The ZKTeco Saturn S1200 Dual Swing barrier turnstile is engineered as an intermediate expansion unit designed to interface seamlessly with Saturn Series master units, access control hardware, and facility management infrastructure. Featuring a dual-sided swinging mechanism, the Saturn S1200 enables multi-lane pedestrian throughput configurations across commercial, transit, corporate, and institutional environments.
Access Control Credential & Reader Integration
The Saturn S1200 lid incorporates polycarbonate construction integrated with 2.5D scratch-resistant tempered glass specifically situated over the authentication zone. This structural surface accommodates diverse access control terminal hardware configurations:
- Undermount RFID Readers: Integrates beneath the protective 2.5D tempered glass area to read standard contactless proximity cards and smart cards without surface exposure.
- Undermount QR / Barcode Scanners: Supports embedded optical scanning modules beneath the glass lid for visitor badge scanning, mobile ticketing, and dynamic QR credential verification.
- Surface-Mounted Facial Recognition Terminals: Supports top-mounting brackets and structural standoffs for biometric facial authentication terminals, enabling high-throughput walk-through verification.
Multi-Lane Array & Architectural Expansion
The Saturn S1200 is purpose-built as an intermediate dual swing module to multiply lane capacity. When combined with single-barrier terminal pedestals, each Saturn S1200 unit creates an additional contiguous passage:
| Configuration Parameter | Specification / Compatibility Standard |
|---|---|
| Turnstile Role | Dual Swing Intermediate Expansion Unit (for additional lanes) |
| Standard Lane Width | 650 mm clearance |
| Optional Wide Lane Width | 900 mm clearance (accessible passage) |
| Drive System | High-performance DC brushless motor |
| Movement Speed | Average 1s per movement (adjustable open/close timing) |
| Acoustic Level | < 60 dB low-noise operation |
| Sensor Array | 4 pairs of infrared sensors for dual-zone pinch protection |
| Chassis Standard | Cold-rolled SPCC steel conforming to GB700 |
| Environmental Ingress | IPX4 protection rating against dust and water splashing |
Electrical & Environmental Infrastructure Interfacing
For facility power infrastructure, the Saturn S1200 integrates directly into standard single-phase mains supplies, supporting 110V / 220V ±10% AC at 50Hz/60Hz. The high-efficiency DC brushless motor operates at noise levels under 60 dB, ensuring compliance with strict acoustic standards in corporate lobbies, libraries, and commercial headquarters.
Chassis construction from cold-rolled SPCC steel conforming to GB700 paired with an IPX4 environmental rating provides resistance against dust and splashing water, making the hardware compatible with both indoor installations and sheltered outdoor pedestrian access points. Modular internal component layouts deliver a Mean Time to Repair (MTTR) of under 60 minutes and support heavy duty cycles verified by a Mean Cycles Between Failures (MCBF) rating of 3 million cycles.
.png)