Answer:
The bollard operates via the dedicated FAAC JE275 electronic control board (part 116300) and is housed within the J355 foundation pit (part 116130). It supports multi-unit Master/Slave synchronization, the FAAC J355 manual release kit (part 116102), the JH275/J355 pit heater (part 116203), and optional Emergency Fast Operation (EFO) circuits.
The FAAC J355 HA M50 is designed to integrate into high-security perimeter architectures using dedicated OEM controllers and site accessories:
- Control Board: Dedicated control is managed by the FAAC JE275 electronic control unit (part number 116300). One JE275 board operates 1 J355 HA bollard.
- Multi-Lane Synchronization: For multi-bollard roadway checkpoints, multiple JE275 control units can be interconnected in a Master/Slave configuration to synchronize simultaneous rising and lowering commands across multiple lanes.
- Foundation Pit: Installs into the pre-fabricated J355 M50 HA foundation pit (part number 116130), requiring reinforced concrete excavation dimensions of approximately 3,100 mm (L) × 1,600 mm (W) × 1,850 mm (D).
- Emergency Fast Operation (EFO): Compatible with an optional EFO hydraulic accumulator kit that accelerates the emergency ascent time from 6 seconds down to approximately 2 seconds during active threat alerts.
- Auxiliary Kits: Compatible with the FAAC J355 manual release kit (part number 116102) for physical lowering during power loss and the JH275/J355 pit heater (part number 116203) to extend cold-weather deployment down to -40 °C.
