Mounting Location and Environmental Planning
The Biomax K90 Pro access control and time-attendance terminal is engineered for flat wall-mounted installation directly adjacent to secured access doors. The unit has physical dimensions of 185 mm in width, 140 mm in height, and 30 mm in depth, with an overall net weight of 0.5 kg. Installers must position the unit at an ergonomic height to provide clear visibility and direct access to the 500 DPI optical fingerprint sensor, the T9 keypad input, and the integrated RFID card reader.
Operational deployment must comply with the unit’s specified environmental boundaries. The K90 Pro is rated for an operating temperature span of 0°C to 45°C and an operating relative humidity range of 20% to 80%. This terminal is suited for indoor commercial and industrial facilities, including corporate offices, server rooms, data centers, factories, bank branches, healthcare facilities, and government installations.
Power Supply and Electrical Wiring
The terminal requires an external 12V DC, 1.5A regulated power supply. Maintaining proper direct-current polarity is critical during terminal block wiring to prevent operational faults in the 500 DPI optical sensor, logic controller, and internal communications bus. For installations requiring uninterrupted access control operation during power grid outages, secondary backup batteries (they are not included) or uninterrupted power supply circuits must be integrated to sustain normal operation.
Access Hardware and Relay Integration
The K90 Pro functions as a standalone or networked access controller, equipped with an internal 12V relay output to actuate electric locking mechanisms directly. Relay lines and peripheral connections should be terminated as follows:
- Door Lock Actuation: Hardwire the integrated 12V relay output directly to the power interrupt or trigger loop of the chosen locking mechanism. The relay supports physical control of electromagnetic locks (EM locks) and electric bolt locks.
- Egress Control: Connect a standard request-to-exit push button to the dedicated exit reader input terminals, enabling users on the secure side of the threshold to release the lock without presenting biometric credentials.
- Status Indicators: The terminal features dual-color green and red LED indicators alongside an internal mini speaker to deliver real-time visual and audible confirmation during relay opening, scheduled bell alerts, and credential validation.
Network Cabling and Software Configuration Modes
The K90 Pro supports dual-mode operation and can be integrated into IT network infrastructures using two primary methods:
- TCP/IP Ethernet Network Integration: Terminate an RJ45 Ethernet run directly to the device’s TCP/IP network interface. This configuration enables real-time push-data communication with centralized servers running eTimeTracklite desktop, web, or cloud software platforms.
- Standalone USB-Host Deployment: For locations without local network drops, the device can operate in standalone SSR (Self-Service Recorder) mode. Attendance records (up to 80,000 transactions) and internal scheduling data can be transferred offline using a standard flash drive connected to the built-in USB-Host interface.
Installation Reference
| Interface / Parameter | Specification |
|---|---|
| Power Requirements | 12V DC, 1.5 Amps |
| Lock Output Control | Integrated 12V relay (EM lock, bolt lock) |
| Exit Device Support | Hardwired push button exit switch |
| Network Interfaces | TCP/IP (RJ45 Ethernet), USB-Host port |
| Environmental Operating Range | 0°C to 45°C; 20% to 80% relative humidity |
After completing physical mounting and wiring, verify power delivery, inspect the illumination of the dual green/red LED indicators, confirm relay actuation with the connected door lock, and test network packet transfer to the host software server.