Back to Product
Installation

Installation and Commissioning Guide for eSSL E9C Wi-Fi

Mounting and Environmental Placement Guidelines

The eSSL E9C Wi-Fi is an indoor-rated biometric terminal engineered for wall-mounted installation across commercial, industrial, and institutional facilities. The physical unit measures 213 mm in length, 149 mm in width, and 46 mm in depth. When selecting an installation location, mount the backplate to a stable vertical surface at an average chest-level height (typically 1.2 m to 1.4 m from the finished floor level) to ensure optimal ergonomic alignment with the 2.8-inch colour TFT display, the 4x4 keypad, and the 500 DPI optical fingerprint sensor.

Site selection must conform strictly to the specified operating temperature range of 0°C to 45°C and relative humidity levels between 20% and 80%. Avoid mounting the terminal in locations subject to direct sunlight, high condensation, rain exposure, or direct radiant heat sources, as extreme ambient conditions degrade optical scanning accuracy and damage display electronics.

Electrical Wiring and Power Requirements

The terminal operates exclusively on a regulated 5V DC, 2A power supply. Power leads must be terminated directly into the supplied DC jack terminal block, ensuring correct polarity. Run dedicated power cabling to avoid voltage drop over extended conduit runs from the central distribution point.

The eSSL E9C Wi-Fi does not contain an internal battery backup mechanism. In facilities subject to grid instability or intermittent power fluctuations, the DC power input must be fed from an external uninterrupted power supply or battery backup unit (they are not included) to prevent abrupt system shutdown and ensure uninterrupted operation.

Network Integration and Wireless Setup

Network connectivity can be achieved either through wired infrastructure or wireless LAN:

  • Wi-Fi Connection: The integrated Wi-Fi module allows full network enrollment without installing structured Cat5e/Cat6 data drops. Join the device to the local wireless access point via the terminal's 4x4 physical keypad and 2.8-inch on-screen network configuration menu.
  • TCP/IP Ethernet: For wired deployments, route a standard RJ45 patch cable into the onboard TCP/IP Ethernet port. Assign a static IP address, subnet mask, and default gateway, or configure dynamic addressing via DHCP.
  • USB-Host Port: Where network conduits are unavailable, transaction logs (up to 100,000 records) and user templates (up to 3,000 fingerprints and 10,000 cards) can be uploaded or extracted manually using an external USB flash drive.

Hardware Scope and External Signaling

The E9C Wi-Fi is strictly engineered as a dedicated time and attendance terminal. It does not incorporate physical relays, Wiegand input/output ports, exit button inputs, door status sensors, or fire alarm interlocks. Consequently, installers do not need to route wiring for electronic strikes, magnetic door locks, or request-to-exit hardware.

The terminal PCB features optional hardware signaling outputs that allow site technicians to connect an external sounder/speaker and an external visual indicator bulb. These optional interfaces allow synchronized bell signaling across factory floors or educational institutions via the terminal's programmable schedule bell settings.

System Commissioning and Push Data Verification

Once powered and networked, verify connectivity using the integrated Push Data service:

Parameter Installation Specification
Power Input 5V DC ± 5%, 2 Amp regulated
Dimensions 213 mm (L) x 149 mm (W) x 46 mm (H)
Mounting Format Indoor Wall Mount
Network Interfaces Wi-Fi, TCP/IP Ethernet, USB-Host
Software Compatibility eTimeTrackLite (Desktop/Web), Web-based Device Manager / ePush Server
Operational Limits 0°C to 45°C, 20% to 80% RH

Configure the terminal's server settings to point to the host IP address of the eTimeTrackLite platform or the Web-based Device Manager / ePush server. Perform test verifications using the dual-state Green/Red LED and internal speaker feedback to validate that biometric and card transactions are pushing live records to the enterprise software backend.