Disassembly and Pre-Cleaning Procedures

Routine maintenance of the 3M 6200 medium half facepiece reusable respirator begins with disengaging all respiratory consumables. Remove the bayonet-mounted gas and vapour cartridges (such as 3M 6000 Series or 3M 6003) or particulate filters (including the 2000, 2200, 5000, or 7093 Series) by twisting them counter-clockwise from the twin bayonet connection fittings. Saturated or spent filtration elements must be detached and disposed of according to standard facility safety guidelines before beginning liquid cleaning of the 82 g facepiece body.

Carefully inspect the bare grey Thermoplastic Elastomer (TPE) body, the 4-point harness cradle suspension, and the central exhalation valve assembly. Check the flexible sealing flange for tears, nicks, or permanent distortion caused by improper storage or over-tightening. Confirm that the central exhalation valve disc seats flat against its housing without debris, curling, or particulate accumulation that could impede proper sealing during exhalation cycles.

Washing and Sanitisation Guidelines

To preserve the structural integrity and flexibility of the Thermoplastic Elastomer (TPE) facepiece, facility maintenance procedures must adhere to specific cleaning parameters:

Cleaning Solution: Submerge the disassembled elastomeric facepiece in warm soapy water or a neutral cleaning solution. The water temperature must remain strictly below 50°C to prevent thermal warping of the TPE material and strap anchor points.
Washing Action: Clean the elastomeric surfaces, bayonet ports, and valve housings using a soft-bristled brush or lint-free cloth. Do not apply solvent-based agents, industrial degreasers, or abrasive scouring pads, as these will degrade the elastomer.
Rinsing: Thoroughly rinse the facepiece in clean, warm running water to remove all detergent residue, which can cause skin irritation or interfere with seal integrity.
Drying: Allow all components to air-dry thoroughly in an uncontaminated atmosphere away from direct sunlight, open heat sources, and industrial air contaminants.

Reassembly and Component Inspection

Once dried, inspect and reassemble the 3M 6200 components. Check that the 4-point harness cradle suspension operates smoothly and that the tensioners adjust freely across all four anchoring points. Verify that the twin bayonet fittings are clean and devoid of particulate buildup before reconnecting filters or chemical cartridges via the clockwise twist-lock mechanism.

Ensure that the central exhalation valve flap remains properly centered and completely flat against the valve seat. An unseated or distorted exhalation valve can allow unfiltered air, vapours, or particulate matter to enter the breathing zone during inhalation.

Pre-Use Seal Checks and Troubleshooting

Prior to redeployment in demanding environments such as general manufacturing, mining, oil and gas, heavy infrastructure, or construction, personnel must perform user seal checks:

Positive Pressure User Seal Check: Cover the central exhalation valve with the palm of your hand and exhale gently. The facepiece should slightly bulge outward without air escaping past the perimeter seal.
Negative Pressure User Seal Check: Cover the cartridge or filter inlet openings, inhale gently until the facepiece collapses slightly, and hold your breath for approximately 10 seconds. The mask should remain collapsed without inward air leakage.
Facial Seal Precautions: Wearers must be clean-shaven; facial hair, stubble, or sideburns passing across the sealing edge will compromise airtight isolation, preventing compliance with EN 140:1998 and NIOSH standards.
Tension Adjustment: Avoid excessive over-tightening of the 4-point head cradle. Over-tightening can distort the flexible TPE flange and create peripheral leak channels around the nasal bridge and chin.

Storage and Multi-Shift Care

Store the clean, dry respirator facepiece in a clean, dry location away from contaminated work areas, industrial fumes, paint overspray, and high temperatures. Storing the facepiece in an uncompressed, relaxed position prevents deformation of the Thermoplastic Elastomer body, maintaining repeatable fit and reliable respiratory protection across multi-shift reuse schedules.

Industrial Applications and Operational Deployment of the 3M 6200 Respirator

The 3M 6200 medium-size half facepiece reusable respirator is engineered for versatile respiratory safety deployments across demanding industrial, production, and heavy construction environments. Weighing just 82 g and molded from grey Thermoplastic Elastomer (TPE), this elastomeric facepiece provides balanced weight distribution through its twin-filter dual-port geometry, ensuring low breathing resistance and prolonged worker comfort across multi-hour operational shifts.

General Manufacturing and Industrial Maintenance

In manufacturing assembly plants and industrial plant maintenance, workers routinely encounter airborne particulate matter, process fumes, and organic vapours. The 3M 6200 serves as an adaptable respiratory platform when paired via its bayonet connection to 3M 6000 Series gas and vapour cartridges (such as 3M 6003) or mechanical particulate filters (including the 2000, 2200, 5000, and 7093 Series). Typical deployment duties include:

Machine rebuilding, plant equipment overhaul, and mechanical degreasing operations.
Routine chemical transfer, batch compounding, and solvent handling.
Facility-wide preventative maintenance in utility rooms and enclosed plant enclosures.

Construction, Design & Construction, and Heavy Infrastructure

Civil engineering contractors and heavy infrastructure teams deploy the 3M 6200 to safeguard site crews during structural installation, excavation, and renovation tasks. Certified to EN 140:1998 and NIOSH-approved under 42 CFR 84, the respirator secures tightly with a 4-point cradle suspension harness that prevents shifting while personnel navigate ladders, scaffolding, and variable site terrain. Its low-profile structure avoids obstruction with structural members and ensures full downward visibility when monitoring uneven floor surfaces.

Mining and Heavy Extraction Sectors

Mining environments subject respiratory equipment to elevated dust loadings and abrasive atmospheres. The rugged TPE elastomeric facepiece of the 3M 6200 resists physical distortion and can be dismantled, washed in warm soapy water (below 50°C), sanitized, and reassembled for continuous multi-shift reuse, lowering lifecycle consumable costs in surface and subsurface extraction operations.

Oil & Gas, Marine, and Transportation Systems

Marine shipyards, offshore platforms, refineries, and transportation maintenance depots require respiratory protection certified against multifaceted chemical and ambient hazards. The 3M 6200 handles:

Vessel engine room overhauls, bilge servicing, and tank cleaning protocols in marine operations.
Refinery maintenance turnarounds, pipeline flange breaks, and valve service checks in oil and gas installations.
Fleet vehicle refinishing, rail car refurbishment, and transport depot sanding or painting operations.

Supplied Air Dual Airline System Integration

Beyond traditional negative-pressure air-purifying filtration, the 3M 6200 is NIOSH certified for integration into 3M Supplied Air dual airline systems. Industrial facilities operating stationary breathing air systems or continuous-flow airlines can connect the facepiece to compressed air feeds, providing prolonged protection in environments requiring higher air delivery without adding localized filter load to the worker.

Compatibility with Auxiliary Eye and Face Protection

Because the 3M 6200 features a swept-back, low-profile nose bridge and compact lateral bayonet ports, it integrates directly with safety spectacles, full-coverage goggles, and welding shields without displacing optical PPE or breaking the perimeter seal on the wearer's face.

Related Products .

Page 1 of 7

Syncing...

Compare with similar products .

	Current Product 3M 6200 Reusable Half Face Mask Respirator, Medium	Honeywell 5500 Series Elastomeric Half Face Mask Respirator Without Cartridge	Reusable Face Mask With 6 Layeres	+ Add product to compare
SKU	KTI120010Z3M62	KTI120010ZHFMH	KTI13001003RECM	—
Brand	3M	Honeywell	—	—
Price (excl. GST)	₹ 1,318.75 excl. GST	Ask for price	Ask for price	—
GST %	5.00%			—
Certifications	—	—	—	—
Availability	Made to Order	Made to Order	Made to Order	—
		Ask for price	Ask for price	—