Answer:
The DI-9101E is compatible with GST addressable panels including the GST100, GST200N, GST-IFP4E, and GST-IFP8. It mounts on the GST DB-01 standard base (terminals 1 & 3 for non-polarized loop wiring) or DC-9504E diode base, interfaces with the C-9314P remote indicator, and is addressed electronically (1 to 242) using the P-9910B handheld programmer.
The GST DI-9101E is an addressable system component designed specifically for integration within GST intelligent fire networks:
- Compatible Control Panels: GST100, GST200N, GST-IFP4E, and GST-IFP8 Intelligent Fire Alarm Control Panels.
- Mounting Bases: Mounts directly onto the standard GST DB-01 base (Product No. 30205764) or the DC-9504E Diode Base (Product No. 10105103). The DB-01 base fits standard European embedded back boxes with mounting hole centers between 45 mm and 75 mm.
- Base Terminal Wiring: Terminals 1 and 3 accommodate loop in/out wiring (polarity-insensitive / non-polarized). Terminal 2 connects to the positive lead and Terminal 4 connects to the negative lead of an external C-9314P Remote Indicator (Product No. 10102339).
- Cabling Requirements: Recommended minimum 1.0 mm² or higher fire-resistant cable installed through metal or flame-retardant conduit, observing local wiring regulations.
- Addressing & Configuration: Uses soft electronic addressing via the GST P-9910B Handheld Programmer (Product No. 10104894) with an address allocation range of 1 to 242. Sensitivity (Level 1 or 2) and polling LED state (active or closed) are configured via the same handheld programmer.
