Mounting Options and Structural Requirements
The Hikvision DS-KH9510-WTE1(B) indoor station is engineered for indoor surface-mount installation on vertical interior walls. The physical chassis measures 254 mm in width, 166 mm in height, and 26.65 mm in depth (10.0" × 6.54" × 1.05"), with a bare unit weight of 875 g (gross packaging weight of 1060 g). When mounting the station, verify that the wall surface is flat, structurally stable, and capable of supporting at least four times the total equipment weight.
For desktop or control console deployments, the device is compatible with the optional DS-KABH9510-T table bracket stand. Installers must account for the rear-mounted mechanical tamper switch; the mounting bracket or flat installation surface must securely compress this switch to prevent false tamper alarms during operation.
Power Supply Requirements
The DS-KH9510-WTE1(B) supports two distinct power input topologies, maintaining a total system power consumption of ≤ 12 W:
- Standard Power over Ethernet (PoE): Power and network data can be delivered concurrently through the 10/100 Mbps RJ-45 interface via standard IEEE 802.3af network switches or injectors.
- Direct DC Power: The unit features dedicated 12 VDC terminal connection points designed for a regulated 12 VDC, 1 A power source. Hikvision optional power supply models DS-KAW50-1 and DS-KAW50-1N can be used to meet auxiliary power requirements.
Rear Terminal Block and Interface Wiring
The station provides comprehensive rear connection blocks to integrate local peripheral sensors, access control hardware, and serial equipment directly into the station:
| Interface Component | Specification / Rating | Functional Description |
|---|---|---|
| Network Interface | 1 RJ-45 10/100 Mbps self-adaptive | Ethernet connection supporting standard IEEE 802.3af PoE, TCP/IP, SIP, and RTSP streams |
| Alarm Inputs | 8 physical inputs | Supervised or dry contact zones for connecting intrusion detectors, door contacts, or emergency buttons |
| Alarm Output | 1 physical output | Relay output for triggering local strobe lights, auxiliary sirens, or automation relays |
| Lock Control Relay 1 | Max. 30 VDC, 0.3 A | Direct dry-contact relay for controlling low-voltage electronic door releases and access hardware |
| Level Control Relay 2 | High/Low level relay (3.3 V / 0 V) | Voltage-level signalling interface for integrated door controllers or logic circuits |
| Serial Communication | 1 RS-485 interface (Half-duplex) | Differential two-wire bus for legacy peripheral integration and industrial field devices |
| External Memory | 1 TF card slot | Supports standard MicroSD/TF memory cards up to 128 GB for local snapshot and video recording storage |
| Diagnostic Interfaces | microUSB and dedicated Debugging Port | Service, maintenance, and system debugging connections |
Network and Environmental Integration Parameters
When selecting the installation site, verify that environmental conditions remain within the operating temperature threshold of -10 °C to 50 °C (14 °F to 122 °F) and non-condensing relative humidity between 10% and 90%. Avoid positioning the 10.1-inch IPS capacitive touchscreen near high-intensity ambient light sources or vibrating industrial plant machinery.
Network routing must permit standard communication traffic over TCP/IP, SIP, and RTSP protocols. If utilizing wireless infrastructure instead of the primary wired RJ-45 port, the unit connects to standard 2.4 GHz Wi-Fi networks adhering to IEEE 802.11b, IEEE 802.11g, or IEEE 802.11n standards. Network planning should accommodate station capacity for up to 17 linked IP doorphones, 16 linked IP surveillance cameras, and up to 16 linked indoor extension stations across the local subnetwork.
_image_1.png)