Access Control and Reader Integration
The ZKTeco FBL300 single lane flap barrier turnstile entrance control system (KT reference: KTI02008004FB30) is engineered for flexible integration with industrial and commercial access management architectures. The system is designed to interface with authentication devices based on facility requirements, natively supporting integration with RFID card readers and biometric fingerprint access control readers. The ergonomic housing design allows smooth alignment and integration of card and fingerprint verification hardware, streamlining credential processing to achieve throughput rates of up to 35 people per minute.
System configuration, calibration, and parameter adjustments are handled directly through the built-in flap barrier control board, which features an integrated LCD display. This onboard interface simplifies operational setup and diagnostics when integrating the barrier mechanism with field authentication systems.
Electrical and Power Supply Compatibility
The FBL300 flap barrier is compatible with standard global commercial and industrial electrical mains, accepting wide-range AC power inputs:
- Operating Voltage: AC 100V to 120V and AC 200V to 240V
- Frequency Compatibility: 50/60 Hz single-phase AC supply
- Power Outage Fail-Safe: Compatible with backup battery (they are not included) integration. When an auxiliary battery (they are not included) is connected, the retracting acrylic barriers automatically retract during power outages to maintain continuous egress.
Safety, Sensor, and Emergency System Interfacing
Designed for medium-security pedestrian entrance control, the FBL300 incorporates extensive safety and monitoring hardware. The chassis comes equipped with 5 pairs of infrared sensors distributed along the passage zone to enable real-time passage detection, anti-tailgating surveillance, and passenger pinch protection. In addition, the turnstile supports integrated LED status indicators to visually guide pedestrian flow and interfaces directly with emergency mode triggers to retract the acrylic barrier flaps instantly during emergency scenarios.
Architectural, Spatial, and Environmental Specifications
Physical integration into security checkpoints, lobbies, and access corridors requires verification of the following spatial and operational parameters:
| Deployment Parameter | Specification |
|---|---|
| Casework Dimensions (L × W × H) | 1400 mm × 300 mm × 980 mm |
| Clear Lane Width | 570 mm |
| Total Unit Weight | 70 kg |
| Construction Materials | SUS304 stainless steel casework, steel lid, acrylic barriers |
| Exterior Finish | All-smooth finish with no exposed screws |
| Mechanical Duty Rating | 2 million cycles MCBF (Mean Cycles Between Failures) |
| Operating Temperature | -20°C to 70°C |
| Operating Humidity | 5% to 95% (non-condensing) |
| Installation Environment | Indoor or sheltered outdoor pedestrian checkpoints |
| HSN / Customs Tariff Code | 86080090 |
.jpg)