Pre-Installation Site Survey & Spatial Planning
Proper positioning of the Telenet MON 116 Ultrasonic Monkey Repeller is essential for maximizing its acoustic coverage footprint. The unit utilizes a dual-speaker configuration to disperse auto-variable high-frequency sound waves ranging from 25,000 Hz to 65,000 Hz at an output sound pressure of 90 dB. Ultrasonic acoustic waves travel via direct line-of-sight and reflect off hard surfaces rather than penetrating solid barriers, walls, or thick partitions.
Before physical mounting, map the monkey transit corridors, perimeters, and active entry points across your facility. A single MON 116 unit covers up to 800 sq. ft. in enclosed indoor environments and up to 600 sq. ft. in unobstructed outdoor or semi-indoor areas. For large-scale industrial spaces such as factory sheds, agricultural granaries, warehouses, and cold storage units, multiple units should be arranged to eliminate acoustic dead zones.
Mounting & Mechanical Positioning
The MON 116 is engineered in a compact black MS fabricated metal casing measuring 8" x 4" x 4" with a weight of 0.85 kg (850 g). The structural enclosure supports secure placement across various industrial structures, including structural pillars, wall brackets, rooftop parapets, loading bay gantries, communication towers, and dish antenna mounts.
- Direct Line-of-Sight Alignment: Direct the dual speakers toward targeted monkey pathways, perimeters, tree overhangs, or open entry doors. Avoid placing the device behind dense foliage, machinery, or pallets that could absorb or attenuate ultrasound waves.
- Elevation and Angling: Secure the unit at an elevated vantage point angled slightly downward toward the target zone to prevent ground-level signal blockage.
- Outdoor Deployment Precautions: While suitable for outdoor applications such as fruit farms, parking lots, gardens, and yards, outdoor installations must utilize protective overhead enclosures or weather canopies to shield the unit from direct heavy rainfall and moisture ingress.
Electrical Integration & Plug-and-Play Setup
The Telenet MON 116 features a standard Plug & Play architecture, minimizing commissioning downtime and eliminating complex control wiring:
- Power Supply Requirements: Connect the integrated power cord directly to a single-phase 220 VAC (200–240 V AC), 50 Hz electrical mains outlet.
- Continuous 24/7/365 Operation: The solid-state electronic architecture is designed for continuous, uninterrupted operation without duty-cycle interruptions. Ensure the connected circuit provides stable, uninterruptible mains power to maintain persistent deterrence.
Installation Specifications Matrix
| Parameter | Specification / Requirement |
|---|---|
| Input Electrical Supply | 220 VAC (200–240 V AC), 50 Hz |
| Speaker Configuration | Double Speaker (Dual Transducer) |
| Indoor Coverage Area | Up to 800 sq. ft. |
| Outdoor Coverage Area | Up to 600 sq. ft. (with protective enclosure) |
| Acoustic Output Pressure | 90 dB |
| Frequency Sweep Range | 25,000 Hz to 65,000 Hz (Auto-Variable) |
| Dimensions & Weight | 8" x 4" x 4" | 0.85 kg (850 g) |
| Enclosure Material & Finish | MS Fabricated Metal Casing / Black Finish |
| Compliance Standard | CE Certified |
Commissioning & Operational Verification
Once connected to mains power, the MON 116 immediately activates its automated variable frequency cycle. Because the 25,000 Hz to 65,000 Hz acoustic spectrum is above standard human hearing thresholds, confirm power delivery via the connected mains supply. No ongoing mechanical adjustments, calibration, chemical refills, or consumable replacements are required following physical installation.
.jpg)