Back to Product
Compatibility

Hardware Interfaces and Peripheral Compatibility

The eSSL X7 standalone biometric access control terminal is engineered with standardized onboard terminal interfaces to support direct integration with standard low-voltage door hardware and security peripherals. Operating as an independent access control unit without requiring an external host PC or network controller, the terminal coordinates locking mechanisms, exit inputs, and signaling devices through dedicated physical terminal blocks.

Electric Lock and Hardware Integration

The device provides relay output terminals designed to switch power to third-party electric locking mechanisms. It integrates with standard commercial and industrial locking hardware, including:

  • Electromagnetic Locks (EM Locks): Compatible with standard fail-safe magnetic locks across various holding forces wired through the terminal relay output.
  • Electric Drop Bolt Locks: Compatible with fail-safe or fail-secure electric bolt mechanisms mounted on single-swing or double-swing doors.
  • Electric Strike Locks: Compatible with fail-secure or fail-safe rim or mortise electric strikes installed in timber, aluminum, or metal door frames.

Input and Sensor Interface Compatibility

The eSSL X7 provides dedicated input channels to interface with field sensors and manual release controls:

  • Exit Request Buttons: Directly compatible with standard push-to-exit buttons and push plates utilizing momentary normally-open (NO) contact circuits, allowing egress without biometric verification.
  • Door Position Sensors: Interfaces with external normally-open (NO) or normally-closed (NC) magnetic reed switches and door contacts to track physical door open/ajar conditions.
  • Alarm Indicators: Features an integrated alarm output interface compatible with third-party local alarm buzzers, strobes, or sounders to signal door forced or tamper conditions.
  • External Doorbell: Includes dedicated terminal outputs to trigger standard external wired doorbells when visitors actuate the unit calling interface.

Credential and Identification Interoperability

The terminal features an onboard optical sensor running the Finger V10.0 biometric algorithm alongside an embedded card reader and keypad. It supports authentication across distinct credential standards:

  • RFID Card Technology: Supports standard 125 kHz RFID proximity cards with storage for up to 500 unique card identities.
  • Fingerprint Biometrics: Accommodates up to 500 biometric fingerprint templates using an optical platen operating at FAR ≤ 0.0001% and FRR ≤ 1%.
  • PIN Access: Stores up to 8 password groups for numeric keypad verification.
  • Multi-Factor Authentication Modes: Fully compatible with multi-verification policies including fingerprint only, card only, password only, password + fingerprint, and password + card.

Power and Operating Specifications

The unit requires a 12V DC power input rated at 3A to support internal processing logic, optical scanning, RFID reading, and peripheral relay driving. It operates reliably within ambient temperature limits of 0°C to 40°C and relative humidity levels between 20% and 80% (non-condensing).

Hardware Interface Compatibility Matrix

Subsystem / PeripheralInterface TypeCompatibility Standard / Support
Electric Locking HardwareRelay OutputEM locks, electric bolt locks, electric strikes
Egress ControlDigital InputMomentary push-to-exit buttons / push switches
Door MonitoringSensor InputMagnetic door position contacts (NO/NC)
Local AnnunciationSignal OutputWired external doorbell units
Tamper / Forced AlarmAuxiliary OutputExternal alarm sounders and buzzers
RFID Proximity MediaIntegrated RF Reader125 kHz proximity cards (500 card capacity)
Biometric CaptureIntegrated Optical SensorFinger V10.0 algorithm (500 template capacity)
Operating PowerDirect DC Terminal12V DC ± regulation, 3A current capacity