Tissue Media and Fold Compatibility
The Euronics EP33 manual paper towel dispenser (KT SKU: KTI10009001EP33) is engineered to accept standard interfolded commercial hand towels. The internal loading carriage is configured to accommodate both M-fold (multifold) and C-fold tissue configurations. The unit utilizes a gravity-fed, manual bottom-pull dispensing slot optimized for single-sheet presentation, helping commercial facilities regulate per-user consumption and minimize washroom paper waste.
Consumable Dimension Limits and Stack Capacity
For smooth and jam-free manual extraction, paper towel bundles must strictly comply with the internal chamber tolerances. The maximum allowable folded towel dimensions are 255 mm in length, 80 mm in width, and 200 mm in stack height. The internal reservoir holds a maximum capacity of up to 300 paper sheets at full load.
| Parameter | Specification / Compatibility Limit |
|---|---|
| Compatible Towel Folds | M-Fold (Multifold) and C-Fold Interfolded Towels |
| Maximum Paper Bundle Length | 255 mm |
| Maximum Paper Bundle Width | 80 mm |
| Maximum Paper Stack Height | 200 mm |
| Total Reservoir Capacity | Up to 300 sheets / tissues |
| External Unit Dimensions | 282 mm (L) x 249 mm (W) x 100 mm (H) |
| Ingress Protection Rating | IPX3 (Splash Protection) |
Dispensing Chamber Tolerances and Feed Integrity
To avoid operational disruptions, facility maintenance personnel should avoid exceeding the 300-sheet threshold or loading towels exceeding 255 mm in length. Overpacking the internal chamber compresses the bottom sheets excessively against the lower dispensing throat, which creates frictional resistance and causes sheet tearing or paper jamming during a manual pull. Maintaining consumable sizes within the 255 mm x 80 mm x 200 mm boundary ensures that the self-presenting fold dispenses smoothly without binding.
The housing is equipped with a integrated front viewing window. Maintenance staff can visually monitor paper depletion levels without opening the white ABS plastic front panel, allowing scheduled replenishments before the dispenser empties completely.
Architectural and Environmental Mounting Suitability
The EP33 features an external footprint measuring 282 mm (L) x 249 mm (W) x 100 mm (H), making it suited for surface-mounted wall installations where space is constrained. The compact 100 mm profile avoids deep projection into pedestrian pathways, making the unit suitable for compact restrooms, low-to-moderate traffic commercial facilities, office buildings, healthcare environments, and hospitality restrooms.
With an IPX3 splash protection rating and a durable, moisture-resistant white ABS plastic body, the dispenser can be mounted directly adjacent to washbasin zones and hand-washing stations. It withstands water spraying and humid conditions typical of daily washroom operations.
