Access Control System Interfacing
The Magnetic MPP 222 motorized tripod turnstile is engineered for seamless integration across diverse physical security infrastructures and is fully compatible with all major access control systems. Central to its connectivity is the integrated MGC control system, which provides an extensive input/output terminal array consisting of 8 digital inputs, 4 digital outputs, and 6 relay outputs. This comprehensive hardware interface allows security system integrators to wire standard credential validation systems, token acceptors, and third-party readers directly into the controller without requiring external conversion hardware.
The unit can be operated in uni-directional or bi-directional passage configurations depending on the signaling provided by the connected access control hardware. Integrators can assign specific digital inputs to grant passage authorization for entry, exit, or controlled two-way flow. The integrated MGC relay outputs and digital outputs provide real-time status signals back to host controllers, annunciator panels, or building management systems to report passage completions, lane status, and rotation cycles.
Life Safety and Emergency System Integration
Emergency release capabilities are built directly into the MPP 222 architecture to ensure full alignment with building life safety regulations. The turnstile is equipped with dedicated emergency release inputs configured to release the rotating barrier arms immediately upon the closing of alarm contacts from an external fire alarm control panel (FACP) or centralized emergency override switch. During an active emergency signal, the barrier permits free pedestrian rotation to facilitate rapid perimeter egress.
In the event of a total site power outage, the turnstile automatically defaults to an emergency release state to avoid entrapment and maintain unrestricted egress. For facilities requiring an entirely unobstructed evacuation corridor during emergencies, the MPP 222 is also compatible with an optional drop-arm mechanism. When triggered by a fire alarm contact closure or power loss, this drop-arm feature collapses the horizontal barrier arm downward to establish completely clear passage through the 515 mm lane.
Network Connectivity and Controller Ecosystem
For IP-based access management and automated facility networks, the turnstile can be configured with an optional Ethernet module. This hardware expansion enables direct IP-based connectivity, allowing facility supervisors to monitor the unit across local network topologies. Commissioning and operational adjustments do not require external configuration tools; the integrated MGC controller includes an onboard graphic display that enables technicians to configure all parameters directly at the turnstile without requiring a laptop or special adapter cables.
The internal MGC control system incorporates event logging, error logging, and continuous throughput data acquisition as standard operational functions. Furthermore, because the MPP 222 shares the exact same MGC control system architecture utilized across Magnetic vehicle barriers, enterprise sites can establish commonality across both pedestrian turnstiles and vehicle barrier gates. This architectural uniformity significantly minimizes spare parts diversity and reduces technical training demands for integration personnel across multi-gate facilities.
Electrical Supply and Interface Summary
The MPP 222 integrates into standard international electrical supplies, accepting a wide voltage range of 100 – 240 VAC at 50/60 Hz while maintaining low power consumption rated at a maximum of 30 W. Designed for outdoor perimeter deployment, the IP 44-rated enclosure operates reliably in ambient environments ranging from −30 °C to +55 °C.
| System Interface / Feature | Compatibility and Integration Specification |
|---|
| Access Control Compatibility | Fully compatible with all major third-party access control platforms |
| Digital Inputs | 8 assignable digital inputs on integrated MGC controller |
| Digital Outputs | 4 assignable digital outputs for status signaling |
| Relay Outputs | 6 relay outputs for feedback reporting and peripheral switching |
| Passage Modes | Supports independent uni-directional or bi-directional passage control |
| Emergency Alarm Integration | Free passage triggered by closing of external alarm contacts |
| Power Failure Behavior | Failsafe free passage release; optional drop-arm mechanism support |
| Network Options | Optional Ethernet module for IP-based network connectivity |
| Controller Commonality | Identical MGC architecture as Magnetic vehicle barrier platforms |
| Electrical Requirements | 100 – 240 VAC, 50/60 Hz; maximum power consumption 30 W |
8347888384
_small.jpg)
