Proper deployment of the Trust Safety Solutions 6550 (TSS-6550) X-ray baggage inspection system requires precise facility readiness, verified electrical supply characteristics, and structured commissioning procedures. Rated under HSN code 90221900 with KT reference KTI04023TS6550, the complete system package includes the primary scanner chassis, a dedicated inspection display monitor, an outfeed roller table, and an operational physical secure access key.
Spatial Requirements and Mechanical Positioning
Facility engineers must allocate sufficient floor area to accommodate the machine's external profile. The scanner chassis measures 2808.5 mm in length, 902 mm in width, and 1362.5 mm in height. In addition to the equipment footprint, clearance must be maintained at both the entry feed and discharge ends to permit unobstructed item handling through the 659.4 mm wide by 503.85 mm high inspection tunnel aperture.
The installation floor must provide structural support rated for the unit's static net weight of 420 kg, plus dynamic item loads. The integrated motor-driven conveyor system supports a maximum parcel payload of 150 kg distributed across the belt, which operates at a linear speed of 0.2 m/s. The supplied outfeed table must be mechanically aligned flush with the discharge aperture to ensure seamless transition for inspected baggage, parcels, and luggage.
Electrical Utility Specifications
The TSS-6550 operates from a single-phase AC power feed. Electrical connections must match the following factory supply parameters:
- Operating Voltage: 220VAC (acceptable tolerance range: ±10% to -15%)
- Line Frequency: 50 ± 3 Hz
- Power Consumption: 0.58 kW
- Leakage Current: ≤ 5.0 mA
A dedicated, noise-filtered power circuit with compliant protective earth grounding is necessary to maintain signal fidelity for the internal digital signal processor and ARM CPU computing core running the Linux operating system.
Environmental and Placement Criteria
The unit is engineered for indoor screening checkpoints across airports, rail terminals, subways, courtrooms, correctional facilities, stadiums, and logistics distribution hubs. Ambient site conditions must remain within the specified operational envelope:
- Operating Temperature: 5°C to 40°C
- Operating Relative Humidity: 0% to 90% (non-condensing)
- Storage Temperature Limits: -20°C to 60°C (10% to 90% humidity)
- Acoustic Profile: Ambient operating noise emission remains below 60 dB
- Radiation Shielding Boundary: External boundary leakage does not exceed ≤ 0.5 μGy/h, with an inspection cycle dose ≤ 2.0 μGy, ensuring safety for ASA/ISO 1600 photographic films
Commissioning and Initial Diagnostics
Once positioned, levelled, and connected to the electrical feed, mount and connect the included inspection display monitor to the visual output interface. Insert the secure access key to unlock the system power switch. Upon activation, the embedded Linux firmware executes an Automatic Built-in Test (BIT) and self-diagnosis routine, verifying the functionality of the ARM processor, detector arrays, conveyor drive mechanics, and radiation shielding circuits prior to active screening operations.
| Specification Metric | Installation Parameter |
|---|---|
| Overall Unit Dimensions (L × W × H) | 2808.5 mm × 902 mm × 1362.5 mm |
| Inspection Tunnel Dimensions (W × H) | 659.4 mm × 503.85 mm |
| Scanner Net Weight | 420 kg |
| Conveyor Belt Speed / Max Load | 0.2 m/s / 150 kg |
| Electrical Input Power | 220VAC (±10%-15%), 50±3Hz, 0.58 kW |
| Operating Ambient Limits | 5°C to 40°C / 0% to 90% humidity |
.png)