Access Automation and Boom Barrier Controller Compatibility
The KTI 300 MM Dia 2-in-1 Red Cross & Green Up-Arrow Traffic Light (SKU: KTI16022900TTRG) is engineered for direct electrical integration with commercial and industrial automatic boom barrier controllers. Designed with a 2-in-1 dual indication format inside a single 300 mm optical aspect, the unit interfaces seamlessly with standard boom barrier auxiliary relay outputs. As access control systems trigger lane open or barrier close commands, the internal ultra-bright LED circuits switch between the Red Cross stop indication and the Green upside (upward) arrow pass indication via switched 230V AC power feeds.
Because the unit operates directly on a 230V AC power supply, it eliminates the requirement for auxiliary step-down power converters when paired with 230V AC rated access gate controllers. Facility integration teams can wire the switched phase inputs directly into corporate gate barriers, toll barrier units, and perimeter vehicle access control lanes.
Industrial PLC and Traffic Control Management System Integration
For automated vehicle routing across industrial sites, logistics yards, and plant perimeters, the KTI16022900TTRG integrates directly with programmable logic controller (PLC) relay modules and standard 230V AC traffic control management systems. The dual-symbol display allows automated control software to alternate between lane permission and lane restriction states using standard 230V AC switched relay terminals.
The unit's 3 kg structural footprint, UV-stabilized water-clear polycarbonate lens, molded polycarbonate housing body, and High-Density Polyethylene (HDPE) front hood ensure dependable mechanical and environmental performance when deployed alongside overhead lane gantries, plant weighbridges, multi-level parking ramps, and toll plaza overhead canopies.
System Compatibility Matrix
| System Architecture / Interface | Compatibility Status | Integration & Operational Details |
|---|---|---|
| Automatic Boom Barrier Systems | Fully Compatible | Direct connection to 230V AC barrier relay outputs for coordinated barrier arm up/down lane signaling. |
| Industrial PLC Relay Modules | Fully Compatible | Switched 230V AC line outputs command alternating Red Cross and Green Upward Arrow LED indicators. |
| Traffic Control Management Systems | Fully Compatible | Integrates into plant-wide or municipal 230V AC traffic controller field terminal blocks. |
| Toll Plaza Overhead Lane Canopies | Fully Compatible | Provides 300 mm overhead visual status (Red Cross / Green Arrow) integrated with toll lane logic. |
| Multi-Level Parking Management Systems | Fully Compatible | Interfaces with ramp control systems and corporate gate access control relay triggers for lane management. |
Electrical Integration Considerations
When connecting the traffic light to automated control hardware, installers must route 230V AC switched lines to the designated internal terminals for the Red Cross and Green upward arrow respectively. Direct interface with dry-contact relay modules requires an external 230V AC line feed routed through the controller's normally open (NO) contacts to prevent incorrect switching or dual illumination. The housing body, front HDPE sun visor hood, and water-clear polycarbonate lens interface reliably in extreme weather conditions across corporate, municipal, and industrial automation networks.
