Site Planning and Physical Footprint Requirements
Proper site preparation ensures seamless deployment and long-term operating reliability for the ZKTeco ZKX5030C X-ray inspection system. The unit is delivered in shipping packaging measuring 1970 mm (L) × 1020 mm (W) × 1420 mm (H) with a gross shipping weight of approximately 450 kg (net unit weight is 400 kg). Ensure that all access corridors, freight elevators, and transit doorways have sufficient clearance to accommodate these packaged dimensions before moving the equipment to the checkpoint floor.
The installation footprint must accommodate the core chassis and provide unobstructed clearance for luggage infeed and outfeed zones. The inspection tunnel dimensions are 507 mm (W) x 305 mm (H), and the conveyor belt operates at a transmission height of 710 mm (nominal height range 650 mm to 730 mm when adjusted via the chassis leveling feet). The surrounding flooring must be flat, rigid, and rated to support the 400 kg static load plus maximum distributed dynamic conveyor loads of ≥150 kg.
Electrical Supply and Earthing Specifications
The ZKX5030C operates with an energy-efficient power profile drawing a standard operational power consumption of 0.6 kVA (rated up to 1.0 kVA peak). A dedicated, noise-filtered single-phase AC utility feed is recommended to ensure continuous operation of the 140 kV (0.3 mA) X-ray generator assembly. Proper low-impedance electrical grounding is mandatory to maintain stable imaging performance, eliminate high-frequency interference, and support the internal sealed oil bath forced-air cooling system.
Network Cabling and Display Console Assembly
The system workstation includes a 17-inch LED display monitor and a dedicated operator control keyboard. Complete the operator interface setup through the following connections:
- Mount the 17-inch LED monitor securely on the designated operator console bracket or adjacent workstation desk.
- Connect the standard RJ45 (TCP/IP) ethernet interface between the scanner chassis and the facility's local network or dedicated security management host running ZKBio SIS software.
- Secure all power, video, and peripheral cabling within protective trunking to avoid interference or physical damage in high-traffic screening lanes.
Safety Verification and Initial Commissioning
Before initiating live checkpoint screening, complete mandatory radiation safety inspections and functional diagnostic checks:
- Lead Curtain Inspection: Verify that the integrated lead shielding curtains at both the tunnel entry and exit ports hang freely, overlap fully, and exhibit no gaps or mechanical obstruction.
- Radiation Dosage Verification: Confirm that external radiation leakage remains within the certified threshold of
