The Magnetic Pedestrian E-Series MPRe-112-SS Glass-1 Lane retractable flap barrier is engineered to interface seamlessly with third-party physical security infrastructure, host access control hardware, and transit management platforms. Designed for facilities requiring rapid passenger separation, the barrier operates in a normally closed configuration and connects directly with external validation devices across industrial, commercial, and transport environments.
Access Control and Peripheral Device Interfacing
The MPRe-112 platform features open architecture support for all standard access control systems. Physical and electronic interfaces permit the direct integration of customer-specified identification hardware, including contactless card readers, barcode scanners, biometrics, and ticketing mechanisms. This universal host compatibility supports operational deployments across automated fare collection (AFC), airport boarding gates, immigration checkpoints, and commercial facility access points handling passenger throughput rates of up to 40 persons per minute.
Cabinet Modularity and Multi-Lane Expansion
The standard single-lane configuration comprises two primary perimeter cabinets: Module A (STD) 1 and Module B (STD) 1, establishing a standard clear passage width of 520 mm. For multi-lane entry points, the MPRe line allows structured line configurations using combinable modular segments (Modules A through F):
- Module A and Module B: Provide single-lane boundary control and housing for primary drive components and end-of-bank containment.
- Combinable Intermediate Modules (C, D, E, and F): Enable continuous multi-lane extensions from a shared cabinet footprint, reducing total installation width across large access concourses.
- Spatial Requirements: Each standard cabinet occupies a footprint of 1300 mm in length, 250 mm in width, and 1035 mm in height, requiring level floor mounting to maintain proper wing alignment.
Electrical Supply and Emergency Integration
The barrier is powered by a high-efficiency MHTM (Magnetic High Torque Motor) drive requiring a wide-range input voltage of 110 to 240 VAC at 50/60 Hz. The electrical system maintains an exceptionally low maximum power consumption of 35 W under continuous operation, backed by a 100% duty cycle rating across 10 million opening and closing cycles. In emergency or safety-critical events involving primary line power interruption, the barrier features an integrated fail-safe mechanism that automatically retracts both wing elements into the housing, ensuring an unobstructed egress route without requiring manual override.
Sensor Integration and Directional Signaling
The MPRe-112-SS incorporates integrated lane indicators that signal dynamic passage status and operational direction to approaching users. Contactless bidirectional transit is regulated by a built-in photoelectric sensor array:
- Optical User Tracking: Photoelectric switches detect pedestrian approach to trigger contactless wing retraction in 0.3 seconds (with PU foam wings) or 0.35 seconds (with acrylic glass wings).
- Security Violation Monitoring: The sensor array continuously identifies unauthorized access attempts, tailgating (following behind an authorized person), and wrong-way entry, triggering local acoustic or electronic alarm signals.
- Obstacle Sensing: Sensitive impact detection combined with fireproof PU foam-coated aluminium or acrylic glass barrier elements ensures compliance with pedestrian safety protocols.
Environmental and Structural Specifications
| Parameter | Compatibility Specification |
|---|---|
| Mains Supply Voltage | 110 – 240 VAC, 50/60 Hz |
| Maximum Power Consumption | 35 W |
| Aisle / Passage Width | 520 mm |
| Cabinet Dimensions (L x W x H) | 1300 x 250 x 1035 mm |
| Operating Temperature Range | 0 °C to +45 °C |
| Ingress Protection Class | IP 32 |
| Housing Material | Stainless steel V2A with glass top (optional chrome-plated steel) |
| Duty Cycle Rating | 100% continuous duty (rated for 10 million cycles) |