The eSSL uFace302 multi-biometric attendance and access control terminal (KT Ref: KTI01002003UFAC) is engineered to interface directly with industrial security hardware, structured corporate data networks, and centralized security controllers. It features hardware relay outputs, serial connections, and network protocols to integrate into both standalone door environments and distributed enterprise topologies.
Access Control Hardware and Peripheral Interfacing
The terminal features physical terminal block connections designed to operate with standard low-voltage door access hardware:
- Electric Locking Hardware: Relay output contacts (NO1, COM1, NC1) allow connection to third-party electric strikes, electromagnetic locks, and drop bolts.
- Egress and Monitoring Sensors: Terminals for exit push buttons (BUT, GND) and door status sensors (SEN, GND) support local egress integration and physical door monitoring.
- Alarm Annunciation: Dedicated alarm relay interfaces allow the unit to trigger external signaling devices during tamper or forced-door events.
- Third-Party Access Panels: An integrated Wiegand signal output (WD0, WD1, SGND) transmits verified credential data directly to external third-party access control panels and controllers.
Network and Data Communication Compatibility
The uFace302 supports multiple data communication standards for synchronization with centralized management databases:
- Local Area Network (TCP/IP): Connects directly to Ethernet network switches and routers for high-speed local data management and template transfer.
- Serial Protocols (RS232/RS485): Dual serial interfaces enable direct PC communication over RS232 or bus integration via RS485 (+485, -485, GND) to link peripheral controllers or slave readers.
- USB Host Interface: A standard USB port allows manual offline retrieval of transaction logs and template uploading via USB flash drives when network cabling is unavailable.
- Push Data Protocol: Native support for Push Data architecture ensures automatic, real-time transaction forwarding to central cloud or on-premise attendance software platforms like eTimeTrackLite.
- Optional Connectivity: Hardware expansion options accommodate Wi-Fi modules and 3G cellular modems for remote installations without Ethernet infrastructure.
Credential and Identification Interfacing
The terminal features an integrated RFID card reader supporting standard 125 kHz ID cards, with optional support for 13.56 MHz Mifare smart cards. The unit stores up to 10,000 cards, 4,000 fingerprint templates, and 3,000 face templates (compatible with both 1:N and 1:1 matching modes), providing flexibility across varied user identification requirements.
Electrical Power Compatibility
Operational power is provided via an external regulated 12V DC, 3A power supply. In facilities requiring operational continuity during power outages, the unit supports an optional internal 2000 mAh backup battery (they are not included).