The Autozon AZSW112B heavy-duty electromechanical linear swing gate operator is designed for modular integration within standardized vehicular automation systems. Interfacing relies on the dedicated Autozon ICON - AZSW112B operator controller, which bridges mains input power, low-voltage motor drives, safety circuits, and external command accessories.
Gate Structure and Mechanical Leaf Compatibility
Mechanical compatibility requires swing gate leaves matching the physical kinematic ratings of the AZSW112B operator arm. The electromechanical screw drive supports single-leaf configurations up to 400 kg in weight and 4 m in width. For dual-leaf swing gates, the system accommodates configurations up to 400 kg + 400 kg across total span widths up to 4 m + 4 m.
The internal drive provides a maximum piston stroke of 400 mm, accommodating installation geometries requiring gate leaf opening angles up to 120°. Mechanical limit switches configured with a 1:1 setup ratio integrate directly with standard gate hinge pillars and structural gate leaves for exact travel calibration.
Primary Power and Controller Interfacing
The system requires an electrical power supply input of 220 V to 240 V AC at the primary controller terminal. The paired ICON - AZSW112B control unit converts and regulates power for the 24 V DC planetary-geared operator motors, supporting up to 200 W x 2 nos for dual-arm installations. The logic board features onboard interface terminals for potential-free relay contacts, allowing clean command interfacing with push buttons and external automation relays.
Radio Frequency and Wireless Accessories
Wireless command compatibility is established via the onboard receiver system paired with Autozon AZT23B wireless handheld transmitters. The control system features an onboard memory capacity capable of registering up to 100 remote units. System reception provides an effective transmitter working range of up to 30 m (≤ 30 m) under typical site line-of-sight conditions.
Safety Sensor and Detection Device Compatibility
Dedicated safety input loops on the ICON - AZSW112B controller board interface directly with active presence-detection and optical obstruction hardware. Compatible safety equipment includes:
- Photocell Sensors: Autozon AZPC10A standard photocell sensors.
- Infrared Beams: Autozon AZIS6F20 and AZIS4F20 active infrared beam sensors.
- Laser Detection: Autozon AZLPC12A laser photocell units.
- Safety Edge Kits: Autozon AZSLGSE332 and AZSLGSE333 pressure-sensitive safety edge assemblies.
- Visual Indicators: Autozon AZFL19 flashing warning lamp for operating state alerts.
Access Control, Smart Modules, and Auxiliary Hardware
The control interface accommodates various digital and electromechanical peripheral access components:
- Key Switch: Autozon AZKS15 external rotary key switch.
- Biometric & Keypad Terminals: Autozon AZPFAC52 inside-opening fingerprint and numeric password keypad terminal.
- Proximity Identification: Autozon AZST518 and AZSR519 IP68 smart tag and active receiver modules.
- Auxiliary Locking: Autozon AZELBL32A electric bottom lock for supplementary mechanical leaf deadlocking.
- Smart Wireless Communication: Autozon AZWIFI31B Wi-Fi module for local network interfacing.
- Cellular Automation: Autozon AZGSM30 GSM module featuring a DC 9–24 V power relay output (NO/COM/NC) to manage gate triggering via authorized incoming phone calls.
- External Access Readers: Compatible with industry-standard dry-contact input devices, including face recognition terminals, RFID readers, and QR code scanners.
- Auxiliary Power: Compatible with external battery backup cells (they are not included) to maintain system functionality during mains power interruptions.