The Yale RC 100 Remote Control (KT Automation internal reference KTI0100408RC100) is an optional wireless access accessory engineered to provide remote unlocking capabilities across an extensive range of Yale digital and smart door lock systems. Seamless integration requires verifying physical hardware slot provisions and system module prerequisites before deployment in commercial or residential access control systems.
Compatible Yale Smart Door Lock Series
The Yale RC 100 remote control is engineered to pair across multiple standard Yale digital door lock product lines. System compatibility extends across the following primary lock series:
- Yale YDM Series: High-security mortise smart lock assemblies.
- Yale YDR Series: Rim and deadbolt digital locking units.
- Yale YDD Series: Heavy-duty digital deadbolt systems.
- Yale YMI Series: Push-pull intelligent digital lock units.
- Yale YMF Series: Premium biometric and PIN mortise lock installations.
- Yale J20 / J 20 Series: Compact digital rim lock architectures.
- Yale G-Slide Series: Specialized sliding and glass door digital locking hardware.
Verified Smart Lock Model Directory
When evaluated at the specific model level, the Yale RC 100 remote control interface is verified for interoperability with the following smart door lock models:
- Yale YDM 3109 and Yale YDM 4109
- Yale YDM 4109RL+ and Yale YDM 7116
- Yale YMF 40
- Yale YDD 424
- Yale YDR 41 and Yale YDR 4110
- Yale YDR 50G
- Yale J 20
- Yale YMI 70
- Yale Luna Pro+ and Yale Luna Elite
Mandatory Hardware Prerequisite: Receiver Module
The Yale RC 100 remote control cannot communicate directly with standalone smart locks out of the box. Operation requires the installation of a compatible Yale Remote Control Receiver Module—specifically model YRM 20 or YRM 20 N. The receiver module acts as the wireless communication bridge between the RC 100 transmitter and the lock controller board.
If a lock assembly lacks the YRM 20 or YRM 20 N module, the RC 100 cannot register or execute push-button unlocking commands. System specifiers and procurement teams must ensure the corresponding receiver module is provisioned for every smart lock intended to be paired with an RC 100 remote.
Module Slot Location & Hardware Integration
Physical integration of the required receiver module is completed at the interior escutcheon of the lock assembly. The YRM 20 / YRM 20 N receiver module must be firmly inserted into the designated slot positioned directly behind the battery (they are not included) compartment cover on the lock's inner back panel. Once the receiver module is seated within the back panel slot and lock power is active via its standard battery (they are not included) supply, the registration and pairing sequence for the RC 100 handheld unit can be executed.
Operational Range & Infrastructure Considerations
The RC 100 provides push-button wireless transmission over an operational range of up to 50 meters in clear line-of-sight conditions. This operational envelope makes the system compatible with architectural setups such as commercial reception counters, security intake desks, interior partition offices, and executive suites where facility staff require rapid door release without approaching the doorway or launching mobile applications. When transmission range diminishes during field use, the handheld unit requires battery (they are not included) replacement to restore nominal 50-meter operation.
