The ZKTeco Saturn-T1000 drop arm tripod turnstile is supplied in a pre-assembled configuration to simplify on-site deployment, reduce mechanical assembly time, and streamline integration into access control perimeters. Proper site planning, wiring, and interface connection ensure optimal operation for high-throughput entry points across schools, gymnasiums, industrial plants, and commercial facilities.
Site Planning and Architectural Footprint
The Saturn-T1000 requires a flat, level concrete foundation to anchor its 150 mm × 1200 mm base footprint. The unit’s total assembled physical envelope measures 1200 mm (L) × 734 mm (W) × 1020 mm (H), establishing a standard pedestrian lane passage width of 550 mm. When planning multi-lane arrays, ensure adequate clearance is maintained between cabinets to allow unobstructed rotation of the SUS304 stainless steel tripod arms (38 mm rod diameter).
The system is rated IPX4 for splash resistance and features an internal protection disc to isolate the mechanical rotating assembly from airborne dust, corrosive vapor, and moisture ingress. It supports operating temperatures from -20°C to 70°C with non-condensing relative humidity between 20% and 80%. For outdoor deployments, the turnstile must be positioned under a sheltered canopy.
Power Supply and Electrical Wiring
Electrical conduits should be routed through the sub-floor directly into the bottom cable entry of the cold-rolled SPCC steel cabinet. The internal power supply accepts an input of AC 110V/220V at 50/60Hz and converts it to DC 12V for turnstile logic and mechanism actuation. Operating power consumption is rated at 40W during active rotation and 10W in idle standby mode.
Access Control and Peripheral Integration
The turnstile motherboard includes dedicated terminal interfaces for third-party and native ZKTeco access controllers, such as the C3 series and InBio series controllers. The motherboard provides 1 RS485 communication port and 1 dedicated fire alarm relay port for automated emergency control.
- Authentication Hardware: The upper housing, constructed with a polycarbonate and 2.5D tempered glass lid, accommodates integrated readers including the KR800E RFID reader, FR1500S fingerprint scanner, or optical QR code scanners.
- Signage and Feedback: The built-in LED indicator located at the authentication zone displays a green directional arrow for authorized passage and a red indicator for prohibited or opposite-direction access.
- Software Management: Interfacing the onboard controllers with ZKBio CVAccess or ZKBio CVSecurity platforms enables centralized door open duration adjustments and directional pass mode management.
Emergency Drop-Arm and Safety Configuration
The Saturn-T1000 incorporates a fail-safe automatic drop-arm mechanism. In the event of primary power loss or upon receiving an active signal from the fire alarm relay input, the horizontal arm automatically releases and drops downward to create an unobstructed emergency egress lane. Bi-directional operating modes—such as one-way free, one-way controlled standard passage, or bidirectional access control—can be configured directly on the turnstile motherboard.
| Installation Parameter | Specification |
|---|---|
| Mounting Footprint | 150 mm × 1200 mm |
| Overall Cabinet Dimensions (L × W × H) | 1200 mm × 734 mm × 1020 mm |
| Lane Passage Width | 550 mm |
| Net Unit Weight | 25 kg (Gross shipping weight: 30 kg) |
| Input Voltage | AC 110V / 220V, 50/60Hz (DC 12V Operating) |
| Power Draw | 40W (Running) / 10W (Standby) |
| Emergency Control | 1 × Fire Alarm Relay Port (Auto Drop-Arm) |
| Communication Interface | 1 × RS485 Port |
| Arm Mechanical Load Limit | 40 kg vertical load at arm end |
| Delivery State | Pre-assembled |
.png)