Access Controller and Panel Compatibility
The ZKTeco TS1000 Plus Series vertical compact tripod turnstile (model code ECTS-A121-SH) is engineered for broad interoperability with standard industrial and commercial access control platforms. The turnstile is specifically optimized for deployment with ZKTeco access controllers, with the ZKTeco C3-200 Pro Plus and InBio260 Pro Plus recommended for managing credential validation, multi-lane coordination, and bi-directional passage tracking.
Motherboard Hardware Interfaces and Alarm Integration
The turnstile motherboard provides standard industrial interfaces to integrate directly with external security, building management, and life-safety systems:
- Fire Alarm Relay Port: Features one dedicated fire signal input utilizing a voltage-free dry contact. When connected to a central fire alarm panel, the contact automatically engages the turnstile's drop-arm mechanism to allow clear, unhindered evacuation during emergency situations.
- RS485 Communication Port: Equipped with one RS485 port on the mainboard for industrial serial communications, peripheral configuration, and real-time operational feedback.
- Cabling and Conduit Ingress: The chassis base is designed to accept power wiring, Ethernet networking cables, and fire signal wiring routed through standard 20 mm diameter PVC conduits.
Authentication Readers and Credential Module Support
The TS1000 Plus Series accommodates multiple credential verification technologies inside its compact SUS304 stainless steel cabinet to match facility access requirements:
- Undermount RFID Readers: Fully compatible with factory-supported undermount RFID readers, specifically the ZKTeco ProID Series and ZKTeco KR Series, supporting flow rates up to 25 passengers per minute.
- Biometric Fingerprint Authentication: Compatible with integrated fingerprint scanning hardware, delivering throughput of up to 20 passengers per minute.
- QR Code and Barcode Scanners: Supports integrated QR readers for ticketing systems, guest management, and visitor badge verification.
- Remote Control Accessibility: Compatible with both wired remote control panels and wireless remote control modules for security booth overrides and receptionist control.
Electrical Compatibility and Power Supply Requirements
The internal power supply module operates across universal electrical utility standards, supporting AC 110V / 220V at 50/60 Hz along with DC 12V operating circuitry. Power consumption remains low at 10VA in standby mode and 40VA during active mechanical cycle rotation.
System Compatibility Matrix
| Subsystem / Interface | Supported Specification / Model |
|---|---|
| Access Controllers | ZKTeco C3-200 Pro Plus, InBio260 Pro Plus (Recommended) |
| Undermount RFID Readers | ZKTeco ProID Series, ZKTeco KR Series (25 passengers/min) |
| Biometric Identification | Fingerprint verification modules (20 passengers/min) |
| Visitor & Override Controls | QR code readers, wired remote controls, wireless remote controls |
| Life Safety / Fire Release | 1x Voltage-free relay input for automatic arm collapse |
| Serial Communication | 1x RS485 port |
| Power Supply Line | 110V / 220V AC @ 50 to 60 Hz, DC 12V (10VA standby / 40VA operation) |
| Inter-Device Spacing | 100 mm gap between parallel units; 100 mm wall clearance for top lid opening |
