Physical Mounting and Environmental Placement
The eSSL X990 standalone terminal is engineered for wall-mounted physical installations across commercial and industrial access control checkpoints. The unit features external dimensions of 210 mm in length, 157 mm in width, and 40 mm in depth. Installation requires mounting the unit directly onto a stable, flat vertical wall using the provided mounting backplate.
Installers must verify that the deployment location complies with the specified operational limits: an ambient operating temperature between 0°C and 45°C and an operating relative humidity between 20% and 80%. Avoid mounting locations exposed to extreme moisture, direct outdoor precipitation, or uncontrolled thermal variations that exceed these environmental parameters.
Power Supply Requirements
Power integration requires an external DC 12V regulated power source delivering a continuous supply current of 1.5A connected to the dedicated power terminal inputs. Where deployments utilize the factory hardware option for internal battery backup (they are not included), verify external power line stability before commissioning. Stable supply voltage is critical to ensure proper function of the 32-bit microprocessor, the 3-inch Color TFT display, the 500 DPI optical sensor, and onboard relay switching.
Access Control Relay and Lock Hardware Wiring
The eSSL X990 features an onboard 12V relay interface designed to actuate standard industrial door locking hardware. The terminal terminals support direct integration with the following door control peripherals:
- Electric Locking Devices: Connects to 12V electromagnetic (EM) locks, drop bolt locks, or strike locks via the relay output circuits.
- Egress Devices: Dedicated terminals connect conventional push-to-exit buttons or No-Touch contactless exit sensors.
- Monitoring Sensors: Onboard door sensor inputs monitor door open/closed status to support door forced or door held alarms.
- Safety and Signaling: Features dedicated terminals for fire alarm trigger input integration (enabling automatic fail-safe release upon an emergency signal) and door bell integration.
Peripheral Readers and Wiegand Multi-Door Controller Interfacing
To implement bidirectional access control or slave reader entry/exit setups, the terminal includes dedicated reader interfaces and Wiegand data ports. The device supports Wiegand In and Wiegand Out communication, configurable in 26-bit and 34-bit formats (with or without site code transmission), facilitating direct integration into third-party multi-door access controllers.
For dual-verification ingress/egress points, the terminal connects to compatible auxiliary exit readers, including the FR 1200 biometric slave reader, 101 HE, KR500, KR503 RFID readers, and no-touch exit sensors. The unit also supports optional peripheral integration with external speaker outputs, external notification bulbs, and direct external serial or network printers.
Network Configuration and Communication Setup
Commissioning the eSSL X990 within a central network infrastructure is achieved via the onboard RJ45 Ethernet port using TCP/IP network protocol. The firmware's push data capability supports automated record transmission across local area networks or wide area networks directed toward either a static IP address or a fully qualified domain server.
For standalone environments lacking structured Ethernet cabling, log transactions (up to 100,000 records) and template databases (up to 10,000 fingerprint templates and 10,000 RFID cards) can be synchronized offline using the integrated USB host/client interface with a standard USB flash memory drive.