Back to Product
Compatibility

GST S-9102R System Compatibility and Interface Specifications

The GST S-9102R Stand Alone Smoke Detector (Product No. 10105089) is engineered for autonomous smoke monitoring while offering integrated interface compatibility with third-party security systems, alarm panels, and auxiliary monitoring equipment. While the detector operates as an independent fire safety unit utilizing an optical chamber to monitor areas from 60 m² to 100 m² with an integrated sounder rated above 80dB at 3 meters (>80dB@3m), its built-in electrical contacts allow facility engineers to tie local detection events directly into wider building supervisory networks.

Interfacing with Third-Party Security and Alarm Panels

The primary integration interface of the GST S-9102R is its built-in volt-free, normally open (N/O) contact output. This output is photoelectrically isolated, ensuring complete electrical decoupling between the detector's internal 3VDC sensing logic and external connected circuitry. When an alarm threshold is crossed, the contact closes, allowing system integrators to send a discrete alarm signal to compatible security systems, annunciator panels, digital input modules, or auxiliary control apparatus.

Electrical Ratings and Terminal Connection Interface

Wiring connectivity is provided via dedicated polarized connection terminals labeled C+ and C-. When integrating the detector into low-voltage surveillance or reporting loops, the external circuit parameters must remain within the device's certified operational thresholds:

  • Contact Output Logic: Volt-free normally open (N/O), photoelectrically isolated
  • Output Interface Terminals: Polarized terminals C+ and C-
  • Maximum Contact Switching Voltage: 30V
  • Maximum Contact Switching Current: 60mA

Interfacing circuits that operate within these voltage and current boundaries can safely interface with the S-9102R without exceeding the contact's maximum operational capacitance.

Physical Mounting and Architectural Enclosure Specifications

Physical mounting compatibility is accommodated through an adaptable base design tailored for commercial facilities, offices, retail spaces, and residential applications:

  • Mounting Hole Pitch: Slotted base matches mounting hole distances from 50 mm to 74 mm, facilitating direct attachment to back boxes or structural ceilings.
  • Enclosure Material: White ABS housing engineered for clean installation in finished spaces.
  • Enclosure Dimensions: 120 mm diameter by 58 mm height (including base assembly).
  • Unit Weight: Approximately 181 g (with total package shipping weight recorded at 0.29 kg).

Power Supply and Environmental Operating Requirements

The GST S-9102R operates independently of building mains power, requiring an internal operating voltage of 3VDC delivered by a 2-piece set of AA LR6 alkaline batteries (they are not included). This power configuration delivers up to 3 years of continuous operation under normal standby conditions, during which the red status LED flashes once every 45 seconds. The device features integrated low battery indication and an integrated test/reset button for manual functional verification.

To prevent operational neglect during maintenance, the mechanical enclosure design complies with UL standards specifications by physically inhibiting the cover from closing if the AA alkaline batteries (they are not included) are missing. For environmental compatibility, the unit operates across an ambient temperature range of -10°C to +50°C and tolerates relative humidity levels up to ≤95% non-condensing, allowing deployment across diverse, unconditioned indoor environments.