Security Alarm and Intrusion Detection Control Panels
The IOTA CAP123 Electronic Capsule Siren is engineered for direct electrical integration with standard 12V DC intrusion alarm control panels and commercial security monitoring units. It interfaces directly with dedicated bell or siren output terminals capable of sourcing between 450 mA and 500 mA at nominal 12V DC. Designed to operate across an operational voltage tolerance of 10.5V to 14.5V DC, the unit accommodates standard line voltage fluctuations and battery-float states common in electronic security power supplies.
The internal C-MOS microcontroller architecture ensures that the standard continuous siren tone (spanning 800 Hz to 1200 Hz) initiates precisely at the waveform zero-point upon receiving a switching trigger. This provides immediate, transient-free sound propagation rated at 115 dB ± 2 dB at 1 meter, reaching an acoustic coverage area of 300 to 400 meters.
Access Control and Building Automation Systems
For facility access management, the CAP123 integrates seamlessly with access control controllers, door management modules, and auxiliary relay boards. It functions as an effective audible signaling peripheral for:
- Forced-door and door-held-open (DHO) alarm triggers.
- Emergency exit door release notifications.
- Perimeter security gate, turnstile, and barrier arm intrusion alarms.
- Restricted area breach signaling driven by 12V DC switched dry contacts.
Industrial Automation and PLC Control Circuits
In industrial and commercial plant environments, the CAP123 functions as an equipment alert and process warning annunciator. It can be switched directly via programmable logic controller (PLC) relay outputs or solid-state transistor outputs backed by a regulated 12V DC power rail. Its solid-state electronic assembly and high-grade ABS 300 thermoplastic body ensure stable operation across operating temperatures from 0°C to +60°C.
System Power & Interfacing Specifications
| System Parameter | Compatibility Requirement | Operational Boundary |
|---|---|---|
| Nominal Voltage | 12V DC | 10.5V to 14.5V DC functional range |
| Current Demand | Auxiliary power / Bell loop | 450 mA to 500 mA (nominal 12V DC) |
| Power Rating | Switched output capacity | 20W |
| Termination | Two-wire DC connection | Polarity sensitive (anode/cathode) |
| Duty Cycle | Continuous run limit | Maximum 20 minutes continuous activation |
Power Supply and Standalone Circuit Integration
The siren is fully compatible with standalone 12V DC power supply units (PSUs), battery backup distribution boxes, and hardwired manual panic button loops. Installers must ensure circuit wiring avoids excessive voltage drops below 10.5V DC to prevent reduction in sound pressure levels. When configuring control sequences, system programmers must observe the maximum 20-minute continuous run duty cycle limit at room temperature to avoid thermal buildup.
.jpg)