Back to Product
Installation

eSSL K90 Pro Mounting, Wiring, and Network Installation Guide

Mechanical Mounting and Environmental Guidelines

The eSSL K90 Pro features a compact form factor measuring 185 mm x 140 mm x 30 mm and is engineered for direct vertical mounting onto flat interior wall surfaces. When selecting an installation location, ensure that the ambient environment matches the specified operating parameters: operating temperatures must remain between 0°C and 45°C, with relative humidity levels held within 20% to 80%. Protect the 500 DPI optical fingerprint sensor from direct exposure to industrial airborne oil films, abrasive dust, and excessive ambient moisture.

Mount the terminal at a standard ergonomic height (typically 1.4 to 1.5 meters from finished floor level to the center of the 2.8-inch TFT display) to ensure clear line-of-sight for users and optimal finger placement on the optical prism. Allow sufficient clearance around the chassis perimeter for cable routing through the rear knockouts and easy access to the side-mounted USB-host port.

Electrical Connections and Power Supply

The K90 Pro requires a stable external power input rated at 12V DC, 1.5 Amps. For continuous operation during localized electrical mains outages, the terminal includes integrated power backup circuitry.

  • Power Input: Connect the external 12V DC, 1.5A power adapter to the designated terminal block connectors, maintaining strict polarity.
  • Power Continuity: Ensure all primary power connections are properly insulated before engaging mains power to charge the internal backup system.
  • Cabling Requirements: Use shielded, multi-strand copper cable for low-voltage power runs to minimize voltage drops across longer wiring distances.

Access Control Relay and Exit Switch Integration

The terminal features an integrated access control relay rated at 12V, allowing direct interlocking with third-party electric door locks, magnetic shear locks, or strike mechanisms. Exit egress circuits connect directly to the terminal's onboard input terminals.

  • Lock Relay Output: Wire the integrated 12V relay in series with the door lock hardware and external lock power source according to fail-safe or fail-secure circuit requirements.
  • Exit Device Inputs: The unit supports two distinct exit mechanism types: standard momentary PUSH BUTTON exit switches and contactless NO TOUCH infrared exit sensors. Wire the sensor signal and ground leads directly to the terminal's exit input block.

TCP/IP Network Cabling and USB Deployment

For enterprise system architectures requiring automated data collection, connect the eSSL K90 Pro to your local area network (LAN) using a standard Cat5e or Cat6 Ethernet cable via the onboard TCP/IP RJ45 port. The unit supports real-time push data transmission, which streams transaction logs directly to centralized servers.

To avoid communication interruptions, assign a static IP address or ensure fixed DHCP IP reservations on the corporate subnet. Verify that local firewalls and managed network switches do not block outbound network traffic to the central application host, as misaligned IP subnets or blocked communication ports will disrupt automated push data synchronization. In standalone deployments without local network drops, system administrators can collect logs offline by inserting a standard flash drive into the USB-host port.

Initial Configuration and Commissioning

Once wired and powered, perform system commissioning using the 2.8-inch TFT color screen and the onboard numeric keypad with T9 input:

  • Operational Mode Selection: Configure the device for Dual Mode operation by selecting either standalone Self-Service Recorder mode (SSR Mode) or networked Software Mode communicating with eTimeTracklite (desktop, web, or cloud platform).
  • Biometric Alignment: Enroll user credentials using Algorithm Version 10, managing up to 800 fingerprint templates and 800 RFID cards within the 80,000-event transaction memory.
  • Hardware Testing: Verify audio-visual feedback mechanisms by running enrollment and verification checks, confirming that the integrated mini speaker generates prompt tones/schedule bells and the visual indicators switch correctly between Green and Red status LEDs.