Pre-Installation Site Assessment & Acoustic Coverage Planning
Proper acoustic positioning is critical to achieving the rated 2,500 to 3,000 sq ft (approximately 232 to 278 sq m) coverage area of the Telenet SS MON 136. High-frequency ultrasonic sound waves operating between 25,000 Hz and 65,000 Hz at 110 dB propagate via direct line of sight. Unlike low-frequency sound, ultrasonic pressure waves reflect off hard boundaries and will not penetrate solid barriers such as concrete walls, brickwork, heavy partitions, metal sheeting, or thick tree foliage.
Before mounting the unit, survey the industrial facility to map monkey access vectors, entry corridors, parapet walkways, structural rafters, and congregation zones. Identify an unobstructed central or perimeter location where the multi-directional surround-sound transducers can emit acoustic pressure directly into the target zone without physical interference.
Mounting Position and Physical Placement
The Telenet SS MON 136 is housed in a heavy-duty black fabricated mild steel (MS) metal enclosure measuring 17 inches x 17 inches x 6 inches. To optimize surround-sound dispersion across broad industrial areas, execute deployment using the following placement criteria:
- Elevated Mounting: Mount or position the unit at an elevated vantage point—such as facility columns, structural beams, high wall brackets, or terrace perimeters—facing downward and outward toward monkey entry routes and transit paths.
- Unimpeded Line of Sight: Ensure no structural pillars, stacked warehouse pallets, HVAC ductwork, or large machinery sit immediately in front of the transducer grilles, as localized acoustic shadowing will create dead zones.
- Application-Specific Placement: In switchyards, substations, communication tower platforms, and dish antenna stations, align the unit directly toward perimeter approach paths and cable tray runs to prevent animal intrusion.
Electrical Configuration and Power Connection
The system is engineered for plug-and-play corded electric deployment directly into standard commercial and industrial power infrastructures:
| Parameter | Specification / Requirement |
|---|---|
| Power Supply Requirement | 220 V AC, 50 Hz single-phase AC mains |
| Operating Configuration | Corded electric plug-and-play |
| Duty Cycle | Continuous 24/7 round-the-clock operation |
| Operating Frequency Band | 25 kHz to 65 kHz (auto-variable sweep) |
| Sound Pressure Output | 110 dB surround sound |
Connect the device to a dedicated, unswitched 220V AC, 50 Hz power socket. Continuous 24/7 energization is mandatory; if the electrical circuit is switched off, the high-pressure ultrasonic deterrent field collapses immediately, permitting pests to re-enter the protected perimeter.
Commissioning and Maintenance Protocol
Once connected to mains power, the SS MON 136 automatically initiates its variable frequency sweep from 25,000 Hz to 65,000 Hz. Because this frequency spectrum is above the range of human hearing, system activation requires confirming active electrical supply at the source outlet.
Routine post-installation maintenance involves periodic visual inspections to ensure the transducer grilles remain free of industrial dust accumulation, heavy particulate matter, grease, or exterior environmental debris that could mechanically dampen the 110 dB acoustic output.
