Mechanical Mounting & Environmental Parameters
The eSSL uFace302 terminal has physical dimensions of 193.6 mm (L) x 165.2 mm (W) x 86 mm (T) with a packaged shipping weight of 1.6 kg. During physical positioning, ensure the terminal is wall-mounted at an ergonomic height that allows users convenient interaction with the 4.3-inch touch screen and provides an unobstructed field of view for the dual optical and infrared facial imaging sensors.
The unit is designed to operate reliably within an ambient temperature range of 0 °C to 45 °C and a non-condensing relative humidity envelope between 20% and 80%. When planning the installation location in commercial, industrial, or educational facilities, position the hardware to avoid direct exposure to extreme climatic conditions outside these rated operational parameters.
Power Supply Configuration
The system requires a regulated power input of 12V DC at 3A. Ensure dedicated DC power cabling with appropriate gauge sizing is deployed between the power source and the terminal to avoid voltage drops over extended distances. For uninterrupted operation during grid outages, the unit supports an optional internal 2000 mAh backup battery (they are not included). If battery backup operation is selected, verify that the terminal is disconnected from active mains power prior to mounting or servicing the optional 2000 mAh backup battery (they are not included).
Access Control Peripheral Interface Wiring
The terminal integrates onboard input and output interfaces for physical security integration. Terminals are provided for connection to third-party electric locks, dry-contact door sensors, egress exit push buttons, external alarms, and secondary host controllers via Wiegand signal output lines.
| Subsystem / Interface | Terminal Pinout / Wire Designation | Functional Purpose |
|---|---|---|
| Electric Lock Interface | NO1, COM1, NC1 | Relay dry-contact connections for fail-safe (NC) or fail-secure (NO) third-party electric locks. |
| Door Status Sensor | SEN, GND | Monitors physical door position to trigger local forced-door or door-held-open alarms. |
| Request to Exit (RTE) | BUT, GND | Connects momentary dry-contact exit push buttons for internal manual egress. |
| Wiegand Output | WD0, WD1, SGND | Transmits verified credential data to an upstream third-party access control panel. |
| Serial Communication | +485, -485, GND | RS485 differential serial loop for peripheral slave reader integration. |
| Direct DC Input | 12V, GND | Accepts regulated 12V DC, 3A electrical input from external power supplies. |
Network and Communication Integration
The uFace302 incorporates a standard TCP/IP Ethernet interface for high-speed local area network deployment. Route structured CAT5e or CAT6 Ethernet cabling to the terminal location to facilitate direct communication with attendance management servers such as eTimeTrackLite. The terminal features embedded Push Data firmware capabilities, enabling automatic real-time transaction synchronization to central database servers.
For standalone, remote, or temporary sites lacking structured network cabling, administrators can utilize the integrated USB Host port to extract access transactions and manage credential templates via a USB drive. If site specifications call for wireless or serial data transport, the terminal platform also accommodates RS232/485 serial communication lines, as well as optional Wi-Fi or 3G expansion hardware configurations.