Back to Product
Compatibility

eSSL VEGA+W+POE Hardware, Network, and System Compatibility

Network and Power Infrastructure Compatibility

The eSSL VEGA+W+POE integrates into standard commercial and industrial IT backbones using standard communication and power protocols. Network power sourcing conforms to the IEEE 802.3 Power over Ethernet (PoE) standard, allowing the unit to receive operating power and network data across a single Cat5e/Cat6 network cable connected to an IEEE 802.3-compliant PoE switch or injector. For sites utilizing dedicated power distribution panels, the terminal also includes direct compatibility with an external DC 12V, 1.5A power feed.

For network data transmission and administrative communication, the embedded Linux system supports both wired and wireless infrastructure. The device connects over local area networks using wired TCP/IP Ethernet lines or wirelessly via integrated Wi-Fi connectivity, allowing flexible placement in industrial facilities without dedicated data drops.

Credential and Reader Compatibility

The unit supports physical credential verification through dedicated internal reader hardware and keypad entry:

  • Proximity Cards: Standard factory-equipped RF receiver operates at 125 kHz for standard proximity access cards.
  • Mifare Smart Cards: An optional factory-configured 13.56 MHz Mifare reader variant is available for facilities operating on high-frequency RFID credential platforms.
  • Keypad Passwords: The physical 17-key tactile keypad accepts user-defined PIN codes between 6 and 8 digits in length.
  • Biometrics: Standalone 1:N biometric matching architecture supports up to 3,000 fingerprint templates with authentication speeds under 0.5 seconds.

Access Control Peripheral Wiring Compatibility

The VEGA+W+POE terminal features onboard terminal interfaces designed to connect directly to standard access control door accessories without requiring intermediate relay modules:

  • Locking Devices: Terminals directly interface with electromagnetic locks (EM locks) and electric strikes/locks.
  • Door Monitoring: Onboard door sensor inputs monitor door open/closed contact status.
  • Egress Hardware: Dedicated input terminals accept standard push-to-exit buttons.
  • Auxiliary Output: An integrated alarm output relay interfaces with external alerting circuits or security monitoring panels.

Wiegand Controller and Panel Interoperability

The device features a field-configurable Wiegand interface that can be set to either Wiegand Input or Wiegand Output mode. When configured as Wiegand Output, the terminal functions as a peripheral reader, transferring authenticated card or fingerprint transactions to third-party access control controllers or master multi-door panels. When configured as Wiegand Input, the terminal connects to an external slave proximity or biometric reader to govern two-way door control.

Serial Bus and Local Transfer Interfaces

In addition to IP-based networking, the terminal provides serial RS485 communication lines for multi-drop serial bus deployments. For standalone installations or locations where network connectivity is restricted, an integrated USB host interface permits flash drive data transfers to export transaction logs (up to 200,000 logs stored in onboard memory) or upload user database records directly to the terminal's 256 MB ROM and 128 MB RAM architecture.

Interface and System Specifications

Interface CategoryCompatible Specification / Protocol
Power SupplyIEEE 802.3 compliant PoE / DC 12V, 1.5A external input
Network CommunicationTCP/IP Ethernet, Wi-Fi
Serial & Local DataRS485, USB Host
Wiegand PortConfigurable Wiegand (Input or Output)
Door Control I/OElectric Lock / Electro Magnetic Lock, Door Sensor, Exit Button, Alarm Output
RFID Frequencies125 kHz Proximity (Standard); 13.56 MHz Mifare (Optional)
Credential Capacity3,000 Users, 3,000 Fingerprint Templates, 3,000 Cards