Installation and Mounting Guide for ZKTeco KJZ-03 Stand

The ZKTeco KJZ-03 (manufacturer part number A80072766, internal reference KTI02008004KJZ03) is a heavy-duty vertical mounting stand designed to integrate facial recognition access control terminals directly onto pedestrian turnstiles, flap barriers, optical gates, and speed gates. Engineered from durable steel with a 414 mm height profile, this stand provides a stable, rigid platform for access control integration without requiring standalone floor pedestals.

Turnstile and Gate Top Housing Mounting

The KJZ-03 is specifically built for direct gate housing attachment (lathe and barrier integration). Direct mounting on top of turnstile chassis ensures that biometric readers are positioned at an optimal angle and height for oncoming pedestrian traffic. The structural steel build handles the mechanical vibration and continuous movement common to high-throughput pedestrian speed gates in both indoor and outdoor operational environments.

Fastening Requirements and Hardware Specification

Secure mechanical integration requires a dedicated 4-piece screw set, designated under ZKTeco part number A18010101. Installers must ensure that the proper fastener package is utilized during field deployment:

• Fastener Requirement: 4-piece screw kit (Part Number: A18010101).
• Mounting Alignment: Vertical base mounting onto turnstile or flap barrier top surface.
• Material Construction: High-strength steel designed for rigid load support.
• Environmental Deployment: Engineered for both indoor and outdoor access control installations.

Biometric Terminal Mechanical Attachment

The KJZ-03 vertical stand is engineered to interface directly with ZKTeco facial recognition terminals. The mounting interface accommodates the backplate and chassis configurations of the following biometric hardware models:

• ZKTeco ProFace X and ProFace X [CH] (Channel version)
• ZKTeco SpeedFace-V5L and SpeedFace-V5L [CH] (Channel version)
• ZKTeco SpeedFace-V4L (ZK-SPEEDFACE-V4L)

Route all device power, Ethernet, and relay wiring through the vertical stand column directly into the turnstile or barrier housing for protected internal wire management before tightening the terminal mounting hardware.

Site Height Adaptation and Modular Extension

When field conditions, pedestrian lane geometry, or specific barrier profiles require additional elevation, the standard 414 mm height can be adjusted. If the length of the bracket does not match the actual physical installation environment during deployment, installers can integrate the dedicated modular extension:

• Extension Accessory: KJZ-03 Extension Bar
• Accessory Part Number: A13130130
• Application: Extends bracket elevation for non-standard pedestrian clearance or tall turnstile gate profiles.

Technical Installation Summary